Used Claas Shredder for sale (987)

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Hodpfx Agezc I S Eetjfl Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. If you have any further questions or require additional information, please send us a message or call.

Condition: used, Year of construction: 2015, operating hours: 6,877 h, functionality: fully functional, overall weight: 25,000 kg, We offer this used Doppstadt Buffalo DW-3060 Type D with HS-401 return system for sale: Operating permit no.: e13*2007/46*1470 Vehicle identification no.: W09306325F2D38792 Permissible total weight: 25000 kg Hfedszavxzopfx Agtol Permissible axle load 1: 8000 kg Permissible axle load 2: 8000 kg Permissible axle load 3: 8000 kg Permissible support load: 1000 kg Type: DW3060 Type D Year of manufacture: 01/15 Serial number: 792 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, feed hopper 169x123 cm hydraulic pressure drawer control from control panel motor power 15 kW Hfjdpfey Sgd Tsx Agtsl shaft width 600 mm

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,860 h, functionality: fully functional, machine/vehicle number: 3155220747, overall weight: 458 kg, rotor diameter: 300 mm, number of blades: 5, total length: 1,130 mm, total height: 1,570 mm, total width: 1,000 mm, power: 6.1 kW (8.29 HP), type of input current: three-phase, input voltage: 380 V, blade width: 300 mm, Equipment: documentation/manual, The compact SINCRO 315 EKO granulator is designed for recycling rigid and flexible cables. By shredding and subsequently dry-separating the material, it effectively separates copper and aluminum from insulation (such as plastic, rubber, or paper). The machine can be fed either manually or automatically by adding a conveyor belt, according to user requirements. The SINCRO 315 EKO cable shredder is fully soundproofed and consists of the following components: - Granulator with three rotary and two fixed adjustable knives, as well as a screen perfectly matched to the granulator. - Control panel with an intuitive arrangement of control buttons. - Adjustable, easily accessible vibratory dry separator. Hfodpfxoy Sh Dbj Agtjl - Two completely independent air circuits, which reduce maintenance needs and enhance the sorting process. Performance: - Up to 130 kg of input material per hour, depending on the type and size of the processed material and screen. - Combining it with a PMG pre-shredder increases throughput and reduces component wear, as ferrous parts are separated using a magnet installed on the conveyor, also reducing labor requirements. Processes unshredded cables: - Flexible copper cables up to Ø22–25 mm - Rigid copper cables up to Ø20–22 mm - Aluminum cables up to Ø20–25 mm Your benefits: - Best price/performance ratio - Quick return on investment - Machine retains high resale value - Compact, ideal solution for limited spaces - Environmentally friendly with low energy consumption and low noise - Capable of recycling a wide range of materials - Easy operation and maintenance

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Weight 1300 kg Hjdsyk H Tqepfx Agtofl

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Hfedpezh Hlgsfx Agtsl Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor Hfsdpfx Agozh Ti Ejtol The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: excellent (used), Year of construction: 2022, operating hours: 216 h, functionality: fully functional, overall weight: 1,250 kg, rotor diameter: 260 mm, number of blades: 14, total length: 1,880 mm, total height: 1,670 mm, total width: 1,120 mm, rotor length: 550 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 120 rpm, hopper volume: 400 l, rotational speed (min.): 80 rpm, warranty duration: 3 months, Machine in very good condition. Manufactured in December 2022. Reuser SD 60, 18.5 kW The single-rotor universal shredder, Robust Reuser SD 600, is a symbol of strength, determination, and uncompromising performance. It operates according to its own rules, but in perfect harmony with your needs. Its minimalist yet distinctive design gives it a touch of timelessness. Hedpfx Aszlm T Ejgtefl Advantages: Single-rotor shredder Material feed via excavator, forklift, or hydraulic lifting arm Unitronics® PLC control unit Hydraulic unit with 20 liters of oil

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45 kW Immediately available demonstration machine – as new condition For sale is a new material shredding machine MHR 1030-45 kW from our exhibition and demonstration stock. The machine is immediately available and can be inspected and demonstrated by appointment. Due to the elimination of the usual production and delivery times, the system is ideal for companies that require additional shredding capacity in the short term. Technical data Infeed opening: approx. 1,030 x 1,235 mm Hopper design: inclined Hopper volume: approx. 1.5 m³ Rotor diameter: 360 mm Rotor design: standard Cutting system: 25 concave knives + 25 square knives Screen size: 25 / 30 mm (optional) Main drive: 45 kW Power connection: 400 V / 50 Hz / 3 phases Hfjdpfx Agjzhx Elotsl PLC control Control cabinet completely wired including 5 m connection cable Hydraulic slide with pressure bar Equipment Automatic star-delta start Automatic idle detection with shutdown Cyclic control to avoid unnecessary idle times Performance-enhancing step control for the hydraulic slide Vibration-dampening machine feet Solid base frame Control cabinet extension for integration of conveyor belt and overband magnetic separator Painting Machine body: RAL 9005 Deep black Hopper and drive guard: RAL 5012 Light blue Application areas Suitable for shredding: Wood and wood waste Plastics Packaging materials Production waste Commercial and industrial waste Recyclable materials for further processing ✔ New machine from exhibition stock ✔ Ready for demonstration ✔ Immediately available ✔ No production or delivery time ✔ Inspection and test run possible by appointment Price, net plus VAT Further information, videos or an individual offer can be provided upon request.

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Operating hours: 7293 h Minimum footprint: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) - 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes Hfsdjzmul Ejpfx Agtjl If you have any questions or require further information, please send a message or contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,400 mm, total width: 1,440 mm, total height: 3,000 mm, overall weight: 6,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 90 kW (122.37 HP), rotor length: 1,080 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Hfedpfx Agoyypp Ietjl Mizar Recycling Machinery

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control Hodeyxkwqjpfx Agtsfl - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available.

