Used Biegemaster Dura 4.1,25 for sale (205)

Condition: used, mileage: 521,699 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air tank, driver assistance system: Attention Assist (fatigue detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with band filter, info display 10.4 cm with additional indicator, integral rear, communication interface, fuel tank: 290 L aluminum, alloy wheels 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 123-10b, frame lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), fifth-wheel coupling, low-maintenance, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semitrailer, preparation for revolving beacon, transmission oil cooler Additional features: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right side, exterior mirrors electrically adjustable & heated, battery 170 Ah, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting, cab: S ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf/air, front spring bracket aluminum, power windows, alternator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown wheel 440, body/superstructure: tractor unit, central locking system, 3-piece mudguards, unregulated steering assist pump, front air intake, engine 10.7 L - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, cab seats: functional passenger seat, cab seats: standard driver's suspension seat, front splash guard, front axle stabilizer, 24V cab socket, tachograph/EC control device, aerodynamically shaped underbody panel, front underrun protection, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t VIN: WDB96340310049335 First registration: 12.05.2016 Net price Hfodouh Nd Ropfx Adxsl Tel./WhatsApp:

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation Hsdpjw N Ua Nofx Adxefl XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Condition: used, overall weight: 19,000 kg, first registration: 03/2023, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, * well-maintained trailer * mounting bracket for truck-mounted forklift Hfodpeyvmx Eefx Adxjl * high-coupled * aluminium wheels Dura Bright new * tyre size 385/55 R22.5 * Wabco braking system * BPW ET0 axle * advertising easy to remove

Condition: used, mileage: 550,165 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Basic Data: * Vehicle Model: TGX 18.500 4X2 LLS-U * Gross Weight: 18,000 kg (national registration) / 18,600 kg (Technical Load Plus) * 1st Front Axle: 7,500 kg * 1st Rear Axle: 11,500 kg Technical Specifications: * Engine: D2676LF51 – 500 HP / 368 kW EURO 6 SCR – 2500 Nm C-R OBD-C * Transmission: MAN TipMatic® 14 30 OD with Retarder 35 * Fuel Tanks: Aluminum 480l right, 480l left, 80l AdBlue * Front Axle: VOK-08 dropped, front air suspension 7.5 t * Rear Suspension: Air, 11.5 t * Brakes: MAN BrakeMatic (electronic braking system), disc brakes front and rear * Wheels: ALCOA Dura-Bright EVO aluminum wheels * Cab: High-roof 'XXL', 2440mm wide, 2280mm long, interior in Urban Concrete, NORDIC cab insulation (cold-resistant) * Seats: Driver’s and passenger’s comfort seat, air-suspended, ventilated, with lumbar support and heating * Lighting: LED daytime running lights, halogen double headlights H7, low beam with light sensor, interior lighting red/white, ambient lighting * Mirrors: Main and wide-angle mirrors, electrically adjustable and heated, kerb mirror, EU front mirror * Safety Features: Emergency Brake Assist 2 (EBA2), Anti-lock Braking System (ABS), Traction Control (ASR), Electronic Stability Program (ESP), seatbelt indicator, 90 km/h speed limiter, cruise control with distance control (ACC) Hedpfx Adjwdll Toxjfl * Comfort: Air conditioning, additional air heating, fridge under sleeper bunk, 2 bunks with storage, mattresses for bunks, bunk tensioning net, sun blinds, cup holder, dashboard drawer * Multimedia: MAN Media Package Navigation, MAN Media Truck Advanced radio with 7" color display, Europe navigation SD, hands-free function for 2 mobile phones, video function via USB/SD interface, AUX-in/USB in dashboard * Other: MAN AttentionGuard, Lane Guard System IV (LGS IV), MAN Tronic (on-board computer), TollCollect pre-installation, compressed air connection in cab, work light, fire extinguisher, first aid kit, breakdown warning triangle, warning beacon, mud flaps, wheel chock, wheel nut covers, smoker’s package, carpet on engine tunnel -----Internal Vehicle Number: 10756-----Subject to errors & prior sale.

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Hedpfx Asyrc Akedxjfl Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts Hfjdpfx Adozxz R Sexol 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: used, mileage: 226,000 km, power: 390 kW (530.25 HP), first registration: 01/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: gold, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, DAF XG 530 4x2 Tractor Unit ----Göppl GmbH Commercial Vehicles - DAF Authorized Dealer ----Used Vehicle Registration Date: 07.01.2022 Equipment: * Climate Package * Roof Spoiler * Side Fenders * Cab Length: 2.69m, Cab Width: 2.5m * LED Skylights * DAF Digital Mirror System / Camera System replacing the main and wide-angle mirrors * LED Headlights and Fog Lights * Windshield with Sun Protection Film * DAF Corner View * Driver's Seat: Super Air Alcantara, rotatable with leather edges Hfsdpfsyadzdox Adxjl * Seat Heating & Seat Ventilation for Driver & Passenger Seat * Passenger Seat: Super Air Alcantara, rotatable with leather edges * Steering Wheel with Leather Trim * Curtains with Privacy Curtain * Storage Compartment * DAF Relax Bed * Refrigerator * Automatic Climate Control * Integrated Stationary Air Conditioning System * DAF Infotainment Luxury Plus * DAF Connect * Preparation for TV Connection * ECAS Remote Control with Extended Functions * Engine MX-13, 390 kW/530 hp - EURO6 * ECO Mode * Automated 12-Speed TraXon Transmission * MX Engine Brake and ZF Intarder * Wheelbase 4.00m, Rear Overhang 0.99m * Tires: Michelin * Front Axle: 315/70R 22.2 * Rear Axle: 315/70R 22.5 * Alcoa Dura Bright Aluminum Rims * Rear Axle Ratio: 2.40 * Driven Rear Axle with Differential Lock * Aluminum Fuel Tanks: 845 liters + 340 liters = total 1185 liters * AdBlue Tank 85 liters * Fifth Wheel Coupling Jost JSK42CW Cast Iron 150+40mm * 10.1-inch Touch Display with Integrated Navigation * DAB / DAB+ FM Radio with Streaming Function via USB and Bluetooth * 8 Speakers * Lane Change Warning System * Acoustic Reversing Warning System Optional: * OBU Installation * Tachograph Check * CB Radio * Maintenance Services * TÜV Inspection (German Vehicle Inspection) ---- Göppl GmbH Commercial Vehicles Weiden - Regensburg - DAF Service Partner - FIAT Professional Service Partner Errors and prior sales excepted. Sales only to businesses.

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2026, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, Year of construction: 2026, = Additional Options and Accessories = - LED lighting - Air suspension Hodpfx Aszikhhjdxjfl = Notes = Internal number for customer inquiries: 2-660 Registered for 3 months, returned from rental. Used PAVIC HTA 20 66Z short log trailer with ALCOA DURA BRIGHT. IMMEDIATELY AVAILABLE! 2-axle skeletal trailer 4x OPTIPA SL skeletal couplings 8x OPTIPA AL10 loading beams 2x buffer beams (steel) Chassis length approx. 6600 mm Front overhang approx. 710 mm (turntable) Screwable hooks on the loading beams for load securing Payload 14,750 kg Technically possible total weight 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Steering turntable with double ball bearing row, permissible axle load max. 20 tons Lifting cable at the front Smartboard Wabco Highly visible signal lamp system at the front as an indication of the maximum air spring pressure LED lighting LED work lights High-quality KTL coating - including baking process Twin tires: 275/70 R 22.5 with branded tires Aluminum wheel rims, manufacturer ALCOA Dura-Bright Financing available through our financing partners. Our sales team is available to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle Configuration Tire Size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front Axle: Aluminum rims; Steered Rear Axle: Aluminum rims Functional Trailer Body Brand: PAVIC short log skeletal trailer OPTIPA SL Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical Condition: very good Optical Condition: very good Damage: none

