Used Danfoss Vr3 for sale (195)

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm Djdjzhma Depfx Al Aoku - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: reconditioned (used), We offer a CARNITECH screw conveyor with feeding hopper – an industrial set designed for conveying, feeding and dosing raw material in food processing plants. The system is suitable for production lines where stable, controlled and efficient product feeding to further processing machines is required. The set consists of a feeding hopper and a screw conveyor, often referred to as an inclined screw feeder. This solution allows the product to be conveniently loaded into the hopper and then smoothly transported to the next stage of the process, for example to a mixer, grinder, bowl cutter, separator, forming machine, packaging machine or other production equipment. The CARNITECH screw conveyor and hopper are equipped with motors of 4 kW and 2.2 kW, ensuring efficient operation even in demanding production conditions. The control system is equipped with frequency inverters from renowned brands Fuji and Danfoss, allowing smooth speed adjustment and adaptation of the machine operation to the type of raw material and the capacity of the entire line. A major advantage of the system is the possibility of smooth speed regulation and reverse operation, meaning the direction of rotation can be changed. This gives the operator better control over the feeding process, helps reduce the risk of blockages and allows the machine to be adjusted to current production needs. The safety system is designed using components from the well-known and respected company Pilz, which increases operator safety during daily operation. The system can be used as a standalone conveying unit or as part of a larger technological line in meat, poultry, fish processing plants and convenience food production. Djdpfozi U H Usx Al Ajku Technical data: Manufacturer: CARNITECH Type: screw conveyor with feeding hopper Set components: screw conveyor / inclined screw feeder + feeding hopper Motor power: 4 kW and 2.2 kW Control: system with frequency inverters Frequency inverters: Fuji and Danfoss Speed regulation: smooth Reverse operation: yes Safety system: Pilz components Application: conveying, feeding and dosing of raw material Main advantages: stable feeding of raw material to the production line set consisting of a feeding hopper and screw conveyor 4 kW and 2.2 kW motors smooth speed adjustment possibility of reverse operation frequency inverters from Fuji and Danfoss safety system based on Pilz components efficient operation in demanding production conditions possibility of integration with other food processing machines solid industrial construction solution for automation of raw material transport

Condition: good (used), Drawbar head, control unit, steering system, steering unit, steering control unit, steering orbitrol -Manufacturer: Toyota, Steering control unit with steering system for forklift trucks -Steering control unit: Danfoss OSPC 100 ON 150N1066 steering orbitrol -Dimensions: see photos Dedpfx Aezg U Hcel Asku -Price/Fee: complete -Transport dimensions: 620/370/H355 mm -Weight: 16.5 kg

Condition: used, hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 Dkjdpfxokahlao Al Aeu -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg

Condition: used, mileage: 730,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Radio/Multimedia system - Rotating beacon - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Auxiliary heater - Automatic auxiliary heating system - Toolbox - Windshield Internal number for customer inquiries 4-264 MAN TGX 26.500 6x4 short log truck with TajfunLiv 150Z 9.6 loading crane. Vehicle description: Truck: MAN TGX 26.500 6X4 BL, wheelbase 4500mm Engine D2676LF51 - 500 hp / 368 kW EURO6 SCR - 2500 Nm C-R OBD-C Transmission software for off-road use (TipMatic OFFROAD) Transmission ZF 12 TX 2821 OD MAN TipMatic with ZF Intarder Auxiliary drive 2 NA NTX/10 without flange f=0.96 above and NTX/10 with flange f=1.31 below Parking brake with pneumatic application of the front axle brakes Cab with medium-high raised roof 'XLX', 2440mm wide, 2280mm long Equipment packages Comfort Package 1 Driver MAN Media Package Navigation Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating Auxiliary air heater EBERSPÄCHER D4S Air conditioning AC R134A CFC-free with automatic temperature control 1 sleeping berth with storage space (aluminum frame) Mattress for sleeping berth below Radio MAN Media Truck Advanced 12V with 7' display and navigation preparation Navigation SD card EUROPE COMPLETE Hands-free functionality "Comfort" for 2 mobile phones (MFL and Bluetooth® compatible) Body: OptiPa platform body 4 ExTe D5 platforms with 8 ExTe aluminum telescopic load securing bars Stable steel front panel Access possibility on the co-driver side Access ladder on the driver side Toolbox on the co-driver side Two snow chain holders Tire cover, new Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic timber loading crane Classification according to EN12999 Declaration of conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internally routed hoses in telescopic extensions Slewing mechanism Slewing range 425° Control block PARKER H170CF Telescopic outrigger Outrigger legs can be swivelled up to 45° Dodpfx Aloylnpce Aeku Outrigger plate rigid Outrigger control with electro-hydraulic valve Danfoss PVG 32 Dead point above the cab Two-circuit system Knee lever on the lifting cylinder Lifting cylinder protection Hour meter Headlight on the pivot arm Spare parts catalog and operating manual in German Endless rotator 10 t Seat heating LED work light Tilt switch Start / Stop function - Linear lever control (4+2) - Grab GO53x This is a non-binding offer. Subject to prior sale, errors and changes. General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVWR: 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: ...

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control Djdpfozcr N Iox Al Asku 1 LED work light mounted on the knuckle arm 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Dodozcr N Uspfx Al Asku Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Dsdpfx Aezcr Nzjl Ajku Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: new, DANFOSS Pack Controller AKPC781A 080Z0191 2204180 Dedpfxswm Dq Ho Al Aoku Function: Pack with heat recovery Communication: EA expansion Weight: 0.645 kg Analog inputs (AI): 11 Digital outputs (DO): 8 Maximum number of expansion modules: 11 Maximum number of fans: 8 Maximum number of compressor safety signals: 6 Maximum number of compressors: 10 Protection class: IP10 Display options: MMIGRS2, EKA 163B, EKA 164B, EKA 166 Frequency: 50/60 Hz Division: 25 Supply voltage: 24 V Power consumption: 8 VA

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Dkodpfx Aox A Nn Tsl Aeu Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Dksdpfxox A Npdo Al Aeu Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Dedpfx Ajhabllsl Aoku -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: P01740 F 01278 / 21, type of input current: AC, total height: 310 mm, total width: 430 mm, total length: 570 mm, input voltage: 230 V, overall weight: 48 kg, Equipment: type plate available, The UVR-300 universal vibrator enables fast and fully automatic feeding of various stud diameters up to M8 without the need for retooling and adjustment work. Dkedpfx Aot Aktksl Aeu Condition: Slight signs of use, as the universal vibrator was only used once as a demonstration unit. Working range: SOYER threaded bolts and pins with flange M3, M4, M5, M6, Ø 7.1 and M8 from 6 - 40 mm in length Feed rate: approx. 20 - 50 studs/min, depending on dimensions Filling quantity: max. 6 kg Vibrator bowl Ø: 300 mm Compressed air: 5 - 7 bar Mains connection: 115/230 V, 50/60 Hz (115 V possible via ballast) Dimensions: 430 x 310 x 570 mm (W x H x D) Weight: 48 kg Scope of delivery - Universal vibrator UVR 300 - Conversion kit for M3 - M8 We deliver free domicile, duty paid and taxed (DAP, duty paid).

