Used Della Toffola Ecp 3 Druckausführung for sale (64,362)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Fjdpfx Aljzyappsbsgg Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) Fodezxgtfjpfx Albsgg The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, Bickel HK 3/68 Description This machine, with a working width of 68 cm, is designed for economical use in perforating or grooving operations. The punching process is activated via an electrically controlled clutch that is triggered by a foot pedal. This allows the operator to use both hands to position and align the sheets. Fsdpfezxbvzex Albogg

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW Fgodpfx Alozznqkjbog 8.10 bar 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Fodpfx Aszwuraelbegg Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Manual

Condition: excellent (used), first registration: 03/2014, loading space length: 10,300 mm, loading space width: 2,550 mm, Year of construction: 2014, Equipment: tail-lift, Möslein 3-axle trailer, 30 tons, SAF axles, year of manufacture 2014 For sale is a Möslein 3-axle trailer from the year 2014. A solid and heavy-duty trailer with a permissible total weight of 30,000 kg. The trailer is equipped with 3 SAF axles and is suitable for professional and heavy-duty transport applications. Thanks to its robust construction, this Möslein is versatile. Technical data: Fgsdpfx Ajzzqw Hslbog Manufacturer: Möslein. Year of manufacture: 2014. First registration: 24.03.2014. Number of axles: 3. Axles: SAF. Permissible total weight: 30,000 kg. Heavy and robust design. Suitable for professional transport applications. Dimensions: Loading platform height: 0.87 m. Loading platform length: 5.58 m. Gooseneck length including bend: 2.35 m. Length of loading ramps: 2.60 m. Additional ramp section to the ground: 0.70 m. Thanks to the long loading ramps and the low loading platform height of 0.87 m, the trailer is suitable for loading and transporting various machines and equipment. The Möslein is in a well-maintained, used condition. The trailer can be inspected and tested at our location in Deventer, Netherlands. For further information, photos, videos, or technical data, please do not hesitate to contact us. Pieter Haverhoek. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. Netherlands. Tel. = Further information = Payload: 30,000 kg Loading platform: 30,000 kg Height of loading platform: 85 cm Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Fgedpfx Alezwuc Ssbjg Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: like new (used), Kunzmann WF 7/3 Fjdpfxezy Uh To Albjgg Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Highlights High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Fgedpfx Alozwb Unjbjg Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Year of construction: 2012, condition: used, Two identical reflow soldering ovens with different years of manufacture (2008/2012) are offered. Working width: 45mm-516mm, clear passage height top/bottom: 35mm/37mm, max. conveyor speed: 2m/min, drive: pin chain conveyor, heated/cooled process zone: 3725mm/1115mm, heating cassettes: 20, control: PLC. Machine dimensions X/Y/Z: approx. 6265mm/1201mm/1375mm, weight: approx. 1900kg. Inspection possible by arrangement. Fodezvv Itepfx Albjgg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Effective cutting length: 4000 mm Blade diameter: 500 mm Fgedpfxozrhuwj Albeg Electronic tilting of the inner/outer saw heads Tilting range: 22.5° to 135°

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: IRB 120, overall weight: 25 kg, load capacity: 3 kg, Equipment: documentation/manual, The ABB IRB 120 is the smallest six-axis industrial robot from ABB, distinguished by its low weight of 25 kg, a payload of 3 kg, and a reach of 580 mm. It is ideal for rapid assembly, handling, and educational purposes. Year of Manufacture: 1x2018, 4x2023 Operating Hours: 21,294 (YOM 2018), 2482 to 4031 (YOM 2023, 4x) Manipulator Type: IRB 120-3/0.6 RobotWare_6.14.0139 709-1 DeviceNet Master/Slave 888-3 PROFINET Device 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 616-1 PC Interface 617-1 FlexPendant Interface Fjdpfxezp Siyj Albogg 623-1 Multitasking Pendulum Calibration Axis Calibration 🔧 Robot Service and Refurbishment We provide complete service and refurbishment for industrial robots. ⚙️ Spare Parts We sell spare parts and also provide professional repair and refurbishment services for them. 🤖 Robot Sales with Warranty We supply industrial robots with a warranty for commissioning or with a warranty of up to 12 months. 🏭 More than 13 Years of Experience We have been operating in the market for more than 13 years and offer experience, technical know-how, and our own service infrastructure. Do you need service, a spare part, or a robot? Contact us.

Condition: excellent (used), Year of construction: 2001, Device description: working width 950 mm calibrating unit with a metal roller combined unit with a rubber roller and a shoe pneumatically adjustable shoe star-delta starter pneumatic oscillation controlled by photocells Fgedpfozxzg Hsx Albeg two feed speeds for the conveyor engine power 11 kW year of manufacture 2001 power supply 400V weight 975 kg

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. Fjdpfx Alozx Eftobsgg The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, CNC-controlled vertical machining center AXA VSC-3-3000-M Year of manufacture: 1995 Control system: Heidenhain TNC 407 Technical data: X-axis travel: 3000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table size: approx. 3000 x 500 mm Spindle connection: SK40 Speed range: up to 6000 rpm 22-tool automatic tool changer Coolant system Heavy-duty frame construction Special features: Additional angular/universal milling head 4-/5-axis machining possible Flexible machining of complex workpieces Ideal for toolmaking, mechanical engineering and single-part production Fjdpfx Aey U Hy Tolbogg The machine is in good condition. Inspection under power is possible by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Fsdpeyr N Erefx Albsgg Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, grinding height: 160 mm, 1. calibration roller unit 2. electronic shoe unit Fgjdpfxewhqmwe Albsg 3. electronic shoe unit stable industrial machine for calibration, fine sanding and lacquer sanding

