Used Acadian Mpc 6 Multi Purpose Cooker for sale (52,382)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Iiodpfx Akoyug R Rjxsa Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors Isdpfx Akjyug Hxsxjia • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 2010, color: white, loading space volume: 2 m³, Washing body: + CMAR + Type LC860 + Year of manufacture 2010 + Fits Multicar Tremo X56 + Water tank 2000 l + Support legs + Hose reel + Telescopic washing bar with side spray nozzles Iijdpfx Aeyr Rqvokxja + Medium and high pressure pump + Without control unit (cab rear wall) Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and prior sale excepted!

Condition: used, mileage: 5,300 km, power: 75 kW (101.97 HP), first registration: 02/2005, overall weight: 4,800 kg, fuel type: diesel, color: yellow, gearing type: mechanical, number of seats: 2, Equipment: all wheel drive, Multicar M26.5 Profiline Vehicle can be downrated to 3.5T. * 2.8L 78KW 107 HP Iveco engine * Short wheelbase * All-wheel drive * Crawler gear * Tipper * Municipal hydraulics * Tow ball, 3500kg * Load upgrade package to 4800kg * Downrating to 3500kg possible * Inspection / service new * TÜV / emissions test new Iijdpsyqcgaefx Akxoa * Price incl. VAT.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Automatic Capsule Loader Mod. MS1 and Capsule Filling Machine Mod. MS6 AUT Automatic filling machine Mod. MS 6 AUT for hard gelatin capsules with 300 capsule holders for production. With the automatic loader MS 1, up to 16,000 capsules per hour can be produced. The machine is equipped with a capsule format that allows selection between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5, and DB Caps. can also be supplied. Technical Data Iijdpfoykt Rpex Akxja Machine dimensions MS6 AUT: 500 x 400 x 700 mm Machine dimensions MS1: 410 x 700 x 650 mm Net machine weight MS6 AUT: 55 kg Net machine weight MS1: 115 kg Electrical connection: 1 Ph. 230 V. 50 Hz.

Condition: used, mileage: 86,091 km, power: 107 kW (145.48 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 2,985 kg, maximum load weight: 4,505 kg, overall weight: 7,490 kg, axle configuration: 6x4, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 5,160 mm, Equipment: ABS, additional headlights, differential lock, immobilizer system, traction control, Emission standard: EEV Second set of tires Snow plow Epoke FK/G3 No. 71610143 Salt spreader: Epoke S2400 No. 24490348 Non-binding offer – subject to change and prior sale – sale is made without any warranty – all information provided without guarantee! Iodpfx Akexx R E Ejxsia

Condition: excellent (used), Year of construction: 2020, operating hours: 1,440 h, machine/vehicle number: 52011681743190, load capacity: 300 kg, overall weight: 3,490 kg, product width (max.): 2,190 mm, working height: 16,150 mm, enginetype: Electric, manufacturer: Multitel-Pagliero Iiedpfxox A N Rzo Akxja

Year of construction: 2000, condition: good (used), Contributed tool holder VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. WOHLENBERG etc. 2.piece . SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1.piece . SAUTER 0.5.921.106072.814 No.3 with ATC 1.piece . WENDEL 214.060/A3820 No.4 with ATC 2.piece . MULTIFLEX 252.71.566 No.5 and 6 Without ATC Ijdpfxsh Iz Dus Akxjia In good condition.

Condition: used, mileage: 215,890 km, power: 62 kW (84.30 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 1,950 kg, maximum load weight: 2,350 kg, overall weight: 4,300 kg, tire size: 195R14C, axle configuration: 4x2, wheelbase: 2,050 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, power assisted steering, trailer coupling, Vehicle location: Bovenden, registered as company vehicle, 1x air suspension seat, rear window, 5-speed manual gearbox, ABS (anti-lock braking system), work lights, storage box, leaf suspension, tow bar with ball head, trailer coupling, container locking system, rear stabilizer, red environmental sticker. Iedpfxoxzfcwe Akxjia Wheelbase: 2050 mm. Body: telescopic skip loader system for city containers. Optionally available with 2 containers for an additional charge of 2,000 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Iijdpex A Dy Rofx Akxoa Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, PRIMULTINI bandsaw model 1600 in very good working condition. 2 units available. I speak Italian, Bosnian, and Serbian. 1 PRIMULTINI manufactured in 2016 and 1 unit manufactured in 2017. Iijdpfx Aeyha A Tjkxea

Condition: good (used), Engine control, software, hardware Ijdpscpg Hgsfx Akxjia -Manufacturer: IMPCO Spectrum -Type: 1026651B42605008 -Type: 14110020012229 -Type: 56-pin ECI -Quantity: 1 piece available -Price: per piece -Weight: 0.9 kg/piece

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Iedpfx Aksh Tkraexjia Max. KO length (die side): 80 mm Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: new, Year of construction: 2024, functionality: fully functional, Magnetic coolant separator MMA series, type MMA-100a Made in Poland by MultiMasz. Declaration of Conformity + manufacturer's warranty. MMA-63a transmitting capacity 63 l/min. MMA-100a transmitting capacity 100 l/min. MMA-160a transmitting capacity 160 l/min. MMA-250a transmitting capacity 250 l/min. Standard Voltage 3 X 400V/50Hz [other on request] Rotation speed of the drum 4,9 rpm Power 0,18 kW Ijdpfjuuinwox Akxjia MMA separators are designed for work primarily on grinding machines, and other machines tools and devices with water-based coolants, or straight cutting oils, to extends the life cycle of machine tools and the cooling fluids. MMA Separator provides increased productivity with less downtime for machine coolant replacement. It is the best solution to perform the machining accurately due to the quality of the surface and the accuracy of the final dimensions. Shipping available all over the world.

Year of construction: 2015, condition: used, MultiWeigh MW 16 Head Combination Weigher – High Accuracy | Fully Complete | High speed machine with memory buckets We offer this MultiWeigh MW 16-head combination weigher, manufactured by HD-Wiegetechnik Sondermaschinen GmbH (Germany). MultiWeigh is globally recognized for precision weighing technology, reliability, and long service life in the food processing industry. This machine is fully complete, in good working condition, and supplied including collecting chute, making it ready for immediate production use. Technical Specifications - Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) - Machine Type: MW 16 2.01 57° 3 MIX - Number of Weighing Heads: 16 with memory buckets (high speed) - Control System: IPC 511 - Scale Interval (d): 1.0 g - Scale Interval (dw): 5.0 g - Operating Temperature Range: 0 – 45 °C - Year of Manufacture: Certification: CE marked ----- Capacity (depending on product & target weight) Iiodpfxsx Synfo Akxja - Up to ±120 weighments per minute - High speed and accuracy depending on: Typical products include: - Meat & poultry portions - Cheese blocks or cubes - Frozen IQF products - Snacks & confectionery - Fresh and processed food products ----- Condition & Scope of Supply - Good working condition - Fully complete - Supplied with collecting chute - Robust stainless-steel construction - Easy to clean and maintain - Suitable for integration into existing packaging lines ----- Key Advantages - Proven German engineering - High weighing accuracy - Flexible for a wide range of products - Reliable IPC-based control system - Ideal for food processors seeking performance and durability ----- Availability - Available directly from stock - Machine can be inspected under power by appointment - Worldwide delivery possible Offered by STC Food Solutions – Used Food Processing & Packaging Machinery Contact us for pricing, lead time, videos, or additional technical information. ----- Keywords MultiWeigh combination weigher, MultiWeigh MW 16, 16 head weigher, used multihead weigher, food weighing machine, combination scale, packaging line weigher, German multihead weigher, meat weighing machine, cheese weigher * Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) * Year of Manufacture: / * Certification: CE marked

Condition: used, mileage: 10,539 km, power: 75 kW (101.97 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,515 kg, maximum load weight: 985 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 1,850 mm, next inspection (TÜV): 01/2027, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,750 mm, loading space width: 1,250 mm, loading space height: 300 mm, maximum speed: 50 km/h, Equipment: additional headlights, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * Multiple units available * Only 10,539 km – original * ONLY 974 operating hours * MOT valid until 01/2027 * Condition as shown in the photos * KIF snow plough blade * Clearing width: 1,700 mm * KIF combination rear spreader * HAKO broom available at extra cost * With only 1.32 meters width, the Tremo is the ideal compact tool carrier for pedestrian zones, narrow alleys, driveways, etc. * Three-way tipper with steel floor and aluminium drop sides * Body dimensions: L=1,750 x W=1,250 x H=300 mm * 4x4 all-wheel drive with crawler gear * Four-wheel steering selectable – turning circle only 3.10 meters * EasyDrive (hydrostatic drive) (SN) * Heated front windscreen * Front linkage * VW industrial engine * Joystick controls * Radio CD * Comfort cabin with 2 seats * Municipal hydraulics + rear hydraulics * Rotating beacon * Worm gear drive * Winter service lighting * Work lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Unladen weight: 2,515 kg * Payload: 490 kg * ... * Various attachments for year-round use available at extra cost Should a new MOT inspection be required, we will be happy to provide a quote from our partner workshops. Our offer generally does NOT include new MOT, new DGUV, new periodic inspection, or new UVV. Iedpfex Sramex Akxsia You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in this offer. Buyers are required to independently verify the condition and equipment of the goods/vehicles for themselves. Subject to change, prior sale, and error.