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: red, Archive images shown. The vehicle may currently be in use. #Curtainsider Semi-Trailer Chassis Lightweight high-tensile steel welded construction, fifth wheel plate with replaceable 2" kingpin New slightly angled outer frame with "Load-Lock-Profil" for load strap attachment 3 pairs of additional recessed lashing rings in outer frame, 2.5 t each 14 pairs of additional recessed lashing rings in outer frame, 2.5 t each 24 t two-speed landing gear, single-side operation, straight legs with load compensation SAF landing gear Note: Clear landing leg corner dimension / rear swing clearance approx. 1,930 mm Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Painted RAL 3002 Carmine Red No paint warranty on overpainted coated components Hodpfx Adexbzkkoxjfl Galvanised steel rear underrun protection Painted RAL 9010 Pure White, incl. underrun protection brackets No paint warranty on overpainted coated components Quarter mudguards in front of and behind axle assembly EC-compliant anti-spray mudflaps Rear impact protection 1 aluminium ladder, approx. 2,550 mm, with side-mounted holder behind side underrun protection Bolted outer frame rail for direct curtain tensioners, protruding approx. 15–20 mm above loading platform, with perforated top profile for load straps 2 plastic toolboxes, W 800/H 450/D 450 mm 1 each on left and right, behind the 3rd axle #Axles + Suspension BPW disc brake axles with 430 mm brake discs Wheel hubs painted RAL 3002 Carmine Red "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Air suspension #Braking System Twin-line air brake system Colour-coded pipe routing for easy servicing Spring parking brake 2 non-interchangeable front coupling heads, without connecting lines 24 V WABCO EBS electronic braking system with front EBS socket, without connecting cable Warning: Trailer must only be towed by vehicles ensuring ABS functionality Raise/lower valve with auto-reset function Vehicle stability system Idem telematics incl. LIN battery, coupling sensor and tracking #Wheels and Tyres 385/65 R22.5 tyres, manufacturer's choice Polished Alcoa Dura-Bright aluminium wheels #Electrical System 24 V multi-chamber lights with yellow side LED lights Light carrier painted RAL 9010 Pure White No paint warranty on overpainted coated components 2 front white position lights 2 rear white/red outline marker lights 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets LED work lights on both sides Positioned at the first cross-member behind the landing gear 2 additional rear LED work lights #Curtain Curtain with welded-in horizontal and vertical reinforcement straps Archive images shown. The vehicle may currently be in use.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Hfjdpstp H Erofx Adxel Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C Hodpfx Aowhfiysdxsfl ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: used, mileage: 261,000 km, power: 330 kW (448.67 HP), first registration: 06/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), We are very pleased that our offer has aroused your interest, and we assure you that you can purchase a good and affordable vehicle with a traceable service history at our dealership! Special equipment: Engine tunnel storage compartment, high, work light, work light on the upper rear wall of the cab, audio system: CD radio (Bluetooth, USB), CB radio, cockpit classic, air horn, cab: steel-sprung, comfort, tinted windshield with band filter, speed limiter, transmission 12-speed - type: G 281-12, rear axle differential 440, info display 12.7 cm with video function, fender center panel low, fuel tank: 290 L aluminum, left, cooling capacity for hot climates, light alloy rims 9.00x22.5 (ALCOA Dura-Bright), air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine mount, auxiliary drive MB 131-2c, frame lowering without air spring residual pressure control, frame overhang 750 mm, smoker's package, reversing warning system acoustic (warning signal outside), rear window, fifth wheel coupling, low maintenance, disc brakes with partial protection, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat sprung comfort seat, sun visor outside, 24V socket in the passenger footwell additionally, preparation for rotating beacon, preparation for reversing camera Additional equipment: Emission standard EURO 6, axle configuration: 6x4, front axle load 7.5 t, approach / front mirrors heated, trailer electrical and brake connection high, trailer socket 24V / 15-pin, Arocs 5, step on cab left, battery 170 Ah, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for headlights (light sensor), cab: tilting device hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: mounting height 600 mm, cab variant: M, stowage flap outside left, stowage compartments with lid behind driver and passenger seat, suspension: front springs 7.5 t, 2 leaves, power windows, generator 100 A, urea tank (AdBlue): 60 L, lift roof manual (steel), body / superstructure: tractor unit, comfort central locking system, fender 3-piece, power steering pump unregulated, multifunction steering wheel, steering oil cooler, air intake behind cab, air dryer heated, engine 12.8 L - 330 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local distribution, wheelbase not defined, wheelbase variant 3300 mm, curb mirrors, exhaust gas heat recovery, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger swivel seat, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EG control device, Truck Data Center 7 (fleet management system), preparation for toll collection, preparation for Truck Data Center (fleet management system), front axle straight, water pump regulated, permissible gross weight 26.0 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Hsdpfx Adezq Ttpexjfl If you wish, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2020, Equipment: ABS, FFB semi-trailer with silo, model EUT 60.3-4/4, for the transport of feed, approx. 60,000 liters volume, 4-chamber aluminum design. Rated for a trailer total weight of 34,000 kg: 10 tons saddle pressure, 24 tons axle load technically permissible, 13 tons saddle pressure, 27 tons axle load (3 x 9 tons). Unladen saddle height 1250 mm. Container design: Container with 4 chambers, approx. 8,000 / 19,000 / 17,000 / 16,000 liters volume. Pressure equalization via elongated holes in the partition walls. 4 material discharge cones with special FFB material discharge bowls, DN 800 / DN 1000. Fluidization via special fluidization valve, manufacturer OLI. Operating parameters: The pressure vessel complies with the EC Pressure Equipment Directive. Operating pressure 2 bar, test overpressure 3 bar. Wall thickness approx. 5 mm. Operating temperature -40 to 80°C. 5 manholes DN 450 with pivoting and folding dome covers. Material discharge: For each material discharge cone, a central material sump with a diameter of 200 mm. The sumps are equipped with bottom flaps DN 200 with an aluminum housing, steel plate and stainless steel shaft, NBR seal (white), which are operated laterally via remote controls. A 4" material collection line made of special steel is collected on the left side on the operating side in front of the axle unit. Chamber 1 and 2 collected in front of the axle unit and chamber 3 and 4 collected behind the axle unit. At the end of each material line, a 4" annular nozzle is installed for material acceleration. A 4" sight glass is installed behind each annular nozzle. Material discharge via one 4" TW coupling with a blank cover. Agitation nozzles in the sumps. Air piping: An aluminum air collection line is mounted on the left side on the operating side and runs to the rear with a Storz B coupling. Ladder and walkway: One stainless steel access ladder on the front and one on the rear, left side. Aluminum safety walkway on the left. Brake lock when the safety guardrail is raised. Chassis: The saddle plate is equipped with a tested 2" kingpin. Suspension: Axle unit, manufacturer SAF, type INTRADISC PLUS II INTEGRAL, 3 x 9 tons, disc brakes ø 430 mm. The air-sprung axle unit is mounted in FFB aluminum suspension. Axle spacing 2 x 1310 mm. First axle as a lift axle, controllable from the driver's cab, with starting aid. Third axle as a trailing steering axle, lockable via reverse gear and additionally via a switch on the control panel. Braking system: 2-sensor 2-module SLV ABS/EBS pneumatic braking system equipped with a spring-loaded parking brake on two axles. RSS - Rollover Stability Support. Air suspension system: Air-sprung suspension with automatic height adjustment. Lifting and lowering valve mounted laterally on a control panel in front of the first axle. Tires: 6 tires, size 385/65 R22.5, are installed. Rims: Forged aluminum rims, manufacturer Alcoa, type Dura Bright EVO, size 22.5 x 11.75. Offset: 120 mm. Wheel bolt holes: 26 mm. Wheel cover: Single-wheel plastic mudguards, black, attached with stainless steel brackets. Mud flaps mounted on the rear mudguards. Electrical system: 24-volt electrical system consisting of: - a 15-pole socket mounted in front of the saddle plate. - two multi-chamber lights integrated into the rear underrun protection. - yellow side marker lights. - outline lights at the rear. - license plate lights at the rear. - 4 work lights, 2 x left at the discharge (switched via parking lights and additionally via a sw Hedpfozr A R Hsx Adxofl