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Fsdpfx Aezg Il Solbsgg Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: used, Year of construction: 2011, functionality: unexamined, Equipment: documentation/manual, IRS Robotics® – Reliability as Standard Established 2002 KUKA KL 1500-2 and KL 1500-3 7th Axis Robot Linear Rail – available in various lengths Includes our warranty. Inspected by our in-house robotics engineers. Brand: KUKA Type: KL 1500-2 and KL 1500-3 Currently available lengths and types (while stocks last): Overall length KL 1500-2 (older generation) = 4400 mm Overall length KL 1500-3 (newer generation) = 15909 mm Optional: We can supply the robot with a KUKA robot. Complete with 7th axis drive unit, including integration into the robot controller, motor, cable chain, grease pump, fully functional and operational. Applicable to the following KUKA robot types (availability upon request): Fgsdpfx Alezh Hfyebjg KR 30 to KR 125 KR 150 KR 200 KR 360 KR 500 About: Our daily business revolves around the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established 2002. We ship worldwide.

Condition: used, Year of construction: 2002, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, table width: 100 mm, table length: 3,100 mm, table height: 1,000 mm, throat depth: 380 mm, distance table to ram: 335 mm, clearance between the columns: 2,650 mm, total length: 3,300 mm, total width: 1,850 mm, total height: 2,550 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, This BEYELER PR 3 press brake represents a reliable solution for sheet metal bending operations. Equipped with a CYBELEC DNC 1200E CNC control system, it has a bending force of 100 tons, a useful length of 3,100 mm, and 3-axis control (X - Y1 - Y2). The machine is complete with DSP Laser safety light barriers and is supplied with a set of tools. Key features: * Year of manufacture: 2002 * CNC: CYBELEC DNC 1200E Fjdpszrtt Eefx Albsgg * Working force: 1000 kN (100 tons) * Bending length: 3100 mm * 3-axis control (X - Y1 - Y2) * Maximum stroke: 200 mm * Distance between uprights: 2650 mm * DSP Laser safety light barriers Equipment: - Machine complete with 1 set of tools - Operating manual - CNC manual - Electrical diagrams - DSP Laser light barrier manual - CE declarations of conformity Otto Machine For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2014, X-AXIS TRAVEL: 6000 MM Fgodpfxszwlzrj Albjg Y-AXIS TRAVEL: 2000 MM Z-AXIS TRAVEL: 1250 MM ISO 50 DIN 69871-A MAX SPINDLE SPEED: 4000 RPM HEIDENHAIN iTNC 530 CNC ELECTRONIC HANDWHEEL 40-POT TOOL CHANGER AUTOMATIC INDEXING HEAD 1° x 3° 2500 X 2500 MM ROTARY TABLE, 20 TON LOAD CAPACITY NR 2 2000 X 2000 MM FIXED PLATES CHIP CONVEYOR EXTERNAL AND INTERNAL COOLANT (20 BAR) YOM 2014

Condition: used, Year of construction: 2006, machine/vehicle number: 15231, Format Parts: 0.375 Bord 0.375 Schleg 0.5 Bord 0.75 Bord  0.75 Schleg 1.0  Bord   1.0 Schleg 1.5l Bord   1.5 Schleg Seriennr.: 15231 Technical data: working direction: right-left, rotative, counter clockwise capacity bph max.: 8000 labels: self adhesive labels Fgjdszx Dcqepfx Albog number of labelling stations: 3 number of bottle plates: 8 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, Year of construction: 1992, functionality: unexamined, Used CNC tool milling machine, Fehlmann Picomax 51-CNC 3, year of manufacture 1992. Last documented inspection: 03/31/2023. Technical data: - Travels X/Y/Z: 420 / 240 / 120 mm - W-axis: 450 mm - Table: 730 x 280 mm - Distance from table to spindle: 0–560 mm - Maximum table load: 75 kg - Spindle power: 4 kW - Torque: 45 Nm - Speed: 50–9,000 rpm - Tool changer: SF32 - Feed rate X/Y: 1–7,200 mm/min - Feed rate Z: 1–3,600 mm/min - Drilling capacity in steel: up to 20 mm - Thread cutting: up to M20 - Milling: up to 20 mm - Weight: approx. 1,300 kg - Connection: 3 x 380 V / 50 Hz, 10 kW - Positioning accuracy: 0.01 mm on 400 mm Fgsdezrnymepfx Albog - Repeatability: 0.002 mm Extensive accessories and documentation as shown in the photos. Location: 65618 Selters, Germany.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, VEMAG HP 3 | Vacuum Filler Fodpfx Aljzdviasbsgg Manufacturer: VEMAG Maschinenbau GmbH Model/Type: HP 3 Serial number: 170 0068 Year of manufacture: 2013 Power supply: 3-phase, 400 - 466 V, 50/60 Hz Rated current: 7 A Power: 4.5 kW Short-circuit current rating (SCCR): 5 kA rms Electrical diagram (E-Diagram): 170 890 002e The VEMAG HP 3 industrial vacuum filler is an advanced device designed for continuous and precise filling and portioning of various types of products. This machine, manufactured by the renowned German leader in the meat processing machinery industry – VEMAG – is ideally suited for use in medium-sized and large meat processing plants (butcher shops, sausage factories), as well as in the delicatessen, bakery, and catering sectors that produce on a large scale. The core of the device is a proven, dual auger system that guarantees extremely gentle handling of the raw material. As a result, the structure of the product (e.g., meat filling, liquid or semi-liquid masses) is not damaged, which directly translates into an ideal cross-section and consistent quality of the final product. The vacuum technology effectively eliminates air bubbles from the mass, ensuring better binding, color stability, and longer shelf life of the finished product.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Hydraulics – Control block for a 40-liter pump. Four identical units are available. Fgodpfozk Exdex Albog Price per block: €400. These have not yet been installed.