Used Bmg Labtec Fluostar Omega Microplate Reader for sale (638)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system Ibodpfxjzhub As Ahysc - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, functionality: fully functional, The LASKA WW 130-2 is an industrial meat grinder from the LASKA brand.. With a 130 mm throat diameter and 15 kW of power, the machine is designed for efficient raw material grinding in medium and large meat and food processing plants. How does the LASKA WW 130-2 meat grinder work? Raw material is loaded into the hopper, from where a screw feeds it to the cutting set consisting of a knife and perforated plates. The rotating knife cuts successive layers of material forced through the plate holes, producing uniform grinding at the required coarseness. The degree of grinding depends on the perforated plate used, and the cutting set can be quickly disassembled for cleaning and replacement of parts. Key advantages of the LASKA WW 130-2 meat grinder The large 130 mm throat diameter and 15 kW drive power allow continuous, efficient work with large batches of raw material, which suits high-volume plants. Solid industrial construction ensures a long service life, and the simple working system makes operation, cleaning, and maintenance easier. The IP 55 protection class stated on the nameplate means the electrical system is protected against dust and water jets, which is important in environments where equipment is regularly washed down. Technical specifications of the LASKA WW 130-2 meat grinder Manufacturer: LASKA Type: WW 130-2 Factory number: L 6850 Year of manufacture: 1999 Throat diameter: 130 mm Ibsdpfxjz N Ax Rs Ahysc Power supply: 3 x 400 V, 50 Hz Rated power: 15 kW Rated current: 28 A Protection class: IP 55 Capacity: up to approx. 5,000 kg/h Hopper capacity: approx. 175 l Compliance: CE Application of the LASKA WW 130-2 meat grinder The LASKA WW 130-2 meat grinder is used in meat processing plants for grinding meat in the production of cold cuts, sausages, minced meat, and fillings. The machine also performs well in other food processing plants, wherever efficient grinding of large quantities of raw material is required.

Condition: used, axle configuration: 3 axles, first registration: 11/2020, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,010 mm, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 35540 kg, Tare weight: 6460 kg, Gross vehicle weight: 42000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2020, Customs seal, Sliding roof, Axle type: SAF, HARD WOODEN OMEGA FLOOR // SAF AXLES DISC BRAKES = Further Information = General Information Cab: Day cab License plate: OS-81-LP Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 8 mm Weights Tare weight: 6,460 kg Payload: 35,540 kg GVW: 42,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: None Financial Information Leasing price: 202 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" Ibsdjzr Emkepfx Ahyjc • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min Ijdpfsz N A Nisx Ahyebc VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, The RISCO RS 503 vacuum filler is a high-capacity machine from the RISCO brand, manufactured in 2005, designed for filling and portioning meat mixtures in large food processing plants. With a capacity of up to 6,500 kg/h, a portioning speed of up to 700 portions per minute, and a 350-liter hopper suited to 200 l trolleys, the unit performs well in high-volume production. How does the RISCO RS 503 vacuum filler work? Raw material goes into the 350-liter hopper, which can be fed directly from 200 l trolleys. Operating under vacuum removes air from the mass, while a vane pump with a feeding system ensures a continuous, stable flow of product to the machine outlet. The servo drive and a multifunction controller allow precise setting of filling parameters and portion size, and quick connection to other equipment such as clippers, forming machines, or packaging lines makes it possible to build complete production lines. In a configuration with an integrated RS 70 linear grinder, the machine can fill and grind the raw material at the same time. Key advantages of the RISCO RS 503 vacuum filler High capacity of up to 6,500 kg/h and a portioning speed of up to 700 portions/min allow continuous work with large batches of raw material, which is crucial in high-volume plants. The large 350 l hopper matched to 200 l trolleys reduces the number of refills and shortens downtime. Vacuum operation improves the uniformity and structure of the mass and limits air pockets in finished products. The servo drive and simple parameter control make it easy to adapt the machine to different recipes, and the solid construction with a weight of approx. 1,060 kg ensures stable operation under intensive use. Technical specifications of the RISCO RS 503 vacuum filler Manufacturer: RISCO Stuffer model: RS 503 Ibjdpfx Ahez N A Rasyoc Year of manufacture: 2005 Filling machine power supply: 400 V, 3 phases, 50 Hz Installed power: 14 kW Filling machine weight: approx. 1,060 kg Filling capacity: up to 6,500 kg/h Portioning speed: up to 700 portions/min Hopper capacity: 350 l (for 200 l trolleys)

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Ibjdpjq Izpkjfx Ahyoc Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Ibjdpjn I Uwfefx Ahyec

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 3CR00632, Leasing return condition Very good, full-service contract with Canon Model Serial No Period To Line Description End Meter Read imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Color A3 200,111 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Color A4 7,617,400 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Mono A3 892 imagePRESS C10010 Booklet Finisher 3CR00632 31.03.2026 Mono A4 8,209,072 Canon imagePRESS C10010 VP 1 × Professional color digital printing system including PRISMAsync & Booklet Finisher High-performance production printing systems for high-quality color and black & white productions with extensive paper feeding, workflow control, and scan & finishing equipment. System overview Quantity 1 System Model Canon imagePRESS C10010 VP System Type Professional color digital printing system Printing Speed up to 100 pages/minute DIN A4 A3 Printing Speed up to 57 pages/minute SRA3 Printing Speed up to 54 pages/minute Max. Paper Size up to 330 × 483 mm or special formats Paper Weight up to 350 g/m² depending on the feeder/finisher Duplex Printing Yes Color Management / Controller Canon PRISMAsync Print Server Colors CMYK Toner Canon T02 – BK / C / M / Y Equipment per System Printing System • imagePRESS C10010 VP Series / Marking Engine • imagePRESS C10010 VP Series Fixing Station • imagePRESS C10010 VP Series Power Supply Unit • Operating Panel-A5 incl. Operating Panel Foot-D1 • Operator Attention Light-D1 • CABLE MAINS, C13 EUR • Canon TONER T02: BK, C, M and Y PRISMAsync Print Server & Software • PRISMAsync for imagePRESS C10010VP-A1 • PRISMAsync Options Bundle C10010VP-A1 • PCL6 TP-J1 • IPDS-J1 • PDF for IPDS-J1 • PRISMAsync Remote Match imagePRESS C10010VP • imagePRESS C10010 License / Resale License Paper Feeder & Scanner • POD Deck-D1 – High-performance paper feeder for production Iodpsz Izzmofx Ahyjbc • Duplex Color Image Reader Unit-M2 • Reader Attachment Kit-B1 Finishing • Finisher-AN1 – Professional collating and booklet finishing unit • Automatic sorting, set collation, and booklet making • Punch Unit-BT1 – Automatic 2/4-hole punching Color Management / Process Control • i1 Process Control v5.3 to support color calibration and reproducible printing results Scope of Supply 1 × Canon imagePRESS C10010 VP – with PRISMAsync Controller, POD Deck, Duplex Color Scanner, Booklet Finisher, 2/4-hole punching, as well as the workflow and color management licenses listed above.

Condition: reconditioned (used), The Risco RS4001 Vacuum Filler is a highly efficient and versatile machine designed for use in the food processing industry, particularly for filling and portioning sausages, hamburgers, meatballs, pâtés, and other similar products. The RS4001 features a powerful vacuum system that ensures consistent product filling with minimal air inclusion, which is essential for maintaining product quality, especially in sausages and similar products, it is also equipped with advanced portioning technology that allows for precise control over portion sizes. Technical informations: Hopper capacity: 260l Power: 6.3kW Portioning range: 5-10.000 grams Efficiency: up to 380 portions/min / 6.500 kg/h Dimensions: L: 1950 x W: 1200 x H: 1950mm Weight: 900kg Ijdsubvkwjpfx Ahyjbc Machine after complete renovation

Condition: like new (used), AIRPOL PR75 Screw compressor Excess pressure [MPa] - execution options: 0.75 / 1.0 / 1.3 Variable performance: Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740... Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740 Capacity min-max [m3 / h] [1.3 MPa]: 212 - 565 Compressed air connection: G 2 Ambient temperature [° C]: +5 ÷ +40 Cooling air demand [m³ / h]: 11700 Temperature of compressed air [° C]: about 10 above ambient temperature Sound level [db (A)]: 75 Transmission mode: direct drive Rated engine power [kW]: 75 Rated fan motor power [kW]: 4 Degree of motor protection: IP55 Supply voltage [V]: 400 Recommended cross section of the power cord [mm2]: 3x70 + PE Protection [A]: 160 Manufacturer: Airpol Model: PR75 Height: 2200 mm Width: 1500 mm Length: 1675 mm Weight: 1900 kg Isdpfx Ahed S Udcoyobc Total power: 75 kW

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa Ibjdpfx Asqu N U Dohyoc 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Ijdpfxekvrxue Ahyjbc Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter Isdpfxol Ikzgj Ahyebc * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Iedpfxolfilye Ahyjbc Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Wheelbase: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight [80 km/h] 45,000 kg * Gross vehicle weight [60 km/h] 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as self-steering axle * Wabco braking system * Tires: 445/45/R 19.5 Chassis: * Chassis made of high-quality, high-strength S700 MC steel, in accordance with ISO standards 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Front landing gear, folding outriggers at the rear Ibsdpfxsrukucs Ahysc Ramp: * Mounts for ramps at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 container locking devices * 1,500 mm high steel bulkhead with Code XL certification Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red We are happy to provide you with further information.

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Ibsdsrxr R Sepfx Ahyoc

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Ibedpfx Ahot Dwh Rjyjc

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Ibjdst Dx Urjpfx Ahysc

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Iedpfotgqfdsx Ahyjbc

Condition: used, Year of construction: 2014, Equipment: compressed air brake, Spray nozzle up to compartment Nozzle holder axis rigid / Isdjt A A Srspfx Ahyjbc

Condition: used, Year of construction: 1990, Hydraul. Folding to the front Electric control panel Hydraulic lift / PTO shaft / Isdpfx Ahouambdjyjbc

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63600 € 1202.04 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming Iedowiq A Ijpfx Ahyobc - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12910 € 247.87 € 40 mm MK 4 350 mm 132-194-277-319-466-666-8 U/min 2.2 kW M33 755 mm 480 mm 2280 mm 490 kg Ibodpfx Ahswiq Tmeyec 0,1 - 0,2 - 0,3 mm/U 150 mm 80 - 880 mm 1225 mm 480 x 480 mm 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUEST OPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE)

Condition: used, This listing is for a CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer. The unit is in full working condition and is ready for immediate release. This Cleaver Scientific variable speed Vortex Mixer combines fast, efficient mixing with minimal vibration. Unlike other vortex mixers using elliptical orbits, the true circular orbit of the CSLVORTEX facilitates uniform sample-vortexing even at low speed. The CombiHead head, which is supplied as standard, accepts many different tube sizes, while the unique overmoulding technology used in its manufacture provides a sturdy plastic core with non-slip TPE that fits optional heads for microplates, microtubes, PCR strip tubes, 15ml and 50ml tubes and blood vials. CSLVORTEX may be used in touch or continuous mode, being activated by simply depressing the sample head and then stopped by releasing the pressure. An optimised counter balance system within the CSLVORTEX minimises vibration and movement of the unit during operation, whereas its lightweight construction and small footprint allow it to be readily transported and used in areas where space is restricted. Ibodpfx Aexx Avcjhyec

Condition: used, This listing is for 1 of 2 Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. - The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. Ijdexx Av Nepfx Ahyobc - The result is accurate, reproducible and safe heating of your samples. - There is a full range of models and options to cater for basic through to more sophisticated applications - choose from three digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and one digital high-temperature system (QBH2) with 2 blocks. These are complemented by an extensive range of interchangeable heating blocks to accommodate your sample tubes - from our standard range of blocks or tailored to suit your application. - In addition, for 2-block systems QBD2 and QBH2 we offer accessory blocks for accommodating microplates and microtube strips. - Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). - Rapid heat-up time. - Stability and uniformity ± 0.1°C. - Integral timer function optional external probe for in-sample or in-block temperature control. - Robust, compact, contemporary design. - Block extraction tool included as standard, for easy and safe removal of blocks.