Used Cordia Dotn-300 for sale (12,984)

Condition: used, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Lsdpju Ecrxefx Ab Aohn Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Weight: 390 kg More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Lhodpfx Aowbdv Sob Asn Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Lhodpfjxqghtjx Ab Ajn Airflow: 300 m³/min Suction connection: 40/50 mm Weight: 30 kg

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Two glue application speed settings Safety switch Lhjdpfx Abez E U E Hj Aon Mobile design

Condition: used, functionality: fully functional, Due to an upgrade, we have a control unit for a MAWERA heating system available. Lhjdpfxsz Iky Ej Ab Ajn The touch panel was replaced 2 years ago. The control unit is in perfect working order. Price: 400 EUR * 19% VAT

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Year of manufacture: 2018 Lsdpfx Absz Ipuuj Ajhn Max. furnace temperature: 850 °C Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1540mm – from above: - deflectors (barrier to prevent material from retracting) - sliding roller, metal - deflectors - sliding roller, metal - roller with saws - 2 smooth sliding rollers, metal – from below: - guide strip - deflectors - track - central track lubrication Lhedpfx Aezw Dw Seb Asn - stepless feed speed adjustment - feed motor 1.5kW - main motor 37kW - diameter of the extraction nozzle 200mm - overall dimensions L/W/H 1800x1550x1500mm - weight approximately 1700kg Advantages: - Italian made - very good condition - DTR documentation - used multi-blade saw Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip Lsdpfx Abozul Ako Ashn - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, Lifting capacity 300 Kg Magnetic field 228 x 122 mm weight 16 Kg dimensions 0,23 x 0,122 x 0,112 m Ljdpfx Abevblgao Ashn

Condition: used, functionality: unexamined, Ferwood Code: RU0005377 - Manufacturer Code: TDM 1.2-100-300-W1-000 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lhjdov Efkmepfx Ab Asn

Condition: used, mileage: 29,522 km, power: 75 kW (101.97 HP), first registration: 03/2015, overall weight: 5,000 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 2,350 kg, empty load weight: 2,650 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, onboard computer, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * Documentation available * original ONLY 29,522km Ljdpov Hb D Sjfx Ab Ashn * only 5,821 operating hours * Condition, see photos * 4x4 * All-wheel steering * Trailer coupling * from the German premium manufacturer Reinex * Special high-pressure street cleaning * High-pressure system with 300 BAR working pressure * High-pressure hose with high-pressure lance on rear reel * High-pressure wash bar from 1.55 m to 3.60 m * Ideal for footpaths and cycle paths, streets and surface cleaning * Variable operating pressure from 20 - 300 bar * Wash bar can be swiveled hydraulically from the driver's seat * With switchable jet nozzles * Automatic bar control * Distance control through adjustable wheels * Variable volume flow from 60l-230l./min. * Water tank 1,800 liters * Hydrostatic drive * 2 air-sprung comfort seats * Air conditioning * Work lights * GVW 5,000 kg. * Empty weight 2,650 kg. * Payload 2,350 kg. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, This listing is for a CAB ER6 External Rewinder. The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Lodpfx Ajxxya Sob Aehn Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Condition: excellent (used), Rotary table Diameter: 300 mm Lhedpfxoxz Tu Io Ab Aen Height: 82 mm T-slot width: 10 mm Indexing: 2 degrees per handwheel revolution Width: 400 mm Depth: 450 mm Weight: 38 kg

