Used Bayer Diagnostics 4715 for sale (481)

Condition: used, mileage: 279,975 km, power: 130 kW (176.75 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 5,330 kg, maximum load weight: 2,160 kg, overall weight: 7,490 kg, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 4,220 mm, color: black, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,360 mm, Equipment: ABS, cabin, immobilizer system, low noise, onboard computer, tail-lift, trailer coupling, Vehicle location: Bovenden, Kz. house, swing seat, electric mirror, switch 6, ABS (anti-lock braking system), frame cladding, leaf-air suspension, AHK air + light, low-noise G1, lashing rails, U-protection, roof hatch, tail lift aluminum, upright, engine start-stop, environmental badge green Wheelbase: 4220 mm Body: Spier box body with 1t tail lift MBB 1000K 3.5t front axle, rear axle H2 6.2t/7.2t disc wheel 325, Telligent brake system with ABS, disc brakes on front and rear axle, rear axle stabilizer, pre-installation for toll collection, distributor cockpit, pollen filter, on-board diagnostics 2, tank capacity: 125l, engine start/stop system. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfx Aovhkbvsilocn - .

Condition: used, mileage: 98,265 km, power: 210 kW (285.52 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 15,150 kg, maximum load weight: 10,850 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic, lifting+lowering, rotating beacon, air-suspended, low-noise G1, last axle hydr. steered, side alu driving protection, roof hatch, environmental badge green Dodevhkvmopfx Ailocn Wheelbase: 3900 mm Body: Waste collection body HS Schörling OL21W (without body) EEV engine, front axle air-sprung, 7.5 t front axle, rear axle H7 13 t disk wheel 300, axle load measuring device, Telligent trailing axle hydraulically steered, ABS, ASR, stop brake comfort version, disc brakes on front and rear axle, front underride guard, additional stabilizer rear/trailing axle, lifting/lowering device, starting aid, parameterizable special module (PSM), on-board diagnostics 2, Allison automatic transmission 3000 P, automatic daytime running lights, engine brake can be switched on/off with constant throttle, lower radiator guard, rear engine output torque 600 Nm. Used body available for approx. 7000,-€ net. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 89,000 km, power: 230 kW (312.71 HP), first registration: 12/1995, fuel type: diesel, empty load weight: 11,350 kg, maximum load weight: 14,650 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,100 mm, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro1, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, differential lock, power assisted steering, seat heater, Vehicle location: Bovenden, mtl. house, 1x comfort seat, seat heating, rear window, e-window right, compressed air horn, ABS (anti-lock braking system), power take-off, exhaust raised, automatic, central lubrication system, differential lock, driving lights, work lights, rotating beacon, leaf suspension, air+light connections for trailer hitch, winter service equipment, aluminum side guards Wheelbase: 4100 mm Body: Hiab Multilift roll-off system with articulated arm for container 5.5 m ABS, brake pad wear indicator, front springs stronger level I, rear axle 13 t crown wheel 300, 9 t front axle, differential lock rear axle, reinforced steering, additional sound insulation, flame system, central lubrication system, Flexible Diagnostic System (FDS), rear engine output for hydraulic pump. Djdpjvhmwgjfx Ailocn All information without guarantee as the vehicle is currently being delivered! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); Dcjdpevtn Hmefx Ailjn - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: used, mileage: 825,580 km, power: 330 kW (448.67 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 9,050 kg, maximum load weight: 16,950 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, Lg. House, 2x comfort seat, 1x recliner, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, electric roof, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, front exhaust, differential lock, fog lights, leaf-,air, last axle liftable, air+light trailer hitch, aluminum tank, low-noise G1, U-protection, green environmental sticker Wheelbase: 4900 mm Body: Frame length approx. 7.5m 7.5t front axle, rear axle disc wheel 440 hypoid 13t, trailing axle 7.5t liftable, electronic brake system with ABS and ASR, disc brakes on front and rear axle, condensation water monitoring for compressed air system, front axle stabilizer, additional rear/trailing axle stabilizer, aluminium front underride guard, comfort bed underneath, Additional hot-water heating, Electric lifting roof, Pre-fitting for wide comfort bed, Communication interface, Start-off aid, StreamSpace, Comfort locking system, Economy drive program, Mercedes PowerShift 3, Pre-fitting for toll collection, On-board diagnostics, Bi-xenon headlights, Engine brake, Transmission oil cooling, ESP, Tank capacity: 630l. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dodjvhhwzspfx Ailocn

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ Dcodpeflpi Njfx Ailen High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 1,900 mm, total length: 3,720 mm, total height: 1,990 mm, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, overall weight: 1,800 kg, rotational speed (max.): 2,100 rpm, high-pressure hose length: 50,000 mm, water tank capacity: 300 l, empty load weight: 1,800 kg, temperature: 95 °C, fuel tank capacity: 100 l, type of cooling: water, hose length: 25,000 mm, power: 45 kW (61.18 HP), water pressure: 500 bar, pump capacity: 40 l/min, Equipment: type plate available, The HDT60, in its hot water trailer version, covers a pressure range of 400 to 500 bar with a flow rate of 33 to 40 l/min. The pump is driven by a water-cooled 4-cylinder turbo diesel engine. To ensure longevity and corrosion resistance, the frame inside the trailer, which is made of hot-dip galvanized steel, is one of the features. Additionally, the frame is primed and then painted, which creates a very attractive appearance. The frame can be easily pulled out for maintenance. The CD60, in its trailer version, can be configured with numerous options, such as a hot water boiler, an electrically operated hose reel, a remote control, etc. However, it is not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate HDT60-400 400 bar 40 lpm HDT60-500 500 bar 33 lpm General specifications: ----- Drive engine: Kioti turbo diesel 4-cylinder, water-cooled, Stage V (Tier 0 without AdBlue available on request) Power of drive engine: 45 kW Speed of drive engine: 2100 rpm Fuel tank: 100 L Max. fuel consumption: 6.8 L/h Water tank: 300 L Burner output: 2x 105 kW Max. water temperature: 95°C Dimensions and dry weight: 3720 x 1900 x 1990 mm (1,800 kg) • Automatic pressure detection for easy start-up and operation. • Automatic idling for higher fuel savings. Dodpfjhgbkuox Ailscn • Overpressure detection for increased safety and pump protection. Standard accessories included in the scope of supply of each machine: • 50 m high-pressure hose & 25 m low-pressure hose • HD gun with shut-off valve • Double lance with side handle • Nozzle holder with nozzle(s) • Telematics for remote monitoring. Remote monitoring via telematics. Optional accessories: • High-pressure hoses in special lengths • Special hose connections • Pneumatically operated pressure relief valve "Tumble Box". • Selection of various spray guns: manual, electric and hydraulic. • Surface cleaner • Spare parts kits • Wireless control and diagnostics with hand-held transmitter • Ethernet API for control and diagnostics. Alternatively available as a skid or/and cold water version.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 40, controller manufacturer: Hurco, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, overall weight: 10,900 kg, table length: 1,676 mm, table width: 660 mm, controller model: MAX5, torque: 118 Nm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, number of spindles: 1, rapid traverse Z-axis: 2 m/min, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 1,360 kg, tool diameter: 75 mm, tool length: 249 mm, tool weight: 7 g, Equipment: CE marking, chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg Djdpfx Asuyt U Toilocn 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Dcodpjuwkr Djfx Ailsn Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides Dcodpfx Asy D Hp Tsiljn • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Dodpfxewd Irvs Ailocn Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Machining Capabilities: - Operations: Dcjdpfx Aouru I Reilsn - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Key Features: - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 13,572 h, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar Dedpfx Aieyaz Emslocn • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. Dcjdpfxsya Da Ho Ailsn The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Dedpfxext Evne Ailscn Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Dedpfx Aisxrcq Hjljcn Parameters: Closing force: 30kN Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here.

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger Dcjdex H A I Rjpfx Ailsn • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: used, mileage: 641,180 km, power: 350 kW (475.87 HP), first registration: 08/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 2x reclining seats, heated seats, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, electric glass roof, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, automatic transmission, differential lock, fog lights, high beams, leaf air suspension, air-light hydraulic tow bar, aluminum rims, roof hatch, green environmental sticker Wheelbase: 3300 mm, 7.5t front axle, rear axle H7 13t crown gear 233, performance-optimized Voith retarder, Telligent braking system with ABS and ASR, ABS deactivatable, disc brakes with full protection on front and rear axles, steel bumper, electric sliding/tilting glass roof, toll collection preparation, headlight cleaning system, Mercedes Illuminated star, rain sensor, comfort cockpit, cool box, ambient interior lighting, Mercedes PowerShift 2, additional thermal insulation, Webasto Air Top 2000 auxiliary warm air heater, reversing alarm, on-board diagnostics 2, bi-xenon headlights, protective plate under the radiator and engine, standard driver pack, comfort bed (lower and upper), auxiliary drive (MB 131-2c) countershaft. Dcsdpfxjx E Thrs Ailjn Aluminum rims only on both rear axles! VIN: WDB9322411L427532. ACCESSORIES INFORMATION IS SUBJECT TO PERFORMANCE. Subject to change, prior sale, and errors! - .

Condition: new, Siemens SIMODRIVE Monitoring Module 6SN1112-1AC01-0AA1 Manufacturer: Siemens Condition: New, original packaging opened Type: Monitoring module Series: SIMODRIVE 611 Article number: 6SN1112-1AC01-0AA1 Product family: SIMODRIVE 611 Module type: Monitoring and diagnostics module Mounting type: Control cabinet installation Djdpfx Aiszcw R Delscn Application area: CNC machine tools and industrial drive systems Compatibility: Siemens SIMODRIVE 611 drive systems Use: Monitoring and diagnostics of drive systems Design: Plug-in module for SIMODRIVE 611

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,750 h, axle configuration: 2 axles, fuel type: diesel, first registration: 12/2013, color: black, overall weight: 1,400 kg, gearing type: hydrostat, suspension: steel, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, hydraulics, parking heater, Authorized SUBARU dealer offers for sale a professional, multifunctional municipal vehicle Kärcher MIC C 34, year 2013 – in use since 2015. This is a reliable and economical machine designed for year-round maintenance of urban areas, sidewalks, parks, and residential complexes. Thanks to its compact dimensions, 4x4 drive, and articulated frame, it delivers excellent maneuverability and high work efficiency. Additionally, this machine is offered with a robust tipping trailer included, featuring rear unloading functionality. The machine comes from its first owner in Denmark, who used it for farm transport. Therefore, no attachments are included, though we can source them upon request. The price includes a complete set of documents for registration. We offer all forms of payment: leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the vehicle away directly from our dealership. We also deliver paid vehicles—cars and trucks—directly to your chosen address anywhere in Europe. For more information about our services, please contact our sales team. Dcsdpfx Aijy Dtpysljn Technical specifications: Brand and model: Kärcher MIC C 34 Engine: Diesel, turbocharged Power: 25 kW / 34 hp Drive: 4x4 (all-wheel drive) Maximum speed: 20 km/h Gradeability: up to 25% Fuel tank: 37 l Dimensions and weight: Length: 2300 mm Width: 1090 mm Height: 1970 mm Unladen weight: approx. 1400 kg Gross vehicle weight: 1750 kg Equipment and advantages: - All-season cabin with heating and air conditioning - Hydraulic drive for attachments - Articulated steering for exceptional maneuverability - Comfortable operator’s seat - Road and warning lighting - Quick-change tool system - Low fuel consumption and cost-effective operation Applications: Ideal machine for year-round work: - Sweeping streets and sidewalks - Snow and ice removal - Spreading salt and sand - Mowing green areas - Washing surfaces and maintaining public spaces Technical condition: The machine is in good technical condition, ready for work. Regularly serviced and well maintained. Fully refurbished and preserved. The listed price is net and applies for export and companies. Significant discounts available for private customers – please contact us directly by phone to get your best price. After price negotiations, for serious buyers, we can provide detailed videos, computer diagnostics, or paint thickness measurements to facilitate safe remote purchases.

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, We offer for sale a powerful Stäubli TX200 industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Technical Specifications: Nominal load capacity: 100 kg Reach between axis 1 and 6: 2194 mm Dcedpfonncalex Ailon Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments.. For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. Dsdjfirx Topfx Ailecn We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, functionality: fully functional, Year of construction: 2020, table length: 2,270 mm, table width: 1,600 mm, working length: 2,270 mm, working width: 1,600 mm, travel distance X-axis: 2,270 mm, travel distance Y-axis: 1,600 mm, cutting speed: 60,000 mm/min, positioning accuracy: 0.005 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 3,990 mm, total width: 2,340 mm, total height: 1,600 mm, Equipment: cooling unit, dust extraction, fume extraction, We offer this used eurolaser LCS G3 XL-1600 laser cutting machine, year of manufacture 2020. System type: LCS G3 XL-1600 Serial number: 1308S8364P Year of manufacture: 2020 - Voltage: 400V/50Hz - Operating temperature: +10° to 32°C - Working area: 2,270 x 1,600 mm - Maximum material width: 2,350 mm, unlimited length - Cutting speed: 1–1000 mm/s - Axial acceleration up to 9.3 m/s² - Measuring system accuracy: 0.005 mm - Servo-controlled DC motors - Dimensions: 3990 x 2340 x 1600 mm - Hardware interface: RS 232C - Software: HPGL - LCD control panel - Two lenses – 5" and 7.5" - Laser Scout Connect (LS-CON) cutting software: Includes post-processor for laser system control and LaserScout PLANNER module for cutting time calculation. - Watchdog (E-WD): Monitoring and remote diagnostics of key system functions in real time. Djdpfsyu N H Uex Ailjcn - LaserScout POSITION+ (LS-POS+): POSITION is a software package for working with a camera to recognize reference marks. The package also includes a camera and the Planner for cutting time calculation. - Cooling unit (CU-450): Water-to-air closed-loop cooling unit Ambient temperature: +10° to +32°C Voltage: 400V, 3~, 50Hz - Top extraction (EU-015-1): 1 x 1.5 kW vacuum motor Automatic voltage protection Voltage: 400V, 3~, 50Hz - Extraction unit (EU-030-2): 2 x 3.0 kW vacuum motors Automatic voltage protection Voltage: 400V, 3~, 50Hz - Raster cutting table (RP-XL32): Black anodized perforated table - PC, 21” monitor If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Dedpfx Aiei Ri Hgolocn Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Dodpfx Aiezd Uvlelecn Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference