Used 60 Ton C-Type Eccentric Press for sale (93,467)

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Ndjdpfx Ahouqc Enjkja Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Ndjdpfsuqc Hfjx Ahkea Extended machine accessories Press body can be tilt

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Nsdpfx Ajk S Htxjhksda Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Ndedpektm N Djfx Ahksa

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ndjdstqwtdspfx Ahkea Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Nodpfx Ajdzqddjhkeda Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: new, Year of construction: 2023, Nominal pressing force 1,000 kN Ram stroke, adjustable in stages 16...140 mm Ram adjustment 90 mm Outreach 295 mm Stroke rate in idle 70 / min Ndedpfx Ahedulidskea Tool mounting height at maximum stroke, bottom and adjustment at the top 420 mm* Table clamping area (W x D) 1,050 x 660 mm Ram clamping area (W x D) 640 x 460 mm Dowel bore in the ram 65 H7 mm Power of the main motor 7.5 kW Approximate machine height 3,085 mm Machine weight 8,500 kg with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV standards.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Ndjdjzt Iaijpfx Ahkja Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: new, TIGERMETAL WH60 – Hydraulic Workshop Press 60 Tons | Electric + Manual Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing operations in workshops and industrial environments. With a pressing force of 60 tons, the machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine adjustment for sensitive applications. The solid steel construction and the laterally adjustable cylinder allow versatile applications while ensuring high stability and safety. 🔧 Technical Data: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tons Drive: Electric motor + manual pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Durable, heavy-duty steel construction Ndedpfxsf Sqcro Ahkea ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. prisms, support plates) A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The pressure cylinder is mounted on a sliding carriage, allowing it to be moved sideways. This ensures optimal use of the maximum frame opening width. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Worldwide delivery available! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: excellent (used), Year of construction: 2009, operating hours: 41,696 h, overall weight: 1,040 kg, load capacity: 60 kg, arm reach: 1,960 mm, controller manufacturer: ABB, controller model: IRC5, The IRB 4400 is a 6-axis industrial robot, designed specifically for manufacturing industries that use flexible robot-based automation. The robot has built-in process ware, an open structure that is specially adapted for flexible use, and can communicate extensively with external systems. Specifications: Payload: 60 kg Arm Reach: 1960 mm Model Type: IRB4400 Controller: IRC5 Ndedpowp Nbcefx Ahksa Model Year: 2009 Working hours: 41969 Conditions: Used & Tested & Battery Changed & Painted Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant Contact us to request the robot working video and position repeatability test video ! We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2008, operating hours: 34,160 h, functionality: fully functional, overall weight: 1,040 kg, load capacity: 60 kg, controller model: IRC5, The IRB 4400 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 4400 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2008 (Multiple options available) Cabinet: IRC5 Teach Pendant: Included Condition: Used & Painted Signalling & Power Cables: Included (15m) Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website) Ndjdpfx Ahewf U T Asksa

Condition: used, Year of construction: 2012, operating hours: 651 h, lifting height: 4,700 mm, free lift: 4,700 mm, fuel type: diesel, Forklift BAOLI CD35 – sideshift – total weight 4,760 kg – maximum lift height 4,700 mm – 651 operating hours = Additional Information = Year of manufacture: 2012 Unladen weight: 4,760 kg Reference number: 5 Nedpfx Ahex Scm Rokeda Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2013, operating hours: 12,310 h, functionality: fully functional, overall weight: 575 kg, load capacity: 45 kg, arm reach: 2,050 mm, ABB industrial robot featuring an IRB 4600-45/2.05 Type C manipulator and an IRC5 M2004 controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 45 kg and a reach of 2050 mm. Manufactured in 2013, it has accumulated 12,310 operating hours and is running RobotWare software version 5.15.0266.00. It is equipped with a FlexPendant teach pendant, two connection cable sets, and a power cable. Nodpjzamidefx Ahkoda

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Ndsdpfx Ahezamf Sjkja

Condition: used, Year of construction: 2017, operating hours: 18,243 h, functionality: fully functional, machine/vehicle number: Robot: 4600-105209 / Controller: 4600-105209, overall weight: 562 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2017, with 18,243 operating hours and RobotWare RW 6.05.00.00 software. Equipped with an ABB FlexPendant teach pendant and a connection cable set. Nsdpszamc Defx Ahksda

Condition: used, Year of construction: 2022, operating hours: 9,118 h, functionality: fully functional, machine/vehicle number: Robot: 4600-110103 / Controller: 4600-110103, overall weight: 585 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. Payload is 40 kg with a reach of 2550 mm, manufactured in 2020, with 9118 operating hours, and RobotWare RW 6.10.02.00 software. Equipped with an ABB FlexPendant programming pendant, a connection cable set, and a Foundry Plus protection version with a “Foundry Plus” label. Njdjzamcwepfx Ahkjda

Condition: used, Year of construction: 2022, operating hours: 9,652 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109931 / Controller: 4600-109931, overall weight: 585 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg, with a reach of 2550 mm. It was manufactured in 2020 and has 9652 operating hours. The software version is RobotWare RW 6.10.01.00. It is equipped with an ABB FlexPendant teach pendant, a connection cable set, and a Foundry Plus protective version, indicated by the “Foundry Plus” marking. Nsdjzamcdopfx Ahksda

Condition: used, Year of construction: 2019, operating hours: 9,580 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109272 / Controller: 4600-109272, overall weight: 570 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2019, with 9580 operating hours. Equipped with ABB FlexPendant programming device, connection cable set, and Foundry Plus protection version with “Foundry Plus” marking. Nsdszambmjpfx Ahkeda

Condition: used, Year of construction: 2019, operating hours: 9,327 h, functionality: fully functional, machine/vehicle number: Roboter: 4600-108236 / Steuerung: 4600-108236, overall weight: 654 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600-40/2.55 Type C manipulator and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg with a reach of 2550 mm. It was manufactured in 2019 and has 9327 operating hours. The software version is RobotWare 6.08.00.01. It is equipped with an ABB FlexPendant programming device, a cable set, and the software options Multitasking and HomePosRunning. Nedpfx Aezak E Nehkeda

Condition: new, functionality: fully functional, power: 40 kW (54.38 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH DRYMIX 60 fully automatic dry-type concrete batching plant stands out with its special design that does not include a mixer. Concrete components are transferred directly to the transit mixers via precision weighing systems without any mixing process. This feature provides a significant advantage in projects where concrete needs to be transported long distances from the production area. DRYMIX 60 is an ideal solution for long-term projects, offering both high-performance production capacity and low maintenance requirements. The plant is compatible with cement silos of different sizes, ranging from 50 to 500 tons, depending on the project and site conditions. When bagged cement is used, it is easily loaded into the cement silos thanks to the integrated blasting bunker and silo filling systems. Furthermore, the plant can be equipped with special heating or cooling systems depending on the climatic conditions of the region where it will be installed. In cold regions, the system is equipped with steam generators and insulated panels, while in hot regions, it is supported by equipment that cools the concrete. Aggregate pre-feeding systems eliminate the need for a bucket ramp, facilitating installation. In situations where site space is limited, aggregate transfer can be performed using a bucket system instead of a conveyor. DRYMIX 60 is equipped with high-quality SIEMENS and SCHNEIDER brand electronic components and manages the entire production process safely and efficiently with its user-friendly PLC-based automation system. DryMix-60 Dry Type Concrete Batch Plant Technical Specifications Production Capacity: 60 m³/h Weight: 27 tons (excluding cement silo) Nodpfxoxphpco Ahkoda Total Motor Power: 55 kW Electric Generator Requirement: 80 kVA Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 600 x 9,700 mm Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 l Additive Weighing Bunker: 30 l Air Compressor: 300 liters, 4 kW Cement Silo: 50–500 ton capacity option Control Type: Fully Automatic Why Choose DRYMIX 60 | Dry Type Concrete Mixing Plant? CONSTMACH DRYMIX 60 is a plant model that stands out in the industry with its efficiency and durability. Its modular design offers easy installation and portability, while the automatic control system ensures maximum precision in the production process. Energy-efficient motors and high-quality equipment guarantee long-term use. If you want to save time, labor, and costs in your projects, the DRYMIX 60, manufactured with the CONSTMACH guarantee, is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 40 kW (54.38 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH DRYMIX 60 fully automatic dry-type concrete batching plant stands out with its special design that does not include a mixer. Concrete components are transferred directly to the transit mixers via precision weighing systems without any mixing process. This feature provides a significant advantage in projects where concrete needs to be transported long distances from the production area. DRYMIX 60 is an ideal solution for long-term projects, offering both high-performance production capacity and low maintenance requirements. Ndsdsxp U Sdspfx Ahkoa The plant is compatible with cement silos of different sizes, ranging from 50 to 500 tons, depending on the project and site conditions. When bagged cement is used, it is easily loaded into the cement silos thanks to the integrated blasting bunker and silo filling systems. Furthermore, the plant can be equipped with special heating or cooling systems depending on the climatic conditions of the region where it will be installed. In cold regions, the system is equipped with steam generators and insulated panels, while in hot regions, it is supported by equipment that cools the concrete. Aggregate pre-feeding systems eliminate the need for a bucket ramp, facilitating installation. In situations where site space is limited, aggregate transfer can be performed using a bucket system instead of a conveyor. DRYMIX 60 is equipped with high-quality SIEMENS and SCHNEIDER brand electronic components and manages the entire production process safely and efficiently with its user-friendly PLC-based automation system. DryMix-60 Dry Type Concrete Batch Plant Technical Specifications Production Capacity: 60 m³/h Weight: 27 tons (excluding cement silo) Total Motor Power: 55 kW Electric Generator Requirement: 80 kVA Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 15 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Weighing Belt: 600 x 9,700 mm Cement Weighing Bunker: 600 kg Water Weighing Bunker: 300 l Additive Weighing Bunker: 30 l Air Compressor: 300 liters, 4 kW Cement Silo: 50–500 ton capacity option Control Type: Fully Automatic Why Choose DRYMIX 60 | Dry Type Concrete Mixing Plant? CONSTMACH DRYMIX 60 is a plant model that stands out in the industry with its efficiency and durability. Its modular design offers easy installation and portability, while the automatic control system ensures maximum precision in the production process. Energy-efficient motors and high-quality equipment guarantee long-term use. If you want to save time, labor, and costs in your projects, the DRYMIX 60, manufactured with the CONSTMACH guarantee, is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards) Nedpfemmuq Isx Ahksda

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 Ndjdpfx Aoygnk Ashkea - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Nodpou Hautefx Ahksda Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a rigid four-column body construction. The St52 grade steel frame is stress-relieved via vibration methods, ensuring long-term retention of high parallelism and squareness tolerances. The ram and bolster systems operate independently, with stroke and pressure settings precisely controlled via a touchscreen interface. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled systems, it provides high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts keep maintenance requirements to a minimum. This model is the ideal solution for medium-scale mass production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and bolster - Full control via touchscreen panel - High precision and repeatability - Low maintenance costs, long service life Ndsdpfsx N Ulyex Ahkoa Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BOLSTER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BOLSTER): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Vibration stress relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BOLSTER TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BOLSTER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3,500 mm APPROX. PRESS WIDTH: 1,150 mm APPROX. PRESS DEPTH: 1,150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1,200 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / BOLSTER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 7.5 Ton Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.