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable Hsdpfx Aoyhzhnegtsfl At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. Hsdpsyhzhzjfx Agtsfl The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Year of construction: 1999, condition: used, Plastic shredder Hsdpey R D Iaofx Agtofl

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 330, rotational speed (max.): 2,900 rpm, motor model: 5,5kW, Equipment: CE marking, STYROFOAM/STYRODUR GRINDER KP2 5.5 kW three-phase 400V electric motor Circuit breaker 1:0, power cord, 5-pin 16A plug 500 mm diameter grinding drum with hopper feed two granulate outlets with rubber clamps single-direction rotary knife with double blades 13 mm diameter screens positioned around the grinding drum operating capacity min. 4 m³/h The crusher allows the resulting granules to be bagged directly into bags or plastic sleeves, which are secured to the outlets using elastic rubber straps. All our shredders come with complete technical documentation (DTR), CE certification, and professional operating instructions Hedpfxey Nantj Agtsfl

Condition: excellent (used), EPS CRUSHER / SHREDDER / GRINDER – GRINDER N. 1 For sale: a professional, high-efficiency EPS (expanded polystyrene) shredder/grinder, designed for continuous operation within a technological production line. Unlike standalone machines that require manual feeding or separate conveyor loading, this unit is specifically engineered for installation directly underneath an EPS cutting line. It automatically collects, crushes, and reduces the volume of both side and bottom waste material as it falls onto the conveyor belt during the cutting process. Hedpjzc Hnlsfx Agtjfl PRICE: Original Price: 6,500 EUR New Price: 5,900 EUR Technical Specifications: External Dimensions (L x W x H): 191 x 120 x 64cm Inlet Dimensions: 148 x 38cm Drive System: Heavy-duty 7.5 kW gear motor (motoreducer) Shaft Configuration: Dual-shaft drive via heavy-duty gears (both shafts are actively driven) Tags: EPS shredder, polystyrene crusher, EPS grinder, recycling equipment, volume reducer, styrofoam shredder, compactor, waste processor.

Condition: used, functionality: fully functional, total width: 1,800 mm, total length: 3,420 mm, total height: 1,350 mm, number of blades: 9, overall weight: 10,000 kg, M&J 2000SHDC Shredder (used machine) – robust single-shaft pre-shredder for wood, bulky waste, and commercial waste. Reliable and powerful for continuous operation. Price: €65,000 Hodpfx Aszdp Dqsgtefl Location: Merano (South Tyrol) - Italy

Condition: like new (used), Year of construction: 2026, operating hours: 18 h, functionality: fully functional, power: 15 kW (20.39 HP), REUSER SD600 Industrial Shredder – Demo Machine with Less Than 20 Operating Hours Economically shred residual wood instead of disposing of it at high costs. Are you looking for a reliable solution for processing wood waste, cut-offs, pallets, chipboard, or other wood residues? With the REUSER SD600, you get a powerful industrial shredder in a robust, professional design – ideal for carpentry shops, joineries, timber construction companies, pallet manufacturers, sawmills, and recycling companies. Demo Machine – Almost Like New This unit is a demo machine with fewer than 20 operating hours. The machine was only used for a few weeks at a customer's site. The customer then decided to opt for a larger machine model. Take advantage of this opportunity now and secure this almost-new machine at a significant price advantage compared to a new machine. Your Advantages ✔ Demo machine with less than 20 operating hours ✔ Immediately available – no long delivery times ✔ Technically inspected and ready for immediate use ✔ Significant price advantage compared to a new machine ✔ Robust industrial design ✔ 12 months warranty ✔ Inspection and demonstration possible at any time Ideally suited for: Carpentry shops Joineries Timber construction companies Sawmills Pallet manufacturers Furniture industry Plastic processors Recycling companies Disposal companies Suitable for: ✓ Solid wood ✓ Chipboard ✓ MDF ✓ OSB ✓ Pallets Hedpjznuhvsfx Agtsfl ✓ Wood waste ✓ Cut-offs ✓ Plastics ✓ Packaging materials

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, overall weight: 2,000 kg, rotor length: 870 mm, power: 30 kW (40.79 HP), We are offering you a test machine for various waste materials. The machine us good condition Hfsdpfxswy Ninj Agtjl

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Hedpfx Ajw Sv Rzogtsfl Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Condition: new, Year of construction: 2026, Technical Specifications: Mechanism dimensions: 800 x 640 mm Machine drive: 2 x 7.5kW electric motor Transmission: Helical gear Number of shafts: 2 pcs. Knife diameter with Shaft: Knives 310 mm Number of Knives: 40 pcs. Knife thickness: 10 mm Control: SIEMENS PLC Weight: approx. 1800 kg Main features: - A solid and reliable solution, Hfjdpfxoittpus Agtsl - Custom design tailored to the needs of an individual customer, - High resistance to heavy loads and intensive operation - Designed to shredding PP, PA6, PE plastics, pieces of soft wood, hard drives, aluminum, spiro pipes,cartoon pipes. - Uniquely designed knife shape Number and height of teeth depending on the material to be shredded. - Knives made of special materials dedicated to cold cutting and grinding - Knives made of Hardox 450 steel. - Advanced proprietary Siemens PLC control system that prevents machine blockage and significantly increases shredding efficiency - Low speed 35 rpm with high torque - Helical-bevel gear with appropriately selected power and speed - 12-month warranty. - Service in POLAND

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm Hfsdpfx Ajtpuqyegtjl ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm ✔ Weight: 1250 kg Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS Hfjdpfx Aoxmthregtjl DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Hjdpfx Aexu I T Eegtjfl Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.