Used Brookhaven Zeta Potential Analyzer for sale (437)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Gbedpfxoxxiiio Ad Iep Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Gjdpexxihfjfx Ad Isbp Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Gedpexxh Udefx Ad Iebp Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz Gbjdpfx Aeyc Idbjd Isp • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, Gbodpfx Aowhdnhjd Iep a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. Godpfx Adezhi Uqj Ijbp 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Year of construction: 2016, condition: excellent (used), Horiba Here we offer you a Horiba exhaust gas system, model Mexa 7100D. Including JAG-10-000-061 cylinder trolley, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems, modal analysis (dynamic or transient analysis) during non-stationary operating conditions. Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC 200 operating hours Weight: 620 kg Year of manufacture: 2016 Type: Mexa 7100D Condition: used Gbedpfx Adjzdy Rnj Isp Collection from our location Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a well-maintained Stäubli measuring robot. Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser distance sensor Model ILR 1181-30 Technical data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on reflector plate Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Gedpfx Aezdyt Asd Iobp Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be supplemented with additional plugins for specific tasks as well as customer-specific extensions. With the help of the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Large measuring range thanks to multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line tests: Haptic and optical tests Interchangeable test adapters for a wide range of devices Automatic testing, evaluation and marking including integrated leak test Vehicle seat tests: Functional and haptic tests Headrest distance measurements Comfort and stiffness evaluations Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language knowledge required Variable and dynamic test sequences Branched process control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical display of measurement data and report generation Flexible and extensible through plug-in architecture Stäubli robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Type: Stäubli Robot RX160 with controller CS8C, handheld device, software, PC Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. Gsdpezg Tanjfx Ad Iebp The plant minimizes production time with its unique location just in front of the screen.

Condition: used, Used focus parameter monitor for monitoring and analyzing laser processes in industrial production facilities. The system is used for process monitoring and quality control of laser optics and laser machining processes. Manufacturer: PRIMES Device type: Focus Parameter Monitor Model: FPM Condition: used Year of manufacture: 2018 Serial number: 16358 Gbsdpfx Adezdni Ee Iop Communication interface: PROFINET 2 x Ethernet port COM interface DCP interface Service access available Status display: Link Tx/Rx MAC address: 00:03:F4:0B:04:B0 IP address: 192.168.116.119 Robust industrial housing made of aluminum Integrated carrying handle For laser process monitoring and focus analysis Location: Kusel Quantity: 2 units available

Condition: good (used), Year of construction: 2017, functionality: fully functional, Dosing unit MOTAN Gravicolor 30 with GRAVInet Stock no.: 503694 Machine type/ Device type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 with GRAVInet Year of manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials with the highest recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications with throughput rates of up to 2200 kg/h. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and achieves the best possible operating point at all times through self-optimization. The highest level of recipe adherence results in the best and most consistent product quality. Gbjdpfx Ajzdi Ngjd Ijp

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use Gbedpfxoyk Evqj Ad Iep The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Key Features Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques Gbodpewnb D Tsfx Ad Ijp System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Condition: used, functionality: fully functional, ISC Recycle offers you a used, high-performance, and carefully selected refrigerated compressed air dryer to guarantee clean and dry air in your industrial networks. Model: PARTENAIR EVO-BLUE-145 Condition: Used Dew point: +3°C under pressure (ISO 8573-1: 2001 Class = 4) Gsdpfx Aszgtdged Iebp Technology: Proportional power regulation for perfect dew point stability Refrigerant: Environmentally friendly refrigerant with low global warming potential (GWP) Performance: Extremely low pressure drop, guaranteeing optimal energy savings Do not hesitate to contact us for more information.

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – fully working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Gbsdpfxezgcifo Ad Iop Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Gjdpfoygwayjx Ad Ijbp Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 24006414, • Ultimate on-site metal testing capability with 46 elements in 16 metal matrices in 2 seconds for most elements, 7 seconds for light elements (e.g., Al, Si, Mg); on-site calibration for elements and applications not covered by factory methods. • Designed for all-day single-hand use: Balanced, size-optimized, comfortable, easy-to-read display; quick-action software: powered by Android, designed for touch operation, quick access to all functions. • Data & documentation everywhere: GPS for location, cameras for visual records, WiFi, Bluetooth, USB, and microSD for documenting and transmitting results. Lab-on-the-go: from handheld to a mini-lab system when connected to the docking station with a sample chamber. The all-new SPECTRO xSORT model XHH04 is packed with a host of new features and designs to maximize user speed, ease, and convenience – along with advanced analytical performance. Gedpfxozgbwbj Ad Isbp This innovative handheld XRF gun analyzer quickly handles just about every on-site metal testing need imaginable, from the scrapyard or factory to the foundry floor. Powerful, flexible SPECTRO xSORT XHH04 provides outstanding coverage across the spectrum for all common types of metals and alloys – including 46 elements in 16 metal matrices. All without requiring operator decisions. And if an uncommon element or application is not factory-installed, the SPECTRO xSORT XHH04 handheld analyzer provides experienced users with a smart on-site calibration option on the PC. The SPECTRO xSORT XHH04 delivers high-throughput, highly reliable elemental testing and spectrochemical analysis of countless metals and their alloys under widely varying conditions. FAST Entry-level SPECTRO xSORT Alloy delivers metal grade identification in a few seconds. The even more powerful standard SPECTRO xSORT analyzes most alloys in only 2 seconds! Even alloys with light elements (aluminum, magnesium, silicon, phosphorus, sulfur, etc.) can be identified in 7 seconds. As a result, plant personnel or contractors can complete hundreds of inspections per shift – boosting productivity and profitability. EASY Reduced in size and better balanced than previous models, SPECTRO xSORT is optimized for day-long, fatigue-free, one-handed operation. The ergonomic design includes a light-squeeze trigger, a 5” large, easy-to-read, wide-angle, high-definition display, extra physical buttons ideal for gloved hands – and a smaller probe head for access to tight spaces. Results: effortless operation with all-day comfort. FLEXIBLE Factory methods offer maximum analytical flexibility, with 2 collimator spot sizes (3 mm and 5 mm). Users get ultra-wide coverage of elements and alloys, plus sample sizes. And operators don’t have to switch methods between samples.