Condition: used, mileage: 51,000 km, power: 174 kW (236.57 HP), first registration: 11/2024, fuel type: diesel, next inspection (TÜV): 11/2027, color: silver, gearing type: automatic, number of seats: 6, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, Optional equipment: Active seat ventilation for passenger seat, Active seat ventilation for driver's seat, AMG Line, Floor mats for driver's cabin: AMG velour, Trailer load 2500 kg, Roof liner/headliner Dinamica black, Entry lighting with logo projection function, Energizing comfort control, Driving Assistance Package, Driving Assistance System: Trailer maneuvering assistant (Trailer Assist), Driving Assistance System: Live Traffic Information, Chassis damping system Agility Control, Interior trim: Decorative elements in carbon fiber look, Load compartment divider, Light alloy wheels 8x19 (AMG, 5 double spokes, black), Metallic paint, Multimedia system MBUX High (touchscreen 12.3"), Night Package, Exterior mirrors painted black, Electric panoramic sliding sunroof in front, with panoramic sunroof in the rear, Spare wheel with jack, Service system: MBUX Augmented Reality for navigation, Seat equipment: Table between 1st and 2nd row of rear seats, Seats in the load/passenger compartment: 2nd row, 3-seater bench comfort, Sports pedals made of brushed aluminum, Reinforced front axle, Permissible gross weight 3.20 t, Auxiliary heater (hot water) 3rd brake light, Storage net on the back of the rear seats, Adaptive brake light, Airbag passenger side, Airbag driver side, Ambient lighting (64 colors) cockpit and rear / complete, Dashboard upper part in imitation leather, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Outside temperature display, Lighting in the grab handle in the rear with reading spot, BlueEfficiency package, Floor covering: Carpet in the driver's area, Floor covering: Carpet in the load/passenger compartment, Brake caliper with lettering (Mercedes-Benz), DAB tuner (digital radio reception), Roof edge spoiler AMG, Design package interior, Easy-Pack package, Sliding door left electric, Sliding door right electric, Automatic activation for headlights, Rear entry handle, Door sills with Mercedes-Benz lettering (illuminated), Entry lights, Exclusive, Driving Assistance System: Breakdown management, Window in the load/passenger compartment: - fixed, rear, Window in the load/passenger compartment: - fixed, front left, Window in the load/passenger compartment: - fixed, front right, Parking brake electric, Sliding door lock (active), Footwell lighting in front, Generator 250 A, Cup holder in the rear, Grab handles in the rear, Glove compartment lockable, Rear tailgate with automatic opening and closing system, Rear window can be opened, Induction charging cradle for smartphone (Wireless Charging), Interior mirror, digital (camera system, can be switched off), Body/structure: Bus, Child lock, Child seat recognition in the passenger seat (automatic), Folding table and decorative element (illuminated) on the backrest of driver and passenger seat, Climate control in the rear (Tempmatik), Instrument cluster with variable display (Widescreen Cockpit), Comfort climate control Thermotronik, Communication module Mercedes me connect (Internet-based services), Head airbag system (window bag), Head airbag system (window bag) in the rear, Fuel tank with misfueling prevention, Fuel tank: 70 liters, Radiator grille with LED light band, Cargo lashing points / tie-down rings, Steering wheel (steering column mech. adjustable), Heated steering wheel, Steering wheel with multifunction, Headlamp range adjustment, Mercedes-Benz emergency call system, Center console in front with roller blind / storag Ljdpfxsz Dlxbs Ab Aehn

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Lsdoz Dt Tyjpfx Ab Ajhn Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit Lhodpfxoy Uy S Ae Ab Ajn * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: used, This listing is for Cytiva Axichrom 70/500 Chromatography Column The unit is in full working condition and ready for immediate use This low-pressure chromatography column features an automated packing design, ensuring optimal bed stability and reproducible purification runs for pilot and production-scale bioprocessing workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. Ljdpfszqf Ewjx Ab Ashn – downstream processing and purification of fermentation products

Condition: used, This listing is for Cytiva Axichrom 200/300 chromatography column The unit is in full working condition and ready for immediate use The Cytiva Axichrom 200/300 is a large-scale chromatography column designed for bioprocess purification applications. It provides controlled packing and efficient separation for purification processes, making it suitable for laboratories, research facilities and industrial bioprocessing environments For all available chromatography columns please click ?q=Chromatography+Column Transparency Report and Technical Audit: Software and Media Disclosure: Lodpfx Abezqf Hbo Ajhn As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products.

