Used Carl Zeiss Gom Metrology Gmbh Atos Scanbox 4105 for sale (68,964)

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Ppodpfxoy Rgk Rj Amkot

Condition: used, Year of construction: 1992, Technical details: voltage: 400/50 V/Hz air-pressure connection: 7 bar control: - pressure capacity max.: 340-375 t total power requirement: 15 kW weight of the machine approx.: 1,4 kg dimensions of machine: 1,4 x 0,8 x 1,6 m Hose and crimp press · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force ? suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology longer service life, less contamination on workpieces. Working range: All hoses up to 6SP (SAE 100R 13–14) and crimp fittings up to DN 125 or I.D. 5 Crimping range: from Ø 9 to Ø 180 mm Crimping tool: Double-wedge system (domestic and international patents) Maximum crimp stroke: Ø 20 mm Maximum adjustment range: Ø 10 mm Number of crimping programs: 3 Pedpfx Asxv Awzsmkjpt *

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg Ppjdoy N Duqepfx Amkst As new, unused, ex stock

Condition: as good as new (ex-display), Year of construction: 2025, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pjdpfeuydgjx Amkept Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Ppjdpfoi D T Iysx Amkst

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 197367, Accuracy & Performance Length measurement error (MPE): Standard: 1.5 + L/350 µm Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Ppjdpsy Sllcjfx Amkot Scanning speed: Up to 500 points/sec Acceleration: Up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) � �️ Environmental Conditions Operating temperature: 15–30 °C Accuracy guaranteed: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision

Condition: like new (used), Year of construction: 2018, functionality: fully functional, We offer a galvanized air receiver - 5000 l. Manufacturer - OKS Otto Klein GmbH. Maximum working pressure - 11 bar. Year of manufacture: 2018. Dimensions: Diameter - 1400 mm. Height - 3570 mm. Weight - 1050 kg. Air receiver including fittings - safety valve, pressure gauge, and flanges. Podpfx Ajy Slkremkjpt

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Ppsdpfx Amjyx Exvokjt

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Podjgu Nmhjpfx Amkept - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max Podpsg Dvdcefx Amkopt - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD Ppsdpotr U Hljfx Amkst → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine Ppjdpfx Aottah Rsmkst

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Ppodpfx Aex Ebzqsmkst - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement Pjdpfx Amey Sixtskspt - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal Ppedpfxsy Sixme Amkjt - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, ZEISS Comet®LƎD 8M 3D scanner, software + computer Ppedpey Sg N Aefx Amkot

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) Ppodpfx Amey I Nbmeket - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Pedpfxeytr Swo Amkopt Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: new, Year of construction: 2025, functionality: fully functional, rapid traverse Y-axis: 20 m/min, spindle speed (max.): 60,000 rpm, mount diameter: 3 mm, total width: 800 mm, type of input current: AC, table length: 320 mm, table height: 560 mm, warranty duration: 12 months, working width: 560 mm, ambient temperature (min.): 18 °C, ambient temperature (max.): 30 °C, compressed air connection: 6 bar, working length: 320 mm, number of axes: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format production panels, small series of larger format, and cost-conscious manufacturing. PCB materials with breakout tabs can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive operating from above. The machine’s highlight is its easy and straightforward switch between small (320 x 280 mm) and large (320 x 560 mm) working areas. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technique Ppsdpfx Amexmfdxekot • Flexible handling • Suitable for PCBs with breakout tabs • Milling spindle adjustment with servo-drive technology • Extraction device • User-friendly operation • Excellent price-performance ratio Manual Depaneling – flexible and cost-effective The concept of manual depaneling offers significant advantages when it comes to flexibility and cost-effectiveness. Medium production volumes can be separated quickly and with minimal dust using the LOW MINI. Standard equipment includes dual loading with linear motor technology, while single-shuttle operation is available to expand the working area. Ease of maintenance and user-friendly operation, combined with its outstanding price-performance ratio, ensure convenient operation and make investing in this depaneling machine a worthwhile choice. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives Ppsdou Smcbspfx Amkot - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status Ppsdpfsrxrrhex Amkjt - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Pedey R Taxspfx Amkept Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: used, Year of construction: 2011, Measuring machine Zeiss MC 850, year of manufacture 2011 Pedpjy R S Nfefx Amkspt

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Podpfxow Ivqmo Amkjpt Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. Psdeu Ey Dlepfx Amkept When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction