Used Brian James Trailers Working Platform for sale (63,369)

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: Itedpfx Akoy Auhzexjf * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 38,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Itodpfx Aey Augdekxof Selection of features. Complete equipment details upon request. EQUIPMENT: * Gooseneck, length approx. 4,100 mm, with central beam * Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length * Technical fifth wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS Tire Pressure Monitoring System in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit) * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - The first three pairs are flat (LC 10,000 daN) - The rear pair is fold-out (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg * Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform * 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area * One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the load area, right side when facing forward * 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward * Rear crossmember with bevel approx. 350 mm x 10° * Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember * 1 pair of drop-down supports at the rear crossmember * Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit) * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail * Locking positions at each 500 mm on the extension * Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead * 4 wheel chocks with holder under the load bed * Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks) * 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit * 2 axle load gauges mounted on the left side, including axle load diagram * 1st axle with traction aid * Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,000 h, machine/vehicle number: VWASXTF24H7202473/73, Aerial platform on truck. Nissan NT400 / CTE aerial platform Iedpfx Aey At Tiskxstf Working height 20 m

Condition: used, mileage: 108,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro1, Year of construction: 2000, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 FIN: K517249 Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) * Protective grille above cabin * 2 x rotating beacons Iedpfot Rckwox Akxstf Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, mileage: 108,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, emission class: euro1, number of seats: 2, Year of construction: 2000, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 FIN: K517249 Itjdpfx Akot Rck Rsxjf Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) * Protective grille above cabin * 2 x rotating beacons Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, mileage: 84,553 km, power: 90 kW (122.37 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,740 mm, total width: 2,220 mm, total height: 2,915 mm, Equipment: ABS, crane, soot filter, Renault 120 DXI Palfinger Steiger P260B 4x2 Self-propelled work platform Itedpfx Ajy Aqf Nskxof Suspension: leaf spring Wheelbase: 3.90 m PALFINGER Type: P260B Year: 2013 4x hydraulic extension 4x hydraulic outriggers 2x work baskets + emergency controls Equipment: - 3 seats - Radio-CD-DVD-AV-USB - Electric windows We are happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2019, total length: 9,220 mm, total width: 2,480 mm, total height: 1,080 mm, suspension: air, tire size: 445/45-R19.5, wheelbase: 5,170 mm, Year of construction: 2019, = Additional options and accessories = - 20FT connections = Notes = Attractive 2019 KRONE AZ18 MAXI 2-axle trailer (year of manufacture 2019) with ABS/EBS, BPW axles with disc brakes, 2 lift and lowering valves, height 105 cm, tires 445/45-R19.5 (left profile: 8/9 mm; right profile: 8/8 mm), unladen weight: 2,820 kg, permissible total weight: 18,000 kg, Dutch registration, 4 units available = Further information = Axle configuration Tire size: 445/45-R19.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Front axle 1: Max. axle load: 9,000 kg; Steered; Tire treads left: 50%; Tire treads right: 55% Front axle 2: Max. axle load: 9,000 kg; Tire treads left: 50%; Tire treads right: 50% Weights Unladen weight: 2,820 kg Payload: 15,180 kg Gross vehicle weight: 18,000 kg Functional Body manufacturer: KRONE AZ Condition Technical condition: very good Visual condition: very good Identification Registration: 33-WT-PR Iodpfey Anxtex Akxjtf Further information Contact Arne Honingh for more information.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 04 18750, load capacity: 200 kg, overall weight: 1,400 kg, empty load weight: 1,400 kg, For sale is a reliable Nifty 120 T trailer-mounted boom lift from the year 2008, in good, well-maintained condition. Ideal for working at height such as tree trimming, roof work, façade cleaning, or installations. Technical specifications: - Working height: approx. 12.2 m - Lateral outreach: approx. 6.1 m - Year of manufacture: 2008 - Power source: Battery + 230V mains (hybrid) - Own weight: approx. 1,400 kg - Platform capacity: approx. 200 kg Itsdpoy Amfxofx Akxjf Condition & Features: - Fully functional and ready for immediate use - Simple controls from both basket and ground - Hydraulic outriggers ensure stable support - Compact design – ideal for confined work sites - Normal signs of use consistent with age Advantages: - Flexible operation thanks to hybrid drive (indoors & outdoors) - No additional generator required - Easy to transport (suitable for cars with appropriate towing capacity) Price: €12,500 gross (Export: €10,504.20 net) Viewing and test run available by appointment. If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2024, color: white, - Mr. Rudolph will be happy to assist you by phone at: Multitel MTE 270, Working height: 26.7m, Outreach with outriggers within frame: 5.4m, Maximum lateral outreach: 11.2m, Basket load capacity: 250kg, Unladen weight: 3,350kg _____ Ijdpfoy Ahf Tex Akxotf Radio, electric windows, rear window, without air conditioning, height-adjustable driver's seat, and much more. We are happy to make you an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale excepted! Mr. Rudolph will be happy to assist you by phone at: For further information, please visit our homepage: ... power steering, ABS, ESP, particulate filter = Further information = Mileage: 50 km Unladen weight: 3,500 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,550 mm, total length: 13,600 mm, total width: 2,540 mm, total height: 1,550 mm, suspension: air, tire size: 275 / 70 R22.5 – Good Year, color: red, Year of construction: 2024, Color: Red Payload Capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Model: F-S44-1BBY Triple Extendable Flat Bed Chassis Number: YAFSR4009S0036724 Year: NEW / Unused Weights / Payload Kingpin Load: 28,000 kg Axle Load: 12,000 kg per axle Total Axle Load: 48,000 kg Gross Vehicle Weight (GVW): 76,000 kg Unladen Weight: 15,200 kg Payload Capacity: 60,800 kg Axles Axle Brand: BPW Air Suspension All Axles with Hydraulic Steering WABCO Braking System with EBS Tyres: 275 / 70 R22.5 – Goodyear Load Index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200 mm + 7,400 mm + 7,600 mm Max. Extended Length: 35,800 mm Loading Platform Width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High Resistance Metalized Steel Construction NATO Plug Lashing Rings Iedpfx Akev I Dqqsxotf Stake Pockets Wooden Loading Floor Mechanical Landing Gear Electrohydraulic Pump for Trailer Functions Spare Wheel Rear Bumper with Lighting Kingpin 2.0” and 3.5” Central Greasing System with 2 BEKAMAX Pumps = Additional Information = General Information Year of Manufacture: 2024 Axle Configuration Tyre Size: 275 / 70 R22.5 – Goodyear Axle Brand: BPW Suspension: Air Suspension Rear Axle 1: Twin Tyres; Max. Axle Load: 12,000 kg; Steered; Tyre Tread (left inner/outer, right inner/outer): 100% each Rear Axle 2: Twin Tyres; Max. Axle Load: 12,000 kg; Steered; Tyre Tread (left inner/outer, right inner/outer): 100% each Rear Axle 3: Twin Tyres; Max. Axle Load: 12,000 kg; Steered; Tyre Tread (left inner/outer, right inner/outer): 100% each Rear Axle 4: Twin Tyres; Max. Axle Load: 12,000 kg; Steered; Tyre Tread (left inner/outer, right inner/outer): 100% each Weights Unladen Weight: 15,200 kg Payload: 60,800 kg GVW: 76,000 kg Functionality Loading Platform Height: 155 cm Extendable Body: Yes Condition Technical Condition: Very Good Optical Condition: Very Good Further Information Please contact Stefan Schaapveld for more information.