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Hfedpfx Adozkuiroxjl Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: used, mileage: 362,558 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort Cab: Globetrotter safety cab FH (High Sleeper Cab, height 215 cm, length 205 cm) * Living Package: One bed, fold-down lower bunk (2000x815/740/660 mm) with safety net, pocket spring mattress * Air conditioning: Automatic temperature control with sun sensor * Auxiliary heater: Cab, 2 kW * Cool box: 33 liters with freezer compartment under the bunk * Interior: Seats in fabric (blue/dark blue), interior in gray fabric, armrests with vinyl, two armrests on the driver's seat * Driver's seat: Comfort, air-suspended, heated, seatbelt integrated * Passenger seat: Standard, non-suspended * Curtains: On windshield and windows * Storage compartments: Above the bunk (245 liters), storage space under the bunk * Vanity/shaving mirror * Shift console (luxury) on the bunk: Controls for lights, heating/air conditioning, sunroof, door, alarm clock, windows, and radio * Writing board for the steering wheel ----Infotainment & Connectivity Instruments: Digital 12'' driver information display * Second 9'' touchscreen color display * Audio: Multi-format, 8 speakers, tweeters, AM/FM, USB port (3-way) * Navigation: Info and media package with navigation, map region Europe * Instruments High: Digital 12'' driver information display, traffic sign recognition (in conjunction with LSS-DW), chrome bezel * Telematics: Telematics gateway with 4G * Various software services (e.g., Alexa Built-In, Android Auto, TomTom Navigation App) * Immobilizer: Transponder in the key * Central locking with remote control * Tachograph: Digital, Generation 2 ----Driver Assistance: Hfedpsztih Iefx Adxsl * Lane keeping assistant * Collision warning with emergency braking function * Camera monitoring of the passenger side at the front * Traffic sign recognition * Brakes: Disc brakes * EBS (Electronic Braking System), ABS * ESP (Electronic Stability Program) ----Lights & Visibility: * LED headlights with adaptive high beams * Automatic light switching between daytime running lights and low beams via light sensor * Static LED cornering lights * Daytime running lights LED, "V-Light" * LED fog lights * LED taillights * Headlight cleaning system * Rain sensor * Light and visibility package Superplus * Two work lights at the rear top of the cab, LED * Mirrors, heated and electrically adjustable with close-range camera on the passenger side * Exterior sun visors * Aluminum rims Dura-Bright EVO, chrome rings ----Engine, Transmission & Technology Engine: Diesel engine D13K500, 12.8 l, 510 hp / 375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter, and exhaust gas recirculation * Engine brake, exhaust pressure regulator (incl. engine control for I-Shift) * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * PTO PTR-FH (fast), transmission-side, connection: 1 SAE flange at the rear (600 NM) * PTO functions for I-Shift, basic * Compact retarder, transmission-mounted (rear) with medium oil, braking power: 450 kW * Suspension: Air suspension at the rear, parabolic suspension at the front, electronic level control * Differential lock, rear axle ----Exterior & Structure Fifth wheel coupling: Jost JSK 37, fifth wheel coupling height 150 mm + substructure, central lubrication * Extension element for work platform * GHH Rand CS 700 Light R-PTO L compressor ----* Tire dimension front axle: 315/80R22,5 * Tire dimension rear axle: 315/80R22,5 * Fuel tank: 650 liters * AdBlue tank: 100 liters * Technical total weight: 21,000 kg * Tare weight: 7,882 kg * Wheelbase: 3,800 mm * Inspection