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 38,900 mm, total length: 9,800 mm, · Drehung 360 Grad (durchgehend) · Nennleistung 175 kW (238 PS) bei 2.300 U/min · Max. Drehmoment 975 Nm bei 1.380 U/min · Hubraum 5,13 l · Zylinderzahl 4 in Reihe · Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung · Kühlanlage Wassergekühlter Ladeluftkühler · Antrieb: Hydrostatisch · Modell Danfoss / Rexroth · Max. Druck 480 bar · Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. · Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt · Typ Achsen mit Planeten-Endantrieben · Hinterachse Lenkende Pendelachse mit hydraulischer Sperre · Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad · Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt · Feststellbremse Negativbremse, hydraulisch betätigt · Reifengröße 445/65 R22,5 · Max. Fahrgeschwindigkeit 40 km/h · Max. Zugkraft am Lasthaken 152 kN · Steigfähigkeit 65% · Wenderadius (mit Gabelzinken) 6.970 mm · Dieselkraftstoff 270 l · AdBlue 40 l · Motoröl 16 l · Kühlflüssigkeit 40 l Dkjdpsxd E Npofx Al Aju · Max. Betriebsdruck 350 bar · Anlagentyp Load sensing · Betriebspumpe Danfoss / Rexroth - Verstellpumpe · Verteiler für Ausleger- und Oberwagenbewegungen Danfoss - Elektroproportionalventil SIL 2 · Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren · Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range Dkjdpfx Alsx A Nnte Aeu All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: good (used), functionality: fully functional, ROSLER PARKER vibrator Type VR 30 Internal tank dimensions: 1170 x 500 Depth: 500 Lining in good condition. Dodpfjzr Hb Njx Al Aeku Can be seen in working order at my workshop.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 174 kW (236.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,660 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,700 mm, total height: 2,240 mm, warranty duration: 6 months, AIRCOOLED CHILLER KTK JWA FC 172 S/K/P PS 174 KW Cooling capacity: 174.0 kW / 49.47 tons (15/10 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH184A4ALB (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM90B14S2/330 E3 Dimensions: 4.7x1.1x2.24 m Weight: 1660 kg Working hours: 4174/4174/4174/4174 h.h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; Dkedpfx Alezvbi As Aju - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dkodpfx Aljzqzrgs Aou Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 261 kW (354.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,564 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,420 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBP 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Dodozxnfiopfx Al Aoku Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. (Frequency inverter) Dimensions: 2.42x2.26x2.3 m. Weight: 1564 kg. Working hours: 602/592/1937/1912 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 181 kW (246.09 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,913 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,460 mm, total height: 2,370 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RB0182 B0394 PE 181 kW Cooling capacity: 181 kW / 51.47 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Djdozwvmfepfx Al Aoku Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. DANFOSS SH300B4ACC (scroll) + 2 pcs. DANFOSS SH240A4ACE (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump WILO DPL65/130-4/2, expansion vessel. Dimensions: 2.46x2.3x2.37 m. Weight: 1913 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 20,800 mm, fork length: 1,200 mm, total length: 7,760 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump Dodey Hmg Dopfx Al Aoku - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,580 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,340 mm, total height: 2,290 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06 Y 0294T 270 KW Cooling capacity: 270 kW / 76.77 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 4 pcs. DANFOSS DSH295A4APC (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3 Dimensions: 4.34x2.25x2.29 m. Weight: 2580 kg. Working hours: 6233/6233/6233/6233 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Dkedpfozxdcdjx Al Aju The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request Dksdpfx Aloxaadao Aeu - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 109 kW (148.20 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,300 kg, input voltage: 400 V, total width: 1,160 mm, total length: 3,080 mm, total height: 1,940 mm, warranty duration: 6 months, AIRCOOLED CHILLER UNIFLAIR ISAF1221A 109 KW Cooling capacity: 109 kW / 31 tons (12/7 — 35°C) Year of manufacture: 2014 Options: Hydraulic module. Freecooling. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Danfoss VSH170AGANA (scroll, inverter) + 1 pcs. Danfoss SH180B4ABE (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Lowara CIE370/5/D (inverter) + 1 pcs. Lowara CIE370/2/D (Freecooling), expansion vessel. Dimensions: 3.08x1.16x1.94 m Weight: 1300 kg Working hours: 23605/11758 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Dkedpjzwu Ubefx Al Aju Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. Dksdpfx Alek Sgwas Aou perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581