Used Arburg 320C 500-170 Golden Edition for sale (18,576)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator Hjdpfx Asyg I Egjndjnr • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h Hsdpfxeydnigo Andjnr • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: 11200 Hedpfx Aow Hx Uysndenr

Condition: excellent (used), Year of construction: 2003, clamping force: 1,500 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 470C-1500-350(166) General information Product Code: 166 Availability: In Stock Year of production: 2003 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,500 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 470x470 mm Platen size: 650x650 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Hnedpevt S Egjfx Andor Power: 40,2 kW Workinghours: 83824 h Weight: 4410 kg Dimensions: 4,5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2008, operating hours: 45,343 h, clamping force: 1,500 kN, screw diameter: 35 mm, injection pressure: 2,000 bar, injection weight: 141 g, Arburg 520S-1500-400 (217) General information Product Code: (217) Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 141 g Clamping Force: 1,500 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 520 x 520 mm Platen size: 688 x 688 mm Mould height min.: 250 mm Type of controls: Selogica Hnjdpfx Anovt Sixjder Language: English,German Power: 33,9 kW Workinghours: 45343 h Weight: 6490 kg Dimensions: 4,9 x 1,7 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Hjdow E Itispfx Andonr For more information or contact options, please visit our website.

Condition: used, Year of construction: 2003, operating hours: 71,732 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2003 Hours: 71.732 h Valve gate: Pneumatic Screw: Ø 25 mm Clamping force: 180 kN Core pull Internal pressure transducer Hedpfxju Hqg Hs Andonr On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2022, condition: new, functionality: fully functional, The machine is NEW. Price €240,000 gross. Hnodowdtd Djpfx Andsr

Condition: ready for operation (used), Mattke MTR5000-170/25 servo controller, serial number: 4150038299. This servo controller has been fully overhauled by a specialized workshop, is used, in good condition, and is 100% functional. Scope of delivery as shown in the photos. Hodpfxei Eb A Ue Andonr

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr Hnedpfx Aehqqnzendjr MADE IN AUSTRIA

Condition: used, mileage: 860,523 km, power: 368 kW (500.34 HP), first registration: 04/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.500 4x2 BLS | XXL | Lion Pro Edition | Retarder | Auxiliary Air Conditioning VIN: M787626 -- Bearing shells were replaced at MAN at 799,246 km on 01/16/2026 -- CHASSIS / COMPONENTS * 4x2 * Leaf/air suspension * Wheelbase: 3,600 mm * ABS * Differential lock * 2-line air connection * ABS connection * 15-pin electrical connection * Full spoiler * Air horns * 2 diesel tanks: 490 l + 370 l * 1 AdBlue tank BODY * Semi-trailer tractor TIRES * Axle 1: 385/55 R22.5, remaining tread approx. 20 % / 20 % * Axle 2: 315/70 R22.5, remaining tread approx. 90 % / 90 % ENGINE / GEARBOX * 368 kW (500 hp) * 12,419 cm³ displacement * Euro VI C * Automatic transmission * Retarder * Cruise control CABIN / DRIVER'S CAB * XXL cab * Lion Pro Edition * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * Leather seats * Seat heating * 2 bunks * Refrigerator * Navigation * Radio * AUX, USB, Bluetooth * Hands-free system * Adaptive cruise control * Lane departure warning system * Xenon headlights WEIGHTS * Permissible total weight: 18,000 kg * Unladen weight: 8,063 kg * Payload: 9,937 kg OTHER * Mileage: 860,523 km * German vehicle * TÜV (technical inspection): 01/2027 * HU (main inspection): 07/2027 * Tachograph test valid until 05/12/2027 New TÜV/HU as well as weight reductions or increases are possible upon request. Hsdpfxszn Dy Uo Andsnr We won't leave you alone even after the purchase: We will help you obtain export or short-term registration plates. A transfer of your vehicle within Germany is also possible. Just contact us – we will be happy to assist you! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That's why we support you personally and reliably – from the first contact to the handover of your vehicle. Be convinced yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We support you in the organization of special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transfer If desired, we will organize a transfer of your vehicle within Germany.