Condition: used, mileage: 309,880 km, power: 330 kW (448.67 HP), axle configuration: 6x2, color: yellow, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2019, Equipment: ABS, EBS, air conditioning, - Brake system For vehicle inquiries, Mr. Seidel will assist you (by phone). Iedpfxsy Adbqo Akxstf Mercedes-Benz Arocs 2545 L 6x2 Construction Material Truck Bodywork: HMF 2110 L4 crane, pallet tongs, elevated operator seat Axle, narrow wheel track, front axle 8.0 t, front axle, straight design, rear axle, ring gear 440, hypoid, 13.0 t, trailing axle, 8 t, steered, liftable, axle ratio i = 2.733, electronic braking system with ABS and ASR, electronic compressed air supply unit, medium, heating, electronic compressed air supply unit, disc brakes on FA and RA, disc brakes with partial protection, parking brake additionally on front axle, secondary water retarder, condensate monitoring for compressed air system, compressed air tank, steel, trailer brake, 2-line, brake connections left, wheelbase 4800 mm, rear overhang 2550 mm, mounting parts for platform body, steering, single-circuit, power steering pump, non-regulated, stabilizer, front axle, extra stabilizer, rear/trailing axle, rear underrun protection (ECE), front underrun protection (ECE), aluminum, battery carrier, batteries side-by-side, rear axle mudguard, vehicle width 2550 mm, 3-piece mudguard with EU spray protection, spray protection (EU), front, compressed air connection in cab, driver’s air-suspended comfort seat, co-driver’s functional seat, seatback release, driver’s seat, lower comfort bunk, seat covers velour, curtain across bed(s), air conditioning, residual heat utilization, auxiliary hot water heater, cab, storage compartment covers, driver and passenger side, drawers under bunk, stowage flaps above windscreen, roof hatch/vent, battery sensor (Hella), batteries 2 x 12 V/220 Ah, low maintenance, generator 28 V/100 A, socket 24 V/15 A, passenger footwell, PSM, body and trailer CAN, ISO 11992, PSM, body CAN, ISO 11898 instead of 11992, additional functions for body builders, hill start assist, speed limiter 30 km/h, night driving light switch, trailer socket 24 V, 15-pin, remote control for air suspension, pre-installation for electrical devices, side module, N3 vehicle, mirror trim, construction vehicle, L-cab ClassicSpace, 2.30 m, tunnel 170 mm, floor variant, tunnel 170 mm for left storage compartment, cab width 2.30 m, cab 600 mm mounting height, cab suspension comfort steel sprung, cab tilting device mechanical-hydraulic, cab side wall closed right, cab rear wall without window, external storage compartment flap left, external sun visor transparent, A-pillar trim, tinted windshield, heated front mirror, air horn, bumper, steel corners, bumper center part towing eyes, coupling jaw, locking system with central locking, comfort locking system, gearbox G 281-12/14.93-1.0, twin plate clutch, Mercedes PowerShift 3, air suspension rear axle, combination instrument 10.4 cm, digital tachograph (EU) with additional recording function, tachograph manufacturer VDO, CD radio, Bluetooth, 2-way speaker system, CB radio prep 12 V DIN slot, prep for toll detection, parking brake additionally on front axle, main tank left, tank 390 l left, 650 x 565 x 1250 mm, aluminum, AdBlue tank 60 l left, lockable tanks, protection cap for AdBlue dosing system, fog lights halogen, lower shell to prevent dust turbulence, engine OM471, R6, 12.8 l, 330 kW (449 hp), 2,200 Nm, 2nd generation OM471, high-performance engine brake, 2-cylinder air compressor, insect guard in front...

Condition: used, mileage: 495,662 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, suspension: air, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (by phone). Mercedes-Benz Actros 2543 L 6x2 Flatbed with Rear Crane Body: Palfinger PK 18002 EH Axle: Narrow wheel mounting track, Front axle 7.5 t, front axle, cranked design; Rear axle with 440 crown wheel, hypoid, 13.0 t, active lubrication, controlled; trailing axle 7.5 t, steered, unloadable, liftable; axle ratio i = 2.611. Electronic braking system with ABS and ASR, electronic air supply unit (medium), heating, disc brakes on front and rear axle, condensation monitoring for compressed air system, trailer brake (2-line). Wheelbase: 5,200 mm; rear overhang: 2,250 mm. Steering: single-circuit, non-regulated steering pump; stabilizer front axle, additional stabilizer rear/trailing axle. Rear underrun protection (ECE), front underrun protection (ECE, aluminum), rear axle mudguard, 2,550 mm vehicle width, 3-part mudguards with EC splash protection front and rear, aerodynamic underbody paneling. Interior: Smoker’s package, compressed air connection in cab, driver’s air-suspension seat (comfort), co-driver functional seat, seat backrest release, comfort bed top (wide, adjustable), comfort bed bottom with PremiumComfort mattress, velour seat covers, curtain across bed(s), driver’s side sunblind, electric auxiliary air conditioning, automatic climate control, residual heat utilization, additional hot water heater for cab, enhanced insulation, drawers under bed, overhead compartments above windshield, electric roof hatch. 2x 12V/220Ah low-maintenance batteries, regulated generator 24-30V/100A, circuit breakers, voltage converter 24V/12V 10A, 12V/15A connection point for additional consumers, 24V/15A socket passenger side footwell. PSM, Superstructure CAN, ISO 11898 instead of 11992, hill start assist, speed limiter 30 km/h, night driving light switch, 24V 15-pin trailer socket, remote control for air suspension, mirror trim, road vehicle, L-cab StreamSpace (2.50 m), flat floor, cab width 2.50 m, cab mounting height 765 mm, comfort cab suspension with steel springs, manual-hydraulic cab tilt device, left exterior storage compartment/lid, transparent external sun visor, A-pillar cover, tinted windshield with sunband, heated front mirror, air horn, plastic corner bumper, central bumper with towing eyes, door extension, left/right cab entry fixed, central locking system, comfort lock system. Transmission: G 211-12/14.93-1.0, Mercedes PowerShift 3, air suspension rear axle, instrument cluster 12.7 cm with additional displays, digital tachograph with extra recording function (VDO), Multimedia Radio Touch, 2-way speaker system, Truck Data Center 6 (DTCO), CB radio pre-installation (12V, DIN slot), toll pre-equipment, Truck Data Center 6 (DTCO) pre-equipment. Tanks: Main tank left, 630 l (aluminum, 650 x 700 x 1600 mm), AdBlue tank 60 l left, lockable tanks. Lighting: fog lamps, LED daytime running lights, LED taillights, work lights rear cab. Itodpjy Adbksfx Akxof Engine: OM470, inline 6, 10.7 l, 315 kW (428 hp), 2,100 Nm; Euro VI OBD-C engine version, high-performance engine brake, two-stage fuel-optimized air compressor, radiator louver, regulated water pump, angled air intake integrated into cab, ...

