Used Cantilever Rack, One-Sided, 3.70M Height, 1.2 for sale (51,597)

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. Bdsdpfxoz A D Dgo Amroh 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Bsdez A R Irspfx Amrjdh Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: excellent (used), Pallet racking Manufacturer: Nedcon Type: PR2 Bdsdezdyi Rjpfx Amrjh 12 uprights, 4500 mm high 1100 mm deep 84 crossbars, cross-section 110/40 mm 31 shelves, chipboard, 1090 x 2680 x 40 mm Load capacity: 3 tons Very good condition

Condition: excellent (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: MPB Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 9,780 mm Number of bays / racking row: 3, each 3,100 mm Number of levels including base level: 4 Included in the scope of delivery: 04x Used pallet racking uprights Material color frame profile: hot-dip galvanized Material color truss: Sendzimir galvanized Upright type: STD´B´28 Profile dimensions: 120 x 65.5 x 2.5 mm Incl. cross and diagonal bracing, upright protectors and base plates Bdodpoz Dvmcjfx Amrjh The uprights are pre-assembled (bolted truss) Height: 6,500 mm Depth: 1,100 mm Note: Steel grade S420MC is better than S355MC 24x New pallet racking beams Material color: RAL 1007 daffodil yellow Box profile: 160 x 50 x 1.75 mm Beam type: AUF´B´E0436 Grapple: 4 hooks Clear width: 3,100 mm 48x New locking pins Material color: Sendzimir galvanized For securing the longitudinal supports against unintentional lifting out 16x New bolt anchors Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Used shims Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Wire electrode, stainless steel welding wire, welding wire -Large roll Bodpfxod Elvve Amrjdh -Wire thickness: 1.2 mm -Wire electrode: high-alloy, chemically resistant -Number: 2x casters available -Price: per package -Weight: 12 kg

Condition: used, Feed roller for a four-sided planer or multi-blade saw 5 arms with feed chains Bdedpfx Amelqxk Aersh Adjustable arms Overall machine length: 500 cm Overall arm length: 220 cm

Condition: used, Year of construction: 2008, Length: 310 cm Price: On request Four-axis planer Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Weidner buffer table Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT Bdjdjwnit Aepfx Amreh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH Bedpfxjwnmn Ro Amrodh -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Bdedpfez Elvvox Amrsh Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Catalog number: 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - All spindles equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 rubber feed rollers, including 1 double roller - 3 pressure rollers at the outlet Bottom: - Side pressure roller at the inlet - Toothed, feed roller, swiveling in the lower bed - 3 smooth, metal feed rollers - Rollers adjustable pneumatically - Length of the feed table: 1190mm - Central lubrication of the table - Electric adjustment of the cutting depth - Body lifting motor: 0.56kW - Smooth adjustment of the feed speed on an inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Enclosed in a cabinet - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approx. 5000kg Bjdpfsztzgpjx Amredh ADVANTAGES – 7 heads – Universal spindle – Ideal for wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 26960 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads Bdjdpfxjztzgio Amrsh – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: used, mileage: 199,800 km, power: 310 kW (421.48 HP), first registration: 12/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Int. No.: 215 Well-maintained Arocs 2642 6x4 with MEILLER three-way tipper and ATLAS crane * Mercedes Benz * Arocs 2642 * 6x4 * Leaf spring suspension * Permissible weight 26,000 kg * MEILLER tipper * KRAN ATLAS 120 A2 * 2x hydraulic extension * 2x fully hydraulic outriggers * 5th + 6th control circuit * Grapple available at an extra cost * REMOTE CONTROL * Differential lock * Central locking * 3-seater * Radio * AIR CONDITIONING * EURO6 * Trailer hitch 35,000 kg * Tires approx. 60% remaining Bdjdpfxoz Exa Is Amrjh * Green emissions sticker * Very good condition * First owner * VAT can be shown!!! Trade-in possible Financing available from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typing and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, mileage: 426,073 km, power: 315 kW (428.28 HP), first registration: 10/2015, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, soot filter, Mercedes-Benz Arocs 4143, three-way tipper, Meiller, with electric cover Bdsdpfxsz E Aite Amrjh * Retarder * Leaf / Leaf spring suspension * Automatic transmission * Euro 6 * Wheel formula 8x4 * Cruise control * On-board computer * Air conditioning * Refrigerator * Rotating beacons * Differential lock for the 3rd and 4th axles * Radio * Central locking * Three-way tipper Meiller without on-board hydraulics * L/W/H: 5,800 mm, 2,380 mm, 1,000 mm * Electric cover * Window in the rear wall of the cab * Tow hitch * Underrun protection, foldable Special equipment: Audio system: CD radio, CB radio, compressed air connection in the cab, compressed air horns (2) on the cab roof, Cab: tilting mechanism electro-hydraulically, Cab: steel-sprung, comfort, fire extinguisher, Transmission 12-speed - Type: G 330-12, Rear lights construction site version, Hydraulic pump (Meiller pump - 9 pistons - 296), Info display 12.7 cm with additional display, Interior filter for construction vehicles, Air intake from the front, Parameterizable special module, Retarder, Rotating beacon left/right, Protection plate under the main tank, Circuit breaker, Seats in the cab: armrest for passenger seat, Seats in the cab: passenger seat with massage function, Seats in the cab: passenger seat, sprung, air-conditioned, Seats in the cab: passenger seat backrest foldable, Seats in the cab: driver's seat with massage function, Seats in the cab: driver's seat, sprung, air-conditioned, Seats in the cab: driver's seat backrest foldable, Sun visor outside, Sunblind side windows, Driver and passenger door, Voltage converter 24V / 12V 10 A, Stowage compartment outside left, 12V socket in the passenger footwell, Additional 24V socket in the passenger footwell, Stone chip protection grille, Daytime running lights automatic, Underrun protection rear, foldable, Additional thermal insulation, Twin-plate clutch Additional equipment: Emission standard EURO 6, Axle configuration: 8x4/4, Front axle load 7.5 t, Trailer coupling: drawbar coupling Ringfeder, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Batteries arranged one above the other, Differential lock rear axle, Compressed air tank steel, Compressed air unit low, Cab: width 2.30 m, Cab: cab entrance movable, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Cab: mounting height 600 mm, Suspension: leaf / leaf, Suspension: rear springs 2x15.0 t, Suspension: front springs 7.5 t, 3 leaves, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 25 L, Rear axle bevel gear 300, Interior filter: pollen filter, Body/Superstructure: tipper, Comfort locking system, Fuel tank: 260 L aluminum, left, Steering pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 315 kW R6 Diesel (OM 470), Engine compartment encapsulation, Auxiliary drive MB 131-2c, Wheelbase 4250 mm, Ramp mirrors, Waste heat recovery, Rear window, Seat cover / upholstery: fabric, Stabilizer rear axle, Stabilizer front axle, Tachograph / EG control device, Drum brake front and rear axle, Underrun protection rear, fixed, Preparation for toll collection, Front axle straight, Water pump regulated, Permissible total weight 41.00 t, Oil cooler transmission Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. In some cases, the

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 3,516 h, load capacity: 4,500 kg, lifting height: 4,040 mm, free lift: 2,000 mm, fuel type: gas, mast type: duplex, construction height: 2,770 mm, fork carriage width: 1,350 mm, fork length: 1,600 mm, empty load weight: 6,400 kg, total length: 2,200 mm, drive type: Treibgas, construction width: 2,530 mm, Four-way side loader Load centre: 600 mm Fork width: 125 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Superelastic Front tyre size: 27x10-12 Bsdpfx Amjz Ev Agjredh Rear tyres type: Superelastic Rear tyre size: 200/50-10 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and side loaders available in our warehouses in Hamburg and Gdansk. Please visit our website - sago-online. Leasing and financing on favourable terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will advise you in detail on this C4500. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and special construction for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our premises. Fork positioner Fork positioner opening range: 430 / 1310 mm Heater, full cab, full free lift Platform height: 520 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 7,905 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,650 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Kubota, fork length: 1,200 mm, empty load weight: 8,900 kg, total height: 2,850 mm, total length: 3,900 mm, total width: 2,200 mm, maximum load weight: 5,000 kg, fuel: diesel, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, cabin, front guard, New price 21,900 EUR (previous price 25,900 EUR) Mast with free lift Very good condition We sell forklifts after a full service. Prepared for the end user. Bdsdpoz Et Dnefx Amrsh Ready to use. We can arrange transport within Europe and worldwide.

Condition: used, functionality: fully functional, load capacity per storage section: 10,000 kg, shelf height: 7,000 mm, frame height: 7,000 mm, load per truss pair (max.): 3,200 kg, frame width: 1,200 mm, Professional Dexion Speedlock P90 pallet racking – used, inspected, and ready for immediate use. 144 European pallet spaces · Shelf load capacity 3,200 kg · Bay load capacity 10,000 kg ───── TECHNICAL DATA ───── • Type: Dexion Speedlock P90 • Frame height: 7,000 mm • Frame depth: 1,200 mm • Beam length: 3,600 mm • Shelf load capacity: 3,200 kg • Max. bay load capacity: 10,000 kg ───── PARTS LIST ───── • 10x Frame P100/30 (7,000 x 1,200 mm) – pre-assembled • 54x Beams SLB130/15 (3,600 mm) • Locking pins & floor anchors included ───── SYSTEM CONFIGURATION ───── • 9 bays à 3,600 mm • 4 storage levels per bay incl. base • 144 pallet spaces (European pallet 1,200 x 800 mm) Bedpfxjz Eimrj Amrsdh ───── OPTIONAL (at extra cost) ───── • Additional frames & beams available • Wire decking, deep beams, or tension plates • Expansion with additional bays possible • Individual storage planning available on request ───── DELIVERY & INSTALLATION ───── ✔ Collection: 99428 Grammetal (near Weimar, Thuringia) ✔ Freight shipping throughout Germany on request ✔ Professional installation service available throughout Germany

Condition: used, total height: 9,000 mm, Double-Sided Cantilever • Height: 9 m Bdodpfxewq Nivo Amrjh • Maximum load capacity per column front: 8,100 kg • Maximum load capacity per arm: 900 kg each

Year of construction: 2022, condition: used, QIAGEN QIAcuity One 5plex Digital PCR System – 2022 – Tested / Operational For sale is a QIAGEN QIAcuity One 5plex digital PCR system, manufactured in 2022. The instrument powers on correctly, and the integrated QIAcuity Control Software is accessible. The system has been inspected using the built-in diagnostic interface. A Quick Test was completed successfully, and the system status screen shows the main instrument modules without any reported errors at the time of testing. The QIAcuity platform is designed for digital PCR applications, including absolute nucleic acid quantification, copy number variation, mutation detection, gene expression, and other molecular biology applications. System details: - Manufacturer: QIAGEN - Model: QIAcuity One 5plex - REF: 911020 - Serial number: 01808 - Year of manufacture: 2022 - Manufacturing date: November 21, 2022 - Configuration: 5plex - Power: 100–240 VAC, 50/60 Hz - Integrated touchscreen - Integrated QIAcuity Control Software - Product of Germany Testing / condition: - Unit powers on normally - Touchscreen operational - Control software loads correctly - Built-in Quick Test completed - System status checked - Main modules displayed without reported errors at the time of testing - Very good cosmetic condition The unit has not been assay-validated by us with QIAcuity Nanoplates/reagents, so it is sold based on the functional and diagnostic testing described above. Included: - QIAGEN QIAcuity One 5plex instrument - Installed integrated control system/software - Power cable Bedpfx Amsz Ezuzjrjdh Consumables, Nanoplates, and reagents are not included unless specifically agreed. Shipping: Worldwide insured shipping available. The instrument can be professionally packed for safe international transport. Additional photographs, serial number images, and diagnostic screenshots are available upon request.

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts Bdjdpjzrulcefx Amroh - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: pulling roller ratchets 1 metal toothed pulling shaft 2 metal sequential pulling shafts 1 metal toothed pulling shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth metal pulling shaft upper pressure roller at the outlet with 2 pulling rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth metal pulling shafts – from the rear: 2 side spindles 1) vertical right 150mm 4kW 2) vertical left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged in alternating pattern electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min diameter of the dust extraction socket 2x120mm, 150mm dimensions (length/width/height) 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting Bodpfxeztziwe Amredh – ideal for processing both wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one. Bedpfx Aozi Em Sjmrsdh

Year of construction: 2019, condition: used, overall weight: 1,400 kg, load center: 600 mm, load capacity: 12,000 kg, working range: 2,200 mm, machine/vehicle number: 449297, Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Internationaler Transport möglich/ International delivery available Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Bjdjxw I E Hspfx Amrodh Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Internationaler Transport möglich/ International delivery available Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls Bdodpfsz Hcipex Amrsh pneumatic pressure of feeding rolls grooved table

Condition: used, mileage: 345,999 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2027, color: orange, gearing type: automatic, emission class: euro6, loading space volume: 13 m³, loading space length: 5,600 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FH500 8x4 Three-Sided Tipper VIN: HB819404 Chassis / Components: * Leaf / Air Suspension * Wheelbase: 1-3= 4,600mm 1-2=2,000 mm / 2-3=2,600 mm / 3-4=1,350mm * Tires: 1st + 2nd 385/65 R22.5 + 3rd + 4th 315/80 R22.5 * Tire Tread Depth: Axle 1: 20% 2: 30% 3: 80% 4: 80% * 1x Diesel Tank * 1x AdBlue Tank * 3rd + 4th Axles: Air Suspension * Duomatic * ABS + 15 Pin * Fixed Underrun Protection * Raised Exhaust Body: * Dautel Three-Sided Tipper * Bordmatik (tipping system) * L x W x H: 5.60m x 2.44m x 1m * Approx. 13m³ Cab / Cockpit: * Long-Haul * Sunroof * 2x Rotating Beacons * Automatic Climate Control * Radio / CB Radio / AUX / Bluetooth * 1x Bunk * Auxiliary Heater * Cruise Control * Hands-Free System Engine / Transmission: * 375 kW // 12,777 cm³ // Euro 6c * Automatic * Differential Lock * Air Suspension Axles Weights: * Gross Vehicle Weight 32,000 kg * Payload 17,290 kg * Unladen Weight 14,710 kg Other: * German Vehicle * TÜV / Inspection valid until 09/2026 * 1 Previous Owner New TÜV / Inspection and weight adjustments (increase or decrease) are possible upon request. _____ We don't leave you on your own after the purchase: We will help you obtain export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typographical errors as well as prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for various applications. With us, not only the vehicle counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. Be convinced! We look forward to your inquiry! _____ Bsdpfx Amezp Acderodh Our service for you: Vehicle Loading We will help you load your purchased vehicles. Special Transports We will support you in the organization of special transports. Export and Short-Term Registration Plates We will help you obtain export or short-term registration plates. Customs Formalities We will also support you with customs matters. Vehicle Transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1217, input voltage: 380 V, power: 34.8 kW (47.31 HP), input frequency: 50 Hz, We offer this ready for use Gubisch BS2000 planer and moulder, year of construction 1972. Serial number: 1217 Voltage: 380 V Frequency: 50 Hz Power consumption: 34.8 kW Working width: 200 mm Planing height: 120 mm Number of spindles: 6 Bottom spindles: 2 Right spindles: 2 Left spindles: 1 Top spindles: 1 Bdedpfx Amez Hac Hereh Spindle configuration: b-r-l-r-t-b Spindle rotation speed max: 6.000 rpm Spindle diameter: 40 mm Feedrate max: 30 m/min Continuously variable feed: Yes Feed motor: 2,2 kW Main motor power: 5,5 kW Chip rabbet cutter: No Seperate motor per spindle: Yes Motoric adjustment: Planing height Infeed table length: 3.500 mm Lubrication pump: manually First infeed roller controlled: Yes Type of feed roller drive: Cardanic Total connection: 23 kW If you have any questions or need more information, feel free to send us a message or give us a call.