Used Bellows Shut-Off Valve for sale (13,980)

Condition: used, Transport container with galvanized steel frame Nominal capacity: approx. 1,000 l Overall height: approx. 1,550 mm Length: approx. 1,100 mm Width: approx. 950 mm Weight: 215 kg Lodpjztpz Uefx Af Ssrt Material: Material: V4A 1.4404 Manhole DN 400 Bottom: Outlet DN 50 extending towards the front with shut-off valve Otherwise, as shown in the pictures Manufacturer: BLEFA Note: The containers were last used for storing chemical and pharmaceutical products.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; Ledpfx Asf Ar Exjf Ssrt - 500, 800 or 1000 l water tank;

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP Lodpfex Hdq Tjx Af Ssrt - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery - 4 units Brewhouse | Shandong | 20-25HL | 2019 - 1x mash tun Lredpfx Afjyb N N As Set - 1x lauter tun - 1x boiling or wort tun - 1x whirlpool - Manual shut-off valves - Cooling of fermentation tanks is automated - Malt mill | Shandong | 2019 - Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/ h - Oil-fired, but can also be operated with gas by replacing the burner - Wort cooler, 2-stage | Shandong | 2019 - 2x cooling unit (glycol) | 2019 - 2x 28kW - Glycol tank - Hot water tank - 6x Fermentation tanks | 2760l | 2019 - 3 bar, insulated with jacket cooling, CIP capable - 12x Storage tank | 2760l | 2019 - 3 bar, no cooling, were in a separate cold room - Reverse osmosis - Compressor | JAN | 585l/ min | 2020 - KEG filling - 1x drum washer with automatic caustic refill and steam-heated - 1x keg filler - Up to 70 barrels/ h, - Fitting: Type S, basket fitting, - Siemens S7 - Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc.

Year of construction: 2000, condition: used, functionality: fully functional, Aluminum storage silo with a sturdy base ring Technical data / Dimensions Available quantity: 4 Volume: approx. 174,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 4,200 mm External diameter: approx. 4,260 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 3,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Notes: A new access ladder for the silo system can be offered as an option. Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material AlMg3 / AlSi Equipment Base design: Foot ring / base ring Lsdpfx Asy Ufigef Sjrt Quantity: 1 Mounting: fixed Top bottom type: Conical bottom Bottom type: Cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 1 x connection flange for level measurement 1 x threaded socket for max. sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 (insulated) ending in a TW connection 1 x welded adapter for empty message Bottom: The silos end at the bottom in a 90° cone with a flange DN 200 and an emergency shut-off valve. Fittings: The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its proper functioning. Documentation Drawing

Condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 5 x 125 m³ aluminum storage silo with a wide base (plastic granulate silo) Technical data / Dimensions Available quantity: 5 Volume: approx. 125,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Ground clearance: approx. 500 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material: AlMg3 / AlSi Equipment Base design: base ring/wide base Quantity: 1 Mounting: fixed Bottom type, top: conical bottom Bottom type, bottom: cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 with safety grid 1 x flange DN 100 (filling line) 1 x flange DN 300 (level measurement) Ledpfx Aoznn Ntof Sert 1 x threaded socket for Max sensor 1 x flange DN 100 (filling) 1 x vent DN 200 with hood Shell: 1 x service access door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100, ending in a TW connection 1 x threaded socket 1 1/2" for empty indicator Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off valve and suction box. Fittings available Notes: A matching access ladder (two-section) can be optionally purchased (additional cost: €1,500 plus VAT). The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its perfect functioning.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Lodoywuihjpfx Af Sort Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: used, Year of construction: 2025, _____Year of manufacture: 2025 Engine capacity: 1500 cc Tank capacity: 14,000 liters Pump capacity: 4000 liters Suction inlet: right/left Suction arm: right Tires: 750/60R 30.5 Hydraulic drawbar adjustment Front cutter Electric forced steering Automatic filling system with shut-off function Signo Smart control system Bomech with two cutters 6-inch suction arm with 8-inch ball Half-width control via slide valve Lrsdpfezxvnljx Af Set Bomech spreading shoe distributor Speedy Small 12 M (optional 15 meters) Vehicle not registered Like new Storage location: Getränkemarkt-Platz

Condition: used, maximum load weight: 27,650 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2021, loading space volume: 32 m³, Year of construction: 2021, Equipment: ABS, Stock no. 4912 Insulation slightly damaged, tank in good condition! 32,000 Liter Kässbohrer V2A Bitumen Tank Semi-Trailer / Insulated / Accident Damage / Single Owner - Manufacturer: Kässbohrer - Model: STS 32/1 - 10/24 - First registration: 04/2021 - Capacity: 32,000 liters in 1 compartment - Gross weight: 34,000 kg - Unladen weight (per registration papers): 6,350 kg - Payload: 27,650 kg - Axles: 3 x BPW with 1st axle liftable / disc brakes - Suspension: Air suspension with raise and lower function - Tyres: 385/65 R 22.5 approx. 50% on aluminium rims Lodpfx Ajyawklof Ssrt - Colour: Chassis carmine red, tank body white aluminium - EBS Wabco - Roadworthiness certificate (TÜV): valid until 03/2026 - Tank inspection: valid until 04/2027 - Leak test: valid until 04/2030 - ADR certificate valid until 01/04/2026 - Tank code: L4BH - ADR code: FL / AT - Pressure vessel 2 bar - Operating temperature: up to +250°C - 1 dome cover at the front - Access ladder front right with walkway left and right - 4 baffle walls - 1 x thermometer rear right - DN 100 bottom valve at rear, manual operation right side - DN 100 shut-off valve rear right, with handwheel - 3-inch discharge line at rear - 1/2 inch sampling tap at rear - Fire extinguisher box rear right and left (without extinguishers) - Grounding - Open hose tray on right side - LED reversing lights - LED work lamps - Toolbox rear left - Full load support legs - Individual mudguards - Wabco AirSuspension control box - Single owner German trailer!! German documents!! 1st owner!! Insulation slightly damaged, tank in good condition! Disclaimer regarding potential listing errors: Despite careful creation of the listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to verify details or clarify any questions.

Condition: ready for operation (used), Year of construction: 2008, A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height: 87mm, magazine length: 1500mm, max. blister width with double-stack insertion: 55mm, max. magazine capacity: approx. 1200cartons, max. leaflet dimensions X/Y: 210mm/600mm, min. leaflet dimensions X/Y: 100mm/100mm, min. carton dimensions X/Y/Z: 30mm/15mm/63mm, max. carton dimensions X/Y/Z: 115mm/90mm/150mm, weight: approx. 3200kg. The rear reject flap of the C 2155 is no longer present. The safety shut-off valve of the UPS 4 is defective, and the touchscreen monitor responds too slowly. Overall line dimensions X/Y/Z: approx. 14000mm/5500mm/2750mm, weight: approx. 10200kg, control system: PC/PLC. Documentation available. An on-site inspection is possible. Expected to be available from the end of August 2026. Ledpszbl Nlefx Af Sjrt

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit used for cooling screw compressors. Pump unit with machine frame consisting of: 3 x Type: CRN32-1-1 A-F-G-V-HQQV / 30 m³/h 10.7 meters, 1.5 kW 6 x manual stainless steel shut-off valves 1 x pressure relief valve 1 x Rosemount GP6 S22 C1 pressure transmitter 6 x stainless steel pressure gauges Cl.1 2 x Gerodur plastic pipes with elbow fittings, 140 x 8.3 mm 1 x mounting frame Heat exchanger unit with frame consisting of: 2 x bolted plate heat exchangers Alfa Laval Type: M6-MFG Volume: 11.2 liters Max. operating pressure: 10 bar Max. temperature: 80°C 6 x manual intermediate flange shut-off valves, stainless steel 2 x electric valves with Auma actuators with Harting connectors 2 x electric KSB BOA valves with Auma SAR 07.1-F10 actuators and MATIC heads with Harting connectors 2 x PT 100 thermometers 4 x analog thermometers stainless steel Cl.1 1 x Rosemount GP6 S22 C1 pressure transmitter 2 x PE welded pipe with bends 110x6.5 mm Gerodur 2 x PE pipe with bends 90x5.4 mm Gerodur 1 x expansion vessel 1 x mounting rack Lsdpfx Aoyrxuvef Sjrt

Condition: new, Year of construction: 2022, _____Standard equipment: - Hot water steam generator, 12 Volt, 13 l/min, digital - Frame 1.90 m x 1.26 m - Water tank 800 l, horizontal, black RAL 9017 - Battery compartment with cover - Set: AGM battery 12V, 260Ah with 25A charger, 2 pcs. - SB 50 gray plug, 2 pcs. Lsdpfxjh U I Rvo Af Sjrt - Automatic hose reel, stainless steel for 15 m - 15 m hot water hose with protective cover and abrasion protection - Lance holder, 4-way, angled - Hand lance set, 2-piece, pistol with nozzles - Cylinder lance and quick coupling - Support leg with swivel castors - Support leg with steering castors - Remote control preparation incl. separation point - L x W x H: 190 x 128 x 100 cm - Unladen weight: approx. 460 kg Optional equipment: - Digital remote control for hot water steam generator / forward / backward / up / down with 5 m cable - Hydraulic high-pressure pump, water flow rate 15 l/min at 250 bar without hoses - Hydraulic hose set for high-pressure pump - High-pressure lance with 15° nozzle -05 - Hydraulic dispensing arm pump 169 l/min without hoses - Hydraulic hose set for dispensing pump including complete mounting kit - Hand lance with dispensing head with Geka connection and shut-off valve D 15 cm - Tie-down point for tensioning strap to be inserted into a frame tube - Location: 54595 Prüm

Condition: used, mileage: 622,323 km, power: 316 kW (429.64 HP), first registration: 07/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Lsdpfxezy Twms Af Sert Special equipment: Front axle load 9.0 t, work lights (2) on the cab roof, exterior mirrors wide-angle and electrically adjustable and heated, left, operating hour counter, curb mirror right electrically adjustable and heated, Comfortshift gearshift, cab: tilting mechanism electro-hydraulic, flame start system, fuel filter heated, fuel tank: 400 L, emergency shut-off switch battery, rotating beacon (2), seat cover / upholstery: comfort quality, sun visor exterior, socket cab 12V and 24V, control module for external data exchange, shock absorbers front axle reinforced, underrun protection front, viscous fan, front axle VOK-09 with increased offset Additional equipment: Axle configuration: 6x2, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and electrically adjustable and heated, right, battery 175 Ah, battery box, differential lock rear axle, EDC engine control, electronic braking system MAN-Brakematic, EURO 4 engine, cab: M (medium length), driver's seat comfort, tachograph, suspension: leaf spring / air, power windows, generator 100 A, speed limiter 80 / 85 km/h, transmission 12-speed - type: ZF 12 AS, Tipmatic, rear axle HY-1350, interior filter: pollen filter, body / structure: chassis, rocker arm - brake EVB, steering column (steering wheel) adjustable, air compressor 1-cylinder, engine 10.5 L - 316 kW Diesel, tag axle NO-08, liftable, radio preparation 24V, disc brake rear axle, disc brake front axle, protection device side, stabilizer front axle, bumper in plastic design, underrun protection rear, immobilizer electronic, central locking, permissible total weight 26.0 t * Man Tga 26.430 6x2 * Rear lift + tag axle * Roll-off tipper * Manual transmission * Mileage: 622,323 km * First registration: 18.07.2007

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany Lredpfxsyrd U Uo Af Sjt

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 Lrodpfx Ajy N Dagjf Sst - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Ledpfjxc Ni Rjx Af Sjrt

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) Ledpfxjyc Nzuo Af Sort • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Lrsdpfx Afoyl Izxo Sot Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Lodpfjyl It Iex Af Sert Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: used, Year of construction: 2013, operating hours: 4,657 h, Equipment: all wheel drive, * Enclosed cab * Load sensing shut-off * Rear-view camera * Air conditioning * CD radio ----Vehicle number 12423 ----Errors and prior sale excepted Ledpezxaxbsfx Af Sort

Condition: excellent (used), Weiss Here, we offer a Weiss emission test chamber. Mini - SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Lsdpfszd Slksx Af Sert Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation; scope of supply: connecting flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3-phase + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ + 18-45 Condition: used Sale from our location Scope of supply: (Only the Weiss emission test chamber WT 5.1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure Ljdsxvca Aspfx Af Sort The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: excellent (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 220 cm³, plate length: 760 mm, plate height: 760 mm, total length: 67,500 mm, total width: 2,000 mm, total height: 2,420 mm, overall weight: 8,500 kg, Equipment: documentation/manual, ENGEL e-motion 440-160 Stock No.: 503676 Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum installation height: 375 mm Maximum installation height: 600 mm Maximum platen spacing: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Displacement: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 min Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500KG Equipment Screen text in German Screen text in English CEE socket 32A Hydraulic core pull, 2x Hydraulic core pull unit Air valve 1x Lrodpfxez A S I Te Af Set Machine with water manifold Machine without material hopper Machine without suction conveying system Pneumatically operated needle shut-off nozzle Leveling elements EUROMAP 63 interface EUROMAP 67 Handling interface Interface for ejector plate locking Schuko socket 10A

Condition: used, power: 10 kW (13.60 HP), input voltage: 230 V, total length: 1,150 mm, total width: 800 mm, total height: 670 mm, overall weight: 85 kg, fuel type: electric, - Dimensions (L x W x H): 800x1150x670mm - Brand: Bake OFF ITALIANA Ledpfx Aszyulxef Sjrt - Serial number: 01980063 - Model: MISTRAL 5T - Temperature: 270°C - Baking trays: 400x800, 400x600 - Tray spacing: 90 mm - Power: 10 kW - Voltage: 230V - Weight: 85 kg Features of the 5-tray electric convection oven Bake Off Mistral 5T - BakeAIR multi-fan system for uniform heat distribution. - Double-pane, low-emissivity glass for superior insulation. - LED interior lighting for perfect visibility. - High-performance thermal insulation for maximum energy efficiency. - BakeCLEAN automatic washing system for easy maintenance. - Blue LED lighting to check the cleanliness of the baking chamber. - Five fan speeds and semi-static baking for precise results. - Five baking methods for exceptional versatility. - Automatic opening of the BakeDRY flue for precise control. - Program block with password for increased security. - Baking chamber with rounded corners for simplified cleaning. - CE certification for compliance with European standards. - Automatic dry/steam control in the chamber for perfect dishes. - Automatic control of the baking level and batch loading. - Steam control in percentage with BakeSTEAM. - Multi-timer function for multiple and mixed baking cycles without worry. - Storage, display, and export of baking data (HACCP). - Operating modes with customized, manual, or pre-defined programs. - EAC certification for compliance with Eurasian standards. - Modular design for optimal adaptability. - Automatic preheating for quick baking. - Delayed start programming for flexible time management. - Delayed baking programming for increased convenience. - Pre-loaded cookbook available online for culinary inspiration. - Automatic detection and error reporting for peace of mind. - Safety rinse for worry-free maintenance. - Stackable design to save space. - Ventilation with reversing, speed control, and motor brake for optimal performance. - Inner glass that can be opened for easy cleaning.

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles Lrodszfyk Rjpfx Af Set 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.