Condition: used, mileage: 400 km, power: 387 kW (526.17 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Brake system Ijdpfxey Adbdo Akxjtf For vehicle inquiries, Mr. Seidel will assist you by phone (number provided upon request). Iveco X-Way 530 6x2 Building Material Flatbed with Rear-mounted Crane Crane: Palfinger PK 20.501L TEC, high seat, dual stabilizer legs, load diagram: see photos. Flatbed: Internal dimensions approx. 6600x2480x1000 mm. Axle configuration: 3 axles, trailing axle, driver's cab version Active Space, high-volume cab; Engine: Cursor 13, 530 HP, Euro VIe; Transmission: 12-speed HiTroniX, automated; Permissible gross weight: 26t; Drive axle with single reduction, single axle, air suspension on rear axle, disc brakes, steered trailing axle, single tires, mixed operation suitable for both on-road and light off-road use; Vehicle set-up ON; Wheelbase: 4,800 mm; Engine speed: 1900 rpm; Steel rims; standard reverse gears; tires DRIVE T. 315/80R22.5; Speed limiter: 90 km/h; Electric roof lift, transparent with high roof MLL; Front headlights: halogen; black decorative foil on doors; AS driver cab with high roof; air suspension for cab; front underrun protection for chassis above 7,490kg gross weight; first-aid kit; hybrid bumper; non-heated windshield; electrically adjustable and heated exterior mirrors; standard cab roof insulation; electronic immobilizer and second vehicle key; digital EU tachograph 4.1; static passenger seat; air suspension on rear axle; Hi-TroniX 12TX 2420 TD; 2 wheel chocks; batteries mounted horizontally on frame; standard air tank plates; generator 2160 watts (24 volts x 90 amps); recommended for tail lift operation; rear shock absorber, temperate climate version, standard design; 2-cylinder air compressor, 630 ccm; chassis frame in gray; APU pressure release to atmosphere; standard overall brake system for towing operation; steel air tanks (number varies according to suspension and trailer configuration); standard applications; exhaust end pipe left; emission standard EURO VI E; lift device for trailing or leading axle (TX/P); trailer version suitable for full-trailer operation with continuous brake system; rear cross-member, D-value: 130 kN; 24-volt, 15-pin trailer socket; heated diesel pre-filter with separator; standard gearbox mode; optimized aerodynamics at A-pillar; ECO switch for toggling between Power and Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission settings; 4 DIN storage compartments above; VDI interface (Vehicle Data Interface) for telematics services (FMS) version 4.0; gearbox software ECO-Roll (freewheeling function); driving style analysis (DSE); adaptive cruise control (ACC); lane departure warning system (LDWS); warning triangle, version and dimensions per ECE-27 directive; hill hold assist for comfortable starting on inclines; warning beacon; electronic stability program (ESP); emergency braking assistant (AEBS); PTO NTX/10c, bottom mounted pump; rocking mode; storage compartments left and right; fog lights incl. cornering/turning lights; electrically tiltable cab; external transparent sun visor on cab roof; bed with curtains, lower bed one-piece (firm feel); upper bed with continuous mattress; reinforced parabolic spring on front axle; axle weight variant: front axle 8,000 kg / rear axle 11,500...

Condition: used, axle configuration: 2 axles, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Air suspension rear - Air suspension front = Notes = For inquiries about the vehicle, Mr. Seidel will assist you (by phone). Fliegl TPS 119 Flatbed Air suspension, 40 mm towing eye, Duomatic coupling, GFA axles, Knorr ABS, spring-loaded brakes, drive-on ramps, permissible gross weight: 11,900 kg, unladen weight: 3,250 kg, payload: 8,650 kg, cargo area dimensions: L 6,200 mm W 2,490 mm H 380 mm, tire tread depth: 1st axle 10 mm, 2nd axle 10 mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our homepage. Itodpfsy Ada Tsx Akxof ... Subject to errors, changes, and prior sale !!! - = Further information = Unladen weight: 3,250 kg Payload: 8,650 kg Gross vehicle weight: 11,900 kg Cargo area dimensions (LxWxH): 6200x2490x380 Last inspection: 2026-07 Please contact Tobias Ebert for further information.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 15,570 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,570 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: hydraulics, tire size: 295/80 R22.5, wheelbase: 1,650 mm, color: red, Year of construction: 2009, Colour: Red Payload weight: 85,240 kg Main Features Iedpfxsuu Hgwo Akxstf Manufacturer: Nooteboom Type: 0VB-102-06 Ballast Trailer Chassis number: XMR0VB00090001126 Year of manufacture: 2009 Weights/Load Capacity Axle load: 12,000 kg per axle Total axle load: 12,000 kg x 6 = 72,000 kg Gooseneck load: 30,000 kg Gross vehicle weight (GVW): 102,000 kg Unladen weight: 16,760 kg Payload: 85,240 kg Axles Axle brand: SAF Hydraulic suspension 1st axle: friction steered + liftable 2nd axle: rigid 3rd to 6th axle: hydraulically steered Tyres: 295/80 R22.5, twin tires Dimensions Total length: 15,570 mm Loading floor width: 2,520 mm Unladen height: 1,670 mm Loaded height: 1,605 mm King-pin height: 1,345 mm Rear overhang: 2,750 mm Front overhang: 1,560 mm Additional Information NATO plug Hydraulic landing gear Manual steering control Spare wheel Lashing rings Stake pockets Rear bumper with lighting 3.5-inch king pin Frame-integrated steps Central lubrication = Further Information = General Information Year of manufacture: 2009 Axle configuration Tyre size: 295/80 R22.5 Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: twin tires; lift axle; max. axle load: 12,000 kg; steered Rear axle 2: twin tires; lift axle; max. axle load: 12,000 kg Rear axle 3: twin tires; max. axle load: 12,000 kg; steered Rear axle 4: twin tires; max. axle load: 12,000 kg; steered Rear axle 5: twin tires; max. axle load: 12,000 kg; steered Rear axle 6: twin tires; max. axle load: 12,000 kg; steered Weights Unladen weight: 16,960 kg Payload: 85,040 kg Gross vehicle weight: 102,000 kg Functional Loading platform height: 167 cm Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: on request Additional Information Please contact Stefan Schaapveld for further details.

Condition: new, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details ? Loading area length: 13,620 mm ? Loading area width: 2,480 mm ? Fifth wheel height: 980 mm ? Multilock outer frame, universal load securing option every 100 mm _____ Axles/Tires ? BPW axles ? Air suspension ? Wheelbase: 1,310 mm ? Brake discs (370 mm diameter) ? Wheel nuts with protective caps ? 1st axle as lift axle ? Tire monitoring system ? Odometer _____ Attachments ? Toolbox ? 10 pairs of 81 x 81 mm stake pockets in the outer frame ? 15 pairs of Multi-Lash lashing rings ? 10 stake pockets, 81 x 81 mm, centered in the floor ? 12 insert stakes, total length approx. 1,950 mm ? 12 pillars, total length approx. 1,950 mm ? 30 mm thick, waterproof floor panel _____ Accessories ? 2 overhead marker signs including marker light ? Pillar storage on the left side for 12 pillars _____ Lighting ? Multifunctional taillights (Hella) Iodpfx Aon Hrtkjkxotf ? 2 LED license plate lights ? LED side marker lights with flashing lights ? Rotating beacon (orange) ? Including 1 reversing light _____ Paintwork ? Chassis: RAL 9005 - jet black ? Rims: natural silver ? Landing gear: RAL 9005 - jet black ? Axles: RAL 9005 - jet black ? Bulkhead: RAL 7035 - light gray

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 03/2007, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, total length: 13,230 mm, total width: 2,520 mm, total height: 2,600 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,970 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Equipment = - BPW axles Iedpfoxuu Aajx Akxetf - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication system = Remarks = Attractive 2007 NOOTEBOOM OVB-73-04, 4-axle ballast trailer. Axles 2, 3, and 4 are hydraulically steered (incl. wired remote control), BPW axles with drum brakes, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication, 3" kingpin, air suspension. Unladen weight: 11,620 kg, gross vehicle weight: 71,400 kg. Twin tires with 275/70 -R22.5 tyres (L: 10/13, 13/13, 14/14, 7/7 mm; R: 10/7, 14/14, 13/12, 11/12 mm), Belgian registration with valid technical inspection until 25.03.2026. = Additional Information = Axle configuration Tyre size: 275/70-R22.5 Axle make: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 11,600 kg; Tyre tread depth left inside: 65%; left outside: 80%; right inside: 65%; right outside: 45% Rear axle 2: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 80%; left outside: 80%; right inside: 90%; right outside: 90% Rear axle 3: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 90%; left outside: 90%; right inside: 75%; right outside: 80% Rear axle 4: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 45%; left outside: 45%; right inside: 70%; right outside: 75% Weights Unladen weight: 11,620 kg Payload: 59,780 kg Gross vehicle weight: 71,400 kg Condition Technical condition: very good Visual condition: average Further information Please contact Arne Honingh for more details.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2424288, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2018 Itedpfoyz Rw Ajx Akxjf Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with distributed load: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Maximum climbing ability: 25% Fully functional General used condition Optional delivery possible Optional rental possible

Condition: used, mileage: 33,283 km, first registration: 10/2015, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2015, Nissan Cabstar 32.12 NT400 with Time ETL30 Aerial Work Platform 11.6 meters! ---- * Manufacturer: Nissan * Model: Cabstar NT400 32.12 * First registration: 10 / 2015 * Recorded mileage: approx. 33,283 KM * Diesel * French registration Superstructure: * Manufacturer: Time * Model: ETL 30 * Working height: approx. 11.6 meters * Platform height: approx. 9.6 meters * Recorded operating hours: approx. 2,590 * Good condition! * Video and further photos available on request (WhatsApp Erik) * Price: 15,900 euros, net + 19% VAT ---- For further questions, please call: Isdjyz Hihopfx Akxstf Erik Kortum: WhatsApp All information without guarantee or warranty. Subject to errors and prior sale.

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Iedpfxoyz E T So Akxjtf Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: used, Year of construction: 2012, operating hours: 3,892 h, Equipment: all wheel drive, Used vehicle Ijdex E Iwhspfx Akxstf Vehicle no. 3246, Genie S-40 boom lift, year of manufacture: 2012, operating hours: 3,892, DEUTZ 3-cylinder diesel engine with 36.3 kW, unladen weight: 5,352 kg, max. working height: 14.2 m, max. platform height: 12.2 m, max. horizontal outreach: 9.7 m, wheelbase: 2,200 mm, turntable rotation: 360°, platform dimensions (LxW): 1.2 m x 0.76 m, automatic horizontal leveling, platform rotation: 160°, all-wheel drive, 76-litre fuel tank. For enquiries, please quote ... Subject to errors and prior sale.

Condition: used, Year of construction: 2010, operating hours: 4,900 h, Equipment: all wheel drive, Used vehicle Ijdpfx Akex E Iwnexotf Vehicle number: 3247, Genie Z-51/30J aerial work platform, year of manufacture: 2010, operating hours: 4,900, DEUTZ 3-cylinder diesel engine with 36.3 kW, max. working height: 17.62 m, max. platform height: 15.62 m, max. horizontal outreach: 9.25 m, wheelbase: 2,030 mm, turntable rotation: 359°, platform dimensions (L x W): 1.8 m x 0.76 m, automatic horizontal leveling, platform rotation: 160°, all-wheel drive, tire size 355/55 D625, foam-filled, 64.3-liter fuel tank. Inquiries welcome, subject to errors and prior sale.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, 1. Technical Data * Maximum permissible fifth wheel load: 12,000 kg * Maximum permissible axle load: 24,000 kg * Gross vehicle weight rating: 36,000 kg (technically up to 39,000 kg) * Technical details for registration and manufacturer’s plate included. 2. Chassis and Body * Welded ladder-type frame in modular construction * Multi Lock outer frame for flexible load securing * Load compartment length: 13,620 mm, load compartment width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard device in compliance with EU directive * Rear access ladder * Two mechanical landing gears, operated from one side 4. Axles and Running Gear * 3 axles, each with a 9,000 kg load capacity * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lifting and lowering system with automatic lift axle control * 1st axle configured as a lift axle 5. Wheels/Tyres * 6 units, 385/65 R 22.5, M+S tread (Mud & Snow) * Smart Tyre Monitoring and TPMS (telematics services available) * Wheel nuts with protective caps 6. Brakes & Electrical System * Braking system compliant with ECE Regulation 13 including ABS and EBS * Spring-actuated parking brake * Full LED lighting, side marker lights with indicator function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof and sealed hardwood floor * Rear portal through-loading height: 2,700 mm * Steel front wall with impact protection plate 8. Tarp & Side Walls * PVC tarpaulin, sliding cover, reinforced and with tensioning system * Roof tarpaulin white, side and rear contour markings 9. Other Equipment * Toolbox, pallet stop, warning panels, beverage transport certificate * Telematics Premium 24 months included 10. Paintwork & Appearance * Chassis deep black RAL 9005 * Wheel rims in natural silver * Side underrun protection in white 11. Certificates Itodpfxjyz Et Ss Akxsf * Load securing certificates according to EN 12642 XL and VDI 2700 Part 12 * EU Certificate of Conformity and Registration Certificate Part II

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2005, loading space length: 13,600 mm, loading space width: 2,500 mm, Equipment: ABS, Schmitz Cargobull S01 Plattform with Lift Axle, SAF Axles Ref. No. for inquiries: 1225957 Itsdpfx Akoyz Envexof * ABS * EBS * 3 axles with air suspension * Lift axle * Disc brakes * SAF axles Cargo compartment dimensions: Length: 13,600 mm Width: 2,490 mm Tyres: 1st axle: 455 / 40 R 22.5, 30% tread, air-suspended / lift axle 2nd axle: 455 / 40 R 22.5, 30% tread, air-suspended 3rd axle: 455 / 40 R 22.5, 30% tread, air-suspended ----Price: €2,900 + 19% VAT For further questions, you can reach us at the following numbers: * We speak: German, English, French, Polish, and ????? Subject to errors, mistakes, and prior sale.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 05/2022, loading space length: 19,190 mm, loading space width: 2,550 mm, total length: 179,900 mm, total width: 2,550 mm, suspension: air, tire size: 245/70-R17.5, color: other, Year of construction: 2022, Equipment: ABS, = Further options and equipment = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes - Central lubrication = Remarks = Attractive 2022 KASSBOHRER LOWBED LB3E extendable low loader with ABS/EBS, single extension (600 cm), hydraulic ramps (265x85 + 140x85 cm), BPW Eco-Plus axles with drum brakes, 1st axle = lift axle, 3rd axle = steering axle (trailing axle), hardwood floor (floor height: 89 cm) with extensions (left & right: semi-trailer can be widened up to 3150 mm), heavy-duty lashing rings in side members (left & right), heavy-duty lashing points in the floor (left & right), rear support legs, 4x width markers, tyres: 245/70-R17.5 (tread left: 6/7, 6/12, 9/4 mm; tread right: 8/4, 5/8, 6/7 mm), unladen weight: 13,060 kg, gross vehicle weight: 48,000 kg, Belgian registration with valid technical inspection until 24/05/2026. = Further information = Axle configuration Tyre size: 245/70-R17.5 Axle manufacturer: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tyres; lift axle; max. axle load: 10,000 kg; Tyre tread left inner: 45%; left outer: 40%; right inner: 25%; right outer: 50% Rear axle 2: twin tyres; max. axle load: 10,000 kg; Tyre tread left inner: 75%; left outer: 40%; right inner: 50%; right outer: 35% Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; Tyre tread left inner: 25%; left outer: 55%; right inner: 45%; right outer: 40% Weights Unladen weight: 13,060 kg Payload: 34,940 kg gross vehicle weight: 48,000 kg Functional Body manufacturer: KASSBOHRER LOWBED LB3E Extendable body: Yes Maintenance, history and condition APK (main technical inspection): valid until 05.2026 Technical condition: very good Cosmetic condition: very good Identification Registration number: QACP318 For more information Please contact Arne Honingh for further details. Itsdpfeyz A Ugox Akxjf