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB Iijdpfx Asv R Edqekxsa 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: used, mileage: 11,784 km, power: 75 kW (101.97 HP), first registration: 11/2010, overall weight: 5,000 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,260 mm, loading space length: 2,120 mm, loading space height: 300 mm, Year of construction: 2010, number of seats: 2, Equipment: air conditioning, all wheel drive, Internal vehicle no.: G190274 German vehicle On our premises in Kaufungen - Kassel, available immediately More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 4x4 all-wheel drive Only 11,784 km Ijdpfxjwbxyrj Akxjia Only 5,266 operating hours Year of manufacture: 2010 Subject to errors and changes We are pleased to accept your used vehicle in part exchange. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 27,500 km, power: 75 kW (101.97 HP), first registration: 12/2010, overall weight: 4,800 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro3, number of seats: 2, Equipment: all wheel drive, soot filter, Multicar M26.7 Profiline ( completely revised ) Vehicle can be unloaded to 3.5T. * 3L 74KW 101 PS ( engine new ) Isdpfxjt Spths Akxeia * short wheelbase * all wheel drive * Creeper gear * Tipper * Municipal hydraulics * AHK ball 3500kg * Load package 4800kg * Unloading to 3500kg possible * Price incl. VAT

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 105 mm, turning length: 2,000 mm, Brand new TMD 66/2000 series by MultiMasz comes with the same standard equipment, as liste below. However, our customers can always rely on customizing the machine and adding the necessary components and attachments to fully unlock its capabilities. Lathe in the video is additionally equipped with: Quick-change tool post (Multifix) Taper turning attachment Grinding attachment TECHNICAL PARAMETERS Turning diam. over bed [mm] 660 Turning diam. over support [mm] 400 Turning diam. over the gap [mm] 870 Max workpiece lenght in the gap [mm] 240 Turning between the centres [mm] 2000 Bed width [mm] 390 Max tool top size [mm] 25×25 Max distance from the tool post to spindle axe [min] 265 Max travel of cross slide [mm] 295 Max travel of saddle [mm] 145 Distance from the spindle axe to the bed surface [mm] 330 Distance from the spindle axe to the shelf of the tool post [mm] 25 Spindle rotation range [rpm] 36-1600 [12] Spindle bore [mm] 105 Spindle taper MT6, fi 113mm, 1:20 Metric threads range 1-14 [22] Inch threads range 2-28 [25] Module threads range 0,5-7 [18] DP threads range 4-56 [24] Max travel of the tailstock sleeve [mm] 150 Tailstock sleeve taper MT5 Tailstock sleeve diameter [mm] 75 Main motor power [kW] 7,5 Rapid travel motor power [W] 300-370 Iodpfx Ajxqf D Hokxsia Coolant pump motor power [W] 120 Width [mm] 1100 Height [mm] 1600 Lenght [mm] 3200 / 3700 STANDARD EQUIPMENT: Digital readout system (DRO) for 3 axes based on optical scales 3-jaw chuck Ø 315 mm with driving plate 4-jaw chuck Ø 400 mm with driving plate Steady rest Ø 20-120 mm Follow rest Ø 20-80 mm Safety guards (chuck, tool post, lead screw and driving shafts) Reduction sleeve 110/6 Dead centre 6 i 5 Lighting and cooling system Tool box We guarantee spare parts availability for 10 years from the date of purchase and provide expert technical support for the full lifetime of your machine. Other new lathes you can find on our website. More info on request.

Condition: used, operating hours: 6,006 h, mileage: 128,153 km, power: 107 kW (145.48 HP), first registration: 03/2012, overall weight: 7,490 kg, fuel type: diesel, color: orange, axle configuration: 6x4, maximum load weight: 4,180 kg, empty load weight: 3,310 kg, wheelbase: 2,450 mm, brakes: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, parking heater, parking sensors, power assisted steering, soot filter, trailer coupling, German vehicle, condition as shown in the photos. Multicar in rare 6x4 configuration with 3 axles, fitted for winter service. Equipped with Fiedler snow plough, model: FRS 2420, clearing width up to 2,400 mm; Fiedler flat silo spreader, model: FSS 2000, container volume 2.0 m³, spreading width: 1.00 to 8.00 m. Features: front lift, quick-change system, trailer coupling, towing capacity: 3,500 kg, air conditioning, auxiliary heater, comfort seat, 5-speed gearbox, joystick control, electrically heated mirrors, reversing camera, radio USB, roof beacons, electric windows, leaf suspension, emissions standard Euro 5 EEV, rotating beacon, approved for 90 km/h, etc. Various attachments for year-round use available at extra cost: Dücker Uni Arm UNA200, Schmidt delineator post washing system RPS-H for front mounting incl. 1,000-liter water tank, etc. Wheelbase: 2,450 mm, gross vehicle weight: 7,490 kg, unladen weight: 3,310 kg. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the opportunity to inspect and check the goods so that buyers have a clear understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Iedpfx Ajwmc Spskxeia All details are provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,040 h, power: 90 kW (122.37 HP), CAR BASKET MULTITEL ALU 160 – 16.30 m ON NISSAN VEHICLE (B CATEGORY) Year of production: 2014 | Registration: 1G | Condition: Excellent A RELIABLE CAR BASKET FOR PROFESSIONAL USE The Multitel ALU 160 car basket, mounted on a Nissan vehicle, provides the ideal combination of mobility, efficiency and ease of use. Thanks to the ability to operate with category B, this model is the perfect choice for field work, service stations, utility companies and assembly companies. TECHNICAL SPECIFICATIONS Working height: max. 16.30 m (operational up to 16.5 m) Horizontal reach: up to 7.95 m at 200 kg (10.5 m at lower load) Bucket capacity: 200 kg Working range: 360° tower rotation Bucket rotation: ±60° Bucket dimensions: 1.40 × 0.70 × 1.10 m Supports: 4 hydraulic stabilizers Transport dimensions (L × W × H): 6.69 × 2.10 × 2.78 m Kernmanus weight: 3,350 kg | GVW: 3,500 kg Engine: Diesel 90 kW | Standard: EURO 5 Mileage: approx. 76,800 km |Operating hours: approx. 3,040 h MAIN ADVANTAGES Suitable for drivers with category B Compact, reliable and easy to maneuver construction 360° working circle for maximum flexibility Serviced and ready to work Available service and spare parts in Croatia Possibility of independent inspection (TÜV Croatia or SGS Adriatica) MODEL DESCRIPTION The Multitel ALU 160 is known for its durable aluminum construction and reliable hydraulic system. Thanks to four hydraulic supports and 360° rotation, it enables safe and stable operation in all conditions. Easy operation and compact dimensions make it ideal for working in urban areas and confined spaces. CHECK AND INSPECTION All vehicles undergo a detailed check in our specialized workshop (Trigon Dizalotehnika Servis) - including mechanical, hydraulic and body elements. At the customer's request, we also organize an independent inspection through the accredited body TÜV Croatia d.o.o. or SGS Adriatica d.o.o., which includes: Functional check of the lifting system, stability and safety switches Visual and technical analysis of the supporting structure and hydraulics Technical condition report with photo documentation Iiodpfx Ajxvyyajkxoa Certificate of compliance with EU safety guidelines (Directive 2006/42/EC) This gives the customer an additional layer of confidence and the ability to independently verify the condition of the machine before purchasing. DOCUMENTATION AND SERVICES Service book and documentation available for inspection Assistance with registration and import Vehicle delivery to your location in Croatia or the EU Possibility of leasing or financing Replacement of old vehicle by agreement TRIGON DIZALOTEHNIKA d.o.o. Importer and general representative of Multitel and GSR car baskets for Croatia, Slovenia, Montenegro, Bosnia and Herzegovina and Serbia. More than 30 years of experience in sales, service and rental of work platforms. First hand – service, spare parts and technical support available throughout Croatia.

Condition: good (used), functionality: fully functional, power: 75.02 kW (102.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2008, Equipment: all wheel drive, hydraulics, MULTICAR TREMO X56 Euro-4 Iijdjxbf Slspfx Akxsa Municipal implement carrier with winter service equipment This Multicar Tremo X56 E4 was manufactured in 2008 and has approx. 2,000 operating hours. The vehicle has recently undergone servicing and is in well-maintained overall condition, showing the typical signs of use and wear for this equipment class. Winter service equipment includes: - KIF rear-mounted spreader - KIF snow plough with 150 cm clearing width – hydraulically adjustable The sale is made as a used machine, with return, guarantee, and warranty excluded. Net price €25,126 // Gross price €29,900 - Viewing and test drive are welcome! - Nationwide shipping can be arranged; costs depend on distance! - We are happy to provide an attractive leasing or financing offer through our leasing partner!

Condition: used, mileage: 92,092 km, power: 78 kW (106.05 HP), first registration: 01/1999, fuel type: diesel, overall weight: 4,800 kg, gearing type: mechanical, Equipment: tail-lift, Winter service equipment Stainless steel salt spreader Iijdpfxexrivco Akxja Snow plow, adjustable snow plow, snow remover, platform, additional hydraulics

Year of construction: 2009, condition: used, Multiweigh 2010, dimple plate with discharge gate Iijdpfxjliun Rs Akxoa 6 liter buckets.