Used Calzoni Hydraulic Motor for sale (33,954)

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Hsdpfxjua Iuls Ak Dsl Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet width: 3050 mm Sheet thickness: 10 mm Control: Elgo 87 P2 Blade strokes: 11 - 31 strokes/min Cutting angle adjustment: 1 - 4° Number of hold-downs: 16 pcs Pressure per hold-down: 900 kg Main motor power: 11 kW Table width: 700 mm Table height: 800 mm Dimensions (LxWxH): 4000 x 2220 x 1830 mm Weight: 6300 kg Accessories/Equipment: – digital length stop 10–1000 mm – upper and lower blade, two-piece, each 1550 mm – 1 set of spare blades Hedpfx Akjy H Inpj Dol – including low cart at the discharge side

Condition: good (used), functionality: fully functional, Year of construction: 2013, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 1-4 ° Backgauge – adjustable: 10 - 1000 mm Number of hold-downs: 13 pcs Distance from lower blade to hold-down: 25 mm Hold-down diameter: 60 mm Oil volume: 240 l Max. strokes: 24 per min. Total power requirement: 15 kW Hsdoy H Imrepfx Ak Djl Machine weight approx.: 6300 kg Space requirements approx.: 4100x3800x2000 mm Equipment: -Accessories: -Operating hours: 6,089 h -Angle gauge -3 material support arms -NC control Elgo -Automatic cutting angle adjustment -Electric backgauge 1000 mm -Foot pedal -Light curtain behind the machine -Cutting line illumination

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Hjdpfjy H Iddex Ak Djl Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table! Hsdpfx Aey H Icaok Dol

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Hsdpfx Aoy H Ibvok Dol Motor power: 3 kW

Condition: as good as new (ex-display), functionality: fully functional, power: 110 kW (149.56 HP), rotational speed (min.): 1,491 rpm, Siemens IE3 industrial electric motor, type 1LE15833AB034JC4-Z, rated at 110 kW at 50 Hz. Built in frame size 315M with IMB35 mounting (foot/flange), suitable for heavy-duty industrial applications such as pumps, fans, and compressors. The motor features IP55 protection and high efficiency. Suitable for both 50 Hz and 60 Hz operation. Hjdpfsy H H I Uex Ak Dol Manufacturer: Siemens Type: 1LE15833AB034JC4-Z Power: 110 kW (50 Hz) / 127 kW (60 Hz) Voltage: 400/690V (50 Hz) / 460V (60 Hz) Speed: approx. 1491 rpm (50 Hz) / 1790 rpm (60 Hz) Frame / Mounting: 315M / IMB35 (foot + flange) Protection: IP55 Efficiency class: IE3 (~95.5%) Weight: approx. 980 kg Bearings: 6319 C3 Origin: Czech Republic

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers -OLEO hydraulic buffer -Type: 21 - M FS - 100 -Stroke: 150 mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 hydraulic buffers available Price: per piece -Weight: 18 kg Hsdpfx Ajd Subuek Dol

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Hjdpey H D I Eofx Ak Djl Return to sender feature Scrap container Entry safety barrier

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate Hodpfxsy Hymqs Ak Dol • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: used, Year of construction: 2002, sheet thickness: 8sheet length: 2000prebending: 6Upper Roll Diameter: 205Side Roll: 185messurements (LxWxH): 3850 x 1550 x 1420 Description: Hodsy Hymwepfx Ak Djl Installation space: 480/150/150 cm, roller length – approx. 205/20 cm each, year of manufacture 2002.

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Hsdpfoyz Rv Esx Ak Dsl Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms - Foot switch - Light barrier

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Hedewz Et Sopfx Ak Dol Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Hsdpfx Aoyz Sw Rek Dsl Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Hsdpjyvh Dvefx Ak Djl Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Hedpfx Ajyz Rwiek Djl Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Hedpexu Nc Iefx Ak Dol Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Hsdpfxeyizxrs Ak Dol Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Hsdpfjvvkmbsx Ak Dol

Condition: good (used), electric motor, three-phase motor -Manufacturer: MEZ, Electric motor type AP132M-4 -Power: 7.5 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Bolt circle diameter: 265 mm -Recess Ø: 230 mm -Flange outer Ø: 300 mm -Design: B5 -Protection rating: IP44 -Dimensions: 520/360/H298 mm -Weight: 83 kg Hodjv Inhtopfx Ak Dsl

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hjdpfey E T A Ajx Ak Dsl Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg Hedpfx Akey E Twae Dsl

Condition: used, axle configuration: 3 axles, first registration: 11/2016, total length: 12,750 mm, total width: 2,540 mm, total height: 3,650 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 6,460 mm, color: red, Year of construction: 2016, Equipment: ABS, 1 x self-tracking axle / trailing steering axle. Hydraulic ramps. Loading bed: 860 cm Loading height: 90 cm Coupling height: 130 cm = Additional Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 2: Twin tyres; Tyre tread left inner: 35%; Tyre tread left outer: 35%; Tyre tread right inner: 35%; Tyre tread right outer: 35% Rear axle 3: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Hjdsy Igkropfx Ak Dol Weights Unladen weight: 9,190 kg Payload: 38,810 kg Gross vehicle weight: 48,000 kg Identification Model number: F-S43-1A1Y / HYDRAULIC RAMP = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po russki. We make every effort to provide correct information, but no rights may be derived from the listings.

Condition: used, mileage: 349,000 km, power: 130 kW (176.75 HP), first registration: 09/2007, fuel type: diesel, number of seats: 25, gearing type: mechanical, emission class: euro4, color: red, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, parking heater, soot filter, Equipment: Auxiliary air conditioning, refrigerator, coffee bar, individual lighting, jet outlets, ABS, ASR, retarder, CD, footrests, tables, microphone, air conditioning, auxiliary heating, radio, central locking, double side windows, power steering, electric mirrors, reclining seats, auxiliary heating Additional description: 2nd hand, very well-maintained interior, extensive interior fittings, serviced vehicle. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make errors and to sell the vehicle prior to sale! Hjdpfx Aksy Ifwqs Dol

Condition: excellent (used), mileage: 285,801 km, power: 460 kW (625.43 HP), first registration: 08/2019, fuel type: diesel, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,990 mm, total width: 2,540 mm, total height: 3,750 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, differential lock, electric window regulation, fog lights, fridge, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Differential lock - High beam headlights - Low noise emission - Enclosed cab - Speed limiter - Tipping hydraulics - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Sun visor - Toolbox - Power take-off (PTO) = Further Information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 7,871 kg Payload: 10,129 kg Gross vehicle weight: 18,000 kg Technical condition: very good Visual condition: very good Hodpfx Aksy Ifc Hj Del VOLVO FH 480 4x2 tractor unit with full equipment EURO 6L package, 480 HP Drive: 4x2 Wheelbase: 380 cm Globetrotter cab with full equipment: leather, air conditioning, navigation, refrigerator, 220V inverter Complete spoiler kit 1x large fuel tank Special interior features Hydraulic tipping body The tractor unit has an original 285,802 kilometers and is in top condition! We speak German Hablamos Español We SPEAK ENGLISH