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system Lhjdpfx Aezv Ul Djb Aen - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 500 mm, spindle motor power: 10,000 W, bar diameter (max.): 52 mm, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Graziano GT 300 was manufactured in 1998. It features a maximum turning diameter of 230 mm and a distance between centers of 590 mm. The machine is equipped with a tool turret that has 12 positions and driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Graziano GT 300 horizontal turning machine we have for sale. Contact us for further details. • Main configuration • Tool turret: 12 positions, VDI 30 • Control unit: MTC 200 • Main spindle • Spindle nose: ASA 5" • Max. spindle speed: 5,000 rpm (optional 6,000 rpm) • Constant power speed range: 800–6,000 rpm • Max. spindle torque: 114 Nm at 800 rpm / 130 Nm at 1,000 rpm • Spindle power: 10 kW continuous / 14 kW intermittent • Chuck diameter: 175 mm • Spindle bore diameter: 66 mm • Front spindle bearing diameter: 100 mm • Spindle bearing lubrication: Grease • Speed ranges: 1 • Working area / Capacity • Distance between centers: 590 mm • Center height: 190 mm • Swing over bed: 330 mm • Swing over slide: 260 mm • Max. turning diameter: 230 mm • Bar capacity: 52 mm • Z-axis travel: 500 mm • X-axis travel: 160 mm • Ball screws • Z-axis: 32 × 10 • X-axis: 32 × 10 • Feed / Axes • Z-axis rapid traverse: 30 m/min • X-axis rapid traverse: 30 m/min • C1-axis rapid speed: 100°/min • C1-axis torque: 130 Nm • Z-axis thrust: 4,500 N (CNC adjustable) • X-axis thrust: 4,500 N (CNC adjustable) • Measuring system Ledpfx Aszzmhbjb Aehn • Z-axis: Absolute rotary encoder (linear optional) • X-axis: Optical scale • Linear axes X/Z resolution: 0.001 mm • C-axis resolution: 0.001° (optional) • Tool turret / Driven tools • Driven tools: Yes • Turret: Sauter Type 0.5.450.216 • Tool positions: 12 • Tool interface: VDI 30 • Tool shank section: 20 × 20 mm • Driven-tool speed: 4,000 rpm • Driven-tool power: 4 kW • Driven-tool torque: 20 Nm • Electrical equipment • Voltage: 400 V ±10% • Frequency: 50/60 Hz ±1% • Connected load: 24 kVA • 400 V line protection fuses: 50 A • 400 V line circuit breaker: 39 A • Connection cable section: 4 × 10 mm² • Hydraulic unit • Max. working pressure: 45 bar • Tank capacity: 40 L • Pump flow: 14 L/min • Axis lubrication unit • Tank capacity: 2.7 L • Coolant system • Tank capacity: approx. 240 L • Pump flow: 30 L/min • Flow to tool: 14.5 L/min • Pressure: 5 bar • Head cooling tank • Capacity: 10 L (with heat exchanger) • Control unit • Control: MTC 200 Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size VDI 30

Condition: used, Year of construction: 1999, Used Equipment Features and Technical Specifications: - Centrifugal fan with V-belt drive - Suitable for use in both raw air and clean air applications - Steel impeller with steel blades mounted on a multi-bearing intermediate shaft - Air discharge direction GL 360/5 - Connection: 300 mm Ledpfx Abezk Niyj Ajhn - Motor power: 11 kW - Airflow: 7,000 m³/h Availability: Immediate Location: Röllbach

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total width: 300 mm, total length: 300 mm, total height: 150 mm, overall weight: 10 kg, Equipment: documentation/manual, MarSurf M400 MarSurf RD 18 Mahr surface roughness measuring instrument with evaluation unit Brand: MAHR Model: MarSurf M 300 + feed unit RD18 Probing system: Free-floating probe system Measuring principle: Skid tracing method Probe: Inductive skid probe Measuring unit: selectable Measuring range: 350 µm Profile resolution: 8 nm Parameters: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical scale: automatic/selectable Horizontal scale: dependent on the cutoff Total evaluation length according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number (n) of individual measuring lengths according to ISO/JIS: selectable 1-5 Scanning speed: 0.5 mm/s Probe tip radius: 2 µm Measuring force: approx. 0.7 mN Lhodpjz E Rkxofx Ab Ajn - Bluetooth connection between the feed unit and the display unit. - Measurement in all directions: horizontal, vertical, and overhead. - The battery in the feed unit and the central unit was replaced in 2025. - A roughness standard for calibration is included in the feed unit. - A new measuring tip is included, Mahr PHT6-350. The device is being sold because we had to purchase a combined contour and surface measuring instrument. You are welcome to come and inspect the device. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale.

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. • Rotor diameter: 300 mm • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) Lhjdpez E R Rxjfx Ab Aen • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)

Condition: excellent (used), functionality: not functional, stroke length: 250 mm, overall weight: 19,000 kg, clearance between the columns: 3,100 mm, Equipment: documentation/manual, safety light barrier, GASPARINI PRESS BRAKE 4000 X 300 DELEN SA 24 E CNC Lhodpfxjz Ekrpe Ab Aon 4 AXES MODEL: PSG300/4000 USED MACHINE INTERNAL CODE: SVR 364

Condition: used, Year of construction: 2002, functionality: fully functional, Conveyor Belt SCHUMA PRO-WA500/2000/300/S20 (2002) Lsdpszhuziofx Ab Aehn Dimensions (m): 2,5x0,51x1,35 (LxWxH)