Condition: used, mileage: 39,600 km, power: 235 kW (319.51 HP), first registration: 01/2013, fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mercedes Actros 2532 6x2 garbage truck * Euro 5 emission standard * Automatic transmission * Right-hand drive * Leaf spring, air suspension * Air conditioning * EFH (likely an abbreviation – further context needed for precise translation, potentially related to a specific body or equipment feature) Gbedpfx Ajzf Ugaed Iop

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Gjdpfx Aorci U Hsd Ijbp Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Peeling diameter: 35 - 100 mm of unsorted onions

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Gbodpfx Aovxz Aljd Isp Capsule Distribution and Application Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm Gbodpfoyyz Ebox Ad Iep - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Gedpszffzuefx Ad Isbp Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Gsdpfx Aevwflnod Ijbp

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Gbedpezbybiofx Ad Iop Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 240 mm, pipe length (max.): 6,000 mm, cutting speed: 10,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 260 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 3,150 kg, total length: 9,530 mm, total width: 1,950 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF6024T Tube Laser Cutting Machine – 1.5–6kW Fiber Laser Tube Cutter, TÜV-CE Certified The SENFENG SF6024T is a versatile and efficient tube laser cutting machine for the precise processing of round tubes, square tubes, rectangular tubes, and various profiles. With laser power ranging from 1.5kW to 6kW, it is suitable for metal fabrication companies, tube processors, furniture manufacturers, fitness equipment production, construction machinery, vehicle frames, shelving systems, and general industrial manufacturing. The SF6024T is equipped with follow-up support, a pneumatic self-centering chuck, and a professional CNC system for tube processing. It offers stable cutting performance, strong dynamics, and reliable accuracy in daily operation. Key Technical Data: • Model: SENFENG SF6024T • Laser Power: 1.5–6kW • Tube Length Range: 2000–6500 mm • Round Tube Range: Φ20–Φ240 mm • Square Tube Range: □20–□240 mm • X/Y Positioning Accuracy: ±0.05 mm • X/Y Repeatability: ±0.03 mm • Maximum Rapid Traverse Speed: 100 m/min • Maximum Chuck Speed: 100 r/min • Maximum Acceleration: 1.0G • Maximum Tube Load: 260 kg • Tube Weight: ≤43 kg/m • Machine Weight: approx. 3150 kg • Machine Dimensions: approx. 9530 × 1950 × 2200 mm • Power Supply: 3-phase, 380V / 50Hz Gbsdpfjzd Enxex Ad Iep • Protection Class Main Power Supply: IP54 • TÜV-CE Certified Processable Tubes and Profiles: • Round Tubes • Square Tubes • Rectangular Tubes • Oval Tubes (upon request) • I-Beams • U-Profiles / Channel Steel • H-Beams • Isosceles Angle Steel • Unequal Angle Steel The pneumatic self-centering chuck enables quick and efficient clamping. The lightweight, low-inertia design supports high rotational speeds, reduces energy consumption, and lowers operating costs. The integrated chuck cover protects against dust and cutting debris, increasing reliability in continuous operation. The follow-up support system supports long tubes during processing, reducing accuracy losses due to bending. The machine bed consists of welded rectangular tubes and is stress-relieved and precisely machined. This achieves high stiffness, low vibration, and a long service life. The FSCUT 3000DE-G CNC system was specially developed for tube laser cutting. It supports real-time compensation of the tube center deviation, automatic loading and unloading, follow-up support function, a tube process library, TubePro cutting software, and professional TubesT nesting software. Optional Automation: • Semi-automatic Loading System • Simplified Fully Automatic Loading System • Fully Automatic Loading System • Standard Unloading System 2 m • Optional Unloading System 3 m / 4 m SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to provide fast service support and minimize potential downtime. Other available TÜV-CE certified SENFENG tube laser models: SF6020T, SF6024T, SF6035T, SF6038T, SF9020T, SF6020NT, SF6038NT, SF9032NT, SF9035NT, SF9038NT, and SF12038NT.