Condition: used, Year of construction: 2008, Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 Hnodpfx Aneyi Inasder RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Hnedpfoytf Acex Andor We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 635 kg, maximum load weight: 2,835 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 306 170 3500 2 – Machine Transporter NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 40cm Total weight: 3500kg Payload: 2825kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side panels 15mm thick, non-slip and robust screen-printed wood floor Automatic jockey wheel with 400kg support load 12 lashing eyes with 1000kg tensile force, also on the front Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector Side marker lights at the front Hsdpoghpb Defx Andjnr Rear lights with reversing light, NSL (number plate light), and triangular reflectors Steel ramps with eccentric locking system, 2800kg capacity Adjustable rear supports Walkable steel fenders OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Superstructure and fenders painted to customer specifications -Black Edition: superstructure and fenders painted black -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Force One diamond plate floor and 4x diamond plate steps -Grille between ramps -Shovel rack -Height-adjustable drawbar with DIN towing eye -Rear bulkhead Further accessories available on request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories that incur additional costs. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories, including trailers from various manufacturers. You can find a wide range of rental trailers with us. Visit us online or come directly!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-sided tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 75cm Total weight: 3500kg Payload: 2702kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg lashing force Reinforced 13" C-type tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Electric tipping control with connector for charging the 12V battery Electric limitation of the tipping angle to the side U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side boards (price reduction) - Black Edition (Powder-coated side boards and rims in black) - Integrated ramps 2800kg - 35cm side boards - Charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work when the vehicle is tilted - Folding crank rear supports - Complete LED lighting - Anti-theft device - Net with fine or coarse mesh - H-frame Hnodoghpc Tspfx Andsr - Leaf grid in various heights, also closed - Extension side boards 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories on request! Plus freight to Gera and vehicle registration document 250 € net Pictures are for illustration purposes only and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by!

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Hedjyg Emzjpfx Andonr Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3.500 kg - Unladen weight: 800 kg - Payload: 2.700 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hnodpfx Aju Htzasndjr

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines in the CD25 series are compact high-pressure cleaners, with pressures ranging from 170 to 500 bar and a flow rate of 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for long-lasting durability and corrosion resistance. The powder coating ensures a very attractive appearance. The machine has very compact dimensions of 1200mm x 800mm, which corresponds to the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eye. This enables very easy transport. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General specifications: ----- Max. pump speed: 1750 rpm Drive engine: Kubota Diesel 3 cyl., water-cooled Drive engine power: 18.6 kW Hnsdpfx Anehgbfhsdjr Drive engine speed: 3000 rpm Tank: 28 L Max. fuel consumption: 5.7 L/h Noise level (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 45 l/min. The standard version has solid rubber tires with a parking brake at the rear and swivel casters at the front. The “Slim version” has a narrower design and also narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal components with all-round side frames made of stainless steel. The standard model has dimensions of 1060 x 760 mm. The "Slim" version has a very compact size of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others, see datasheet and available upon request. General specifications: ----- Power of the drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Hnodpfxehf Nbds Andsr Weight: 175 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 46 l/min. The machine features pneumatic tires with a parking brake on the rear axle and steering rollers on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with continuous side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CP22-170 170 bar 46 lpm CP22-220 220 bar 36 lpm CP22-280 280 bar 27 lpm CP22-350 350 bar 23 lpm CP22-500 500 bar 16 lpm General specifications: ----- Drive motor: 2-cylinder, 4-stroke gasoline engine, electric start Hjdpfx Anohga U Aedsnr Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with manual throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control Hedpey Rhzwsfx Andjnr - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm Hnjdpfxjzur Hio Andsr • Mobile, easy to move • Includes a receiving table • No special operator training required 230V power supply Weight: 550 kg

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Hnsdpfx Aszur Efender Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot Hsdezkfh Sspfx Andsnr The machine is in very good condition and is operational.

Condition: excellent (used), CATALOG NUMBER 7614 Hnsdpfoza Eipox Andsr Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)