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 • Distance spindle nose to table: 150–660 mm • Tool magazine: 30 tools, side-mount ATC Hfsdpfezc Nfajx Adxjl Technical Specification Taper Size BT 40

Condition: used, mileage: 631,629 km, power: 345 kW (469.07 HP), first registration: 06/2022, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,990 mm, total width: 2,540 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Adaptive cruise control - Adjustable handlebar with neck tilt - Air compressor 1100 ltr - Airflow package - Alcoa Dura Bright rims - Aluminum fuel tank - Beacon(s) - Drivers seat comfort 5 - Dynamic steering - Heated exterior mirrors - Locking differential - Preparation OBU - Remote central locking - Sleeping cabin - Steering wheel audio controls - Toolbox - Volvo engine brake plus = More information = General information Number of doors: 2 Registration number: 25-BTD-6 Hfjdpfx Adjzp N Duexol Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Front axle: Tyre size: 385/65/22.5; Alloy wheels; Max. axle load: 9000 kg; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Alloy wheels; Max. axle load: 11500 kg; Tyre profile left inner: 65%; Tyre profile left outer: 65%; Tyre profile right outer: 65%; Tyre profile right outer: 65%; Suspension: air suspension Engine type: Volvo I SHIFT Weights Empty weight: 7.482 kg Carrying capacity: 13.018 kg GVW: 20.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 04/2027

Condition: used, mileage: 335 km, power: 390 kW (530.25 HP), first registration: 09/2026, fuel type: diesel, overall weight: 18,000 kg, color: red, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), soot filter, Vehicle number: 263354 First owner, accident-free, regularly serviced according to service schedule, non-smoker ---- ASSISTANCE SYSTEMS * Electronic braking system with ABS and ASR * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Keeping Assist * Traffic Sign Recognition ENGINE, TRANSMISSION & CHASSIS * High Performance Engine Brake * Air compressor, 2 cylinders * Single-plate clutch * Front axle, stub axle version * Stabilizer bar, front axle INTERIOR * Automatic climate control LIGHTS & VISIBILITY * Night driving light switch WHEELS * Aluminum rims 11.75 x 22.5, front axle, Dura-Bright, Alcoa * Aluminum rims 9.00 x 22.5, Dura-Bright, Alcoa * Tire pressure monitoring system EXTERIOR * Air intake, behind the cab, mounted * Footplate over the frame, partial cover * Fifth wheel coupling, low maintenance * Fifth wheel angle, with hole pattern * Fifth wheel coupling height, H = 190 mm * Cab entry left/right, fixed * MirrorCam mount chrome, lower cover in cab color OTHER EQUIPMENT * Wheelbase 3700 mm * Rear axle, bevel gear 440, hypoid, 13.0 t Hjdpfxozxkzgs Adxsfl * Rear axle with active lubrication, unregulated * Front suspension 8.0 t, 2-leaf * Tank 570 l, left, 650 x 700 x 1450 mm, aluminum * Second tank, right * Main tank, left * Fifth wheel position +600 mm * Cab width 2.50 m Additional Features * 3rd generation engine OM471 * AdBlue tank 100 l, left * Secondary oil retarder * ProCabin-Giga, flat floor * Digital tachograph, 2nd generation, version 2, ADR * Frontguard Assist * ATS warranty according to general terms and conditions, 4th year/600,000 km * Auxiliary climate control system * Secondary oil retarder * Driver and passenger air-suspended seats * Fuel tank right 430 L * ProCabinGiga cab ---- Subject to prior sale and errors. The vehicle description is for general identification purposes only and does not constitute a guarantee in the legal sense. Please contact our sales team for detailed information on the equipment. Please contact us.

Condition: used, mileage: 536,932 km, power: 427 kW (580.56 HP), first registration: 03/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,750 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beams - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Leather interior - Alloy wheels - Air suspension - Air-suspended seats - PTO - Radio/Multimedia system - Disc brakes - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Tool box - Windshield = Notes = Internal number for customer inquiries: 4-266 Scania R580 6x4 short log truck with Epsilon M12Z 8.3 loading crane The stated price of €89,990.00 net refers only to the truck! Vehicle description: OptiPa platform body 4 OPTIPA platforms with 8 OPTIPA AL10 loading platforms Sturdy aluminum front wall Truck: ALCOA DURA BRIGHT ALUMINUM RIMS!!!! LEATHER INTERIOR!!!! LED daytime running lights, fog lights, position lights, and tail lights Protective cover for rear lights Suspension: leaf spring/air Drive: 6x4 Wheelbase: 4,750 mm Tire size: front axle 385/65 R22.5, rear axle 315/80 R22.5 Engine: 580 hp V8 Opticruise automatic transmission with clutch pedal Differential lock in rear axle Trailer hitch, ø40mm Central locking with remote control Glass sunroof, electric All exterior mirrors electrically adjustable and heated Auxiliary heater Air conditioning Digital axle load display in the cab for air-suspended axles Display in the instrument panel for trailer data (axle load) Cooler box under the bunk, fully retractable Full brake assist Multi-function steering wheel, leather, height and tilt adjustable, with parking position Navigation, Europe Smartphone integration Infotainment control Lane departure warning Driver alertness system and more This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = General Information Cab: Long-haul Technical Information Number of cylinders: 8 Hedpfx Adoylxvaoxsfl GVWR: 26,000 kg Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Alloy rims; Steered; Suspension: Leaf spring Rear axle 1: Tire size: 315/80-22.5; Differential lock; Alloy rims; Suspension: Air suspension Rear axle 2: Tire size: 315/80-22.5; Differential lock; Alloy rims; Suspension: Air suspension Functional Crane: Palfinger Epsilon M12Z 83 Interior Upholstery: Leather Condition Damage: None

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registration 01/2023, from first owner Dimensions (L x W x H) 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight 9,640 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Pneumatically foldable rear underrun protection Straight front wall, with interior ladder Rear portal doors 50:50, pneumatic secondary release Reinforced tarpaulin cover HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank-type landing gears, full load capacity SAF axles with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with overrun protection RSS WABCO Smartboard Raising and lowering device Hedjzwr Uropfx Adxefl Automatic tipping lowering Tires: 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum step ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING; with us, full-service rental options are immediately available.

Condition: used, mileage: 573,000 km, power: 350 kW (475.87 HP), first registration: 05/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 8,250 mm, loading space width: 2,470 mm, loading space height: 2,290 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, We are very pleased that our offer has aroused your interest and assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our company! Hsdpszvudmsfx Adxefl MB 2548 beverage transport semi-trailer with certified tilting side wall body and rear cargo securing system 2 x LBW (tail lift) STEERING AXLE RETARDER TRACTOR UNIT 8,250 mm LONG / 20 PALLETS TRAILER 7,300 mm LONG / 18 PALLETS Special equipment: Front axle load 8.0 t, Airbag driver side, Ambient lighting LED, Audio-navigation system Bluetooth comfort, Exhaust to the right outside, Right exterior mirror with maneuvering position, Bi-Xenon headlights, Headlight cleaning system (SRA), Brake connection standard and DuoMatic, CB radio, High-pressure air unit, Air horns (2) on the cab roof, Electrical pre-wiring in the cab 24V / 100 A, Cab: Width 2.50 m, Cab floor level, Cab: Mounting height 765 mm, Cab: Tilting mechanism electro-hydraulic, Carpet on the engine tunnel, Sun blind side window, driver's door, 12V socket additionally, Air connection in the cab, Cab: Interior Style-Line, Mercedes star, illuminated, Info display 12.7 cm with additional display, Air connection in the cab, Steering wheel (leather), Windshield tinted, Gearbox 12-speed - Type: G 281-12, Notebook holder, Urea tank (AdBlue): 75 liters, Info display 12.7 cm with video function, Folding table in the bulkhead, Automatic climate control, Waste heat recovery, Upper comfort berth, wide, Additional fuel pre-filter, Fuel tank: 630 liters aluminum, Cool box / refrigerator, LM rims 9.00x22.5 (ALCOA Dura-Bright), Air intake integrated, Air compressor 2-cylinder, Engine brake reinforced, Tag axle steered, liftable, PremiumComfort mattress upper, PremiumComfort mattress lower, Retarder, Switch tail lift, Sliding/lifting roof electric (glass), Interface fleet management system, Drawers under bulkhead, Circuit breaker, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sun blind electric, 2-part, Sun blind side windows, driver and passenger door, Sound system, Stowage box left under cab, 12V socket in the passenger footwell, 24V / 25 A socket in the passenger footwell, Preparation for reversing camera, Additional thermal insulation Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Actros 4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Air tank steel, Cab: L StreamSpace, Cab variant: StreamSpace, Lifting roof electric, Preparation comfort berth upper, wide, Cab: steel-sprung, Comfort, Suspension: Air / Air (full air), Window lift electric, Generator 100 A, Rear axle bevel gear 440, Body / Superstructure: Chassis, Lower comfort berth, Comfort locking system, Communication interface, Radiator grille, Steering pump regulated, Engine 12.8 liters - 350 kW R6 Diesel (OM 471), Engine compartment encapsulation, Tag axle single-tired, Ramp mirror, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger function seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stabilizer additionally, Rear axle / tag axle, Stowage flap outside left, Cab socket 24V, Tachograph / EC control

Condition: good (used), mileage: 711,091 km, power: 368 kW (500.34 HP), first registration: 02/2022, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,750 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,750 mm, total width: 2,550 mm, total height: 3,910 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed - LED lamp - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Blind spot sensor - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 11680 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 600 liters, Chassis height: 97 cm, Fifth wheel coupling: Fixed, Number of differentials: 1, Alloy wheels, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 6X2*4, durabright Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 8 mm; Suspension: Air suspension Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 12 mm; Tire tread depth right: 12 mm; Suspension: Air suspension Weights Unladen weight: 11,680 kg Payload: 15,320 kg GVW: 27,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 898 € per month (default, 60 months); Ask for more information and conditions Hedpeyf Al Ssfx Adxefl Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, mileage: 45,000 km, power: 390 kW (530.25 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, color: grey, gearing type: automatic, Equipment: soot filter, Vehicle number: 1424766004 1st owner, accident-free, full service history, non-smoker ---- Additional Features * We also offer financing, leasing, and rental options! * LA1 & LA2 7146 MOONSTONE GREY METALLIC * LZ2 FULL PAINT FINISH * C1W WHEELBASE 3700 MM * W9Z WEIGHT VARIANT 18.0 T (7.5/11.5) * M3E ENGINE OM471, R6, 12.8 L, 390 KW (530 HP), 2600 NM * M4X ENGINE VERSION EURO VI, E * M8B AIR INTAKE, BEHIND CAB, MOUNTED * M7K RADIATOR BLIND * M7T CONTROLLED WATER PUMP * M5V HIGH PERFORMANCE ENGINE BRAKE * M6M TWO-STAGE, CONSUMPTION-OPTIMIZED AIR COMPRESSOR * G5A SINGLE-PLATE CLUTCH * G2E TRANSMISSION G 281-12/14.93-1.0 * N6Z TRANSMISSION OIL COOLING * G5G MERCEDES POWERSHIFT 3 * G5L POWERSHIFT ADVANCED * G0K DRIVE PROGRAM ECONOMY/POWER * N2E NA MB 131-2C, PUMP * Z5M PTO, SINGLE * Z5S PTO PUMP, BELOW FRAME UPPER EDGE * A1Z FRONT AXLE, CRANKED DESIGN * A1D FRONT AXLE 8.0 T * A2E REAR AXLE, RING GEAR 440, HYPOID, 13.0 T * A3D REAR AXLE WITH ACTIVE LUBRICATION, NON-REGULATED * A5G AXLE RATIO I = 2.412 * A1A FRONT AXLE AIR SUSPENSION * J3Z AXLE LOAD MEASURING SYSTEM * R5E ALUMINIUM RIMS 11.75 X 22.5, FRONT, DURA-BRIGHT, ALCOA * R2Y ALUMINIUM RIMS 9.00 X 22.5, DURA-BRIGHT, ALCOA * R0L CUSTOMER-SPECIFIED TYRES FRONT * R0Z WHEEL NUT COVERS * S1Y TYRE PRESSURE MONITORING * A1 W48KBA 75 2 X 385/65 R 22.5 TL HIGHWAY RR STEERING? K? * A2 F38LCB 75 4 X 315/70 R 22.5 TL HIGHWAY RR DRIVE? L? * CZW STEP PLATE ABOVE FRAME, EXTENDED * C5P BOLTED FRAME * C0G REAR FRAME OVERHANG 1050 MM * C6G STEERING, SERVOTWIN * C6I POWER STEERING PUMP, CONTROLLED * C7T REAR INTEGRAL END * K0T MAIN TANK, LEFT * K1N TANK 570 L, LEFT, 650 X 700 X 1450 MM, ALUMINIUM * K3W ADBLUE TANK 75 L, LEFT * K5M LOCKABLE TANKS * K5S PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * Z4O NARROW TANK CROSS-SECTION * Z4R HIGH TANK CROSS-SECTION * K8D EXHAUST SYSTEM, OUTLET RIGHT SIDE EXTERNALLY, HORIZONTAL * U2G EXHAUST BOX * C8B REAR AXLE MUDGUARD, 2550 MM VEHICLE WIDTH * C8H 3-PIECE MUDGUARD, WITH EC SPLASH PROTECTION * C8I SPLASH PROTECTION (EC), FRONT * C7F FRONT UNDER-RUN PROTECTION (ECE), ALUMINIUM * C8Y UNDERBODY PANELING, AERODYNAMIC * F7A BUMPER, CORNERS PLASTIC * F7C BUMPER, CENTRE PART WITH TOWING EYELETS * C8Z SIDE SKIRTS, AERODYNAMIC * Q4Z FIFTH WHEEL, LOW MAINTENANCE, GREASED LOCK * Q6J FIFTH WHEEL COMPACT, JOST JSK 40K * Q6G FIFTH WHEEL, WITHOUT MOUNTING PLATE Hsdewflwljpfx Adxefl * Q6Z FIFTH WHEEL ANGLE, WITH HOLE GRID * Q4L FIFTH WHEEL HEIGHT, H = 190 MM * H2C FIFTH WHEEL OFFSET +600 MM * Q0W FIFTH WHEEL FROM FACTORY * B2A DISC BRAKE, FRONT AND REAR AXLE * B1B ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * B1F HEATING, ELECTRONIC AIR SUPPLY UNIT * B1H ELECTRONIC AIR SUPPLY & CONTROL, MEDIUM * B4A CONDENSATE MONITORING FOR AIR SYSTEM * B4L COMPRESSED AIR TANKS, ALUMINIUM, COMPLETE * B5D TRAILER STABILITY ASSIST (TSA) * B5J BRAKE AND ELECTRICAL CONNECTIONS, LOW * B2X PARKING BRAKE, ELECTRONIC * B3K SECONDARY OIL RETARDER * F1J L-CAB GIGASPACE, 2.50 M, FLAT FLOOR * F1R L-CAB * F2A FLOOR VERSION, FLAT FLOOR * F2H CAB WIDTH 2.50 M * F2P CAB, 765 MM MOUNTING HEIGHT * F2X GIGASPACE * F4H CAB REAR WALL, WITHOUT WINDOW * F3C CAB SUSPENSION, COMFORT, AIR SUSPENDED * F3W CAB TILTING DEVICE, MECHANICAL-HYDRAULIC * F6D TINTED WINDSCREEN WITH SUN STRIP * F8V LIGHT SENSOR * F8W RAIN SENSOR * D8M ELECTRIC SLIDING/TILTING SUNROOF, GLASS DESIGN * F4X EXTERNAL STORAGE BOX, LEFT * F4Y EXTERNAL STORAGE BOX,

Condition: new, Part suitable for: trucks General condition: very good Technical condition: very good Optical condition: very good Hedpfx Aeuxahkodxsfl

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design Hodpfsy Dmvmex Adxefl * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain