Used 3D Printer Polyjet for sale (4,044)

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, overall weight: 2,200 kg, construction height: 500 mm, construction width: 800 mm, No minimum price – guaranteed sale to the highest bidder! The original printer was upgraded to the J4100 type in 2025 with a €135,000 upgrade! It is practically as good as new! TECHNICAL DETAILS Maximum build size: 1,000 x 800 x 500 mm Maximum layer thickness: 27 µm High speed: Up to 3 base resins, 27 m resolution Super-high speed: 1 base resin, 55 m resolution MACHINE DETAILS Power supply: 110 - 240 V Dimensions & Weight Dimensions: 2,870 x 1,960 x 2,105 mm Total weight: 2,200 kg Csdpfezkvpyox Afgshc EQUIPMENT Exchangeable print plate with mobile lifting frame Various spare parts PolyJet UV technology

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Chjdpoz A Sycefx Afgec Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm Chsdpfjzixy Sjx Afgjc - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use Chsdpfx Afswmq Dyegjc This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Cjdoy U H Idopfx Afgohc Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Year of construction: 2018, condition: ready for operation (used), An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible. Cedpozqfwtofx Afgjhc

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Csdpjqwkypsfx Afgohc

Condition: used, TECHNICAL DETAILS - Max. print size : 490 x 390 x 200 [mm] - Max. print volume : 38.22 [L] - Min. print thickness : 0.02 [mm] - XY accuracy : 0.03 [mm] - Materials : Thermoplastic - Power supply : 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1,400 x 1,260 [mm] Cjdpfx Aeuhcbpjfgshc - Machine height : 1.100 [mm] - Machine weight : 429 [kg]

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SLM250182820, Year of construction: 2018, total length: 110 mm, total width: 100 mm, laser power: 250 W, laser wavelength: 1,070 nm, type of cooling: air, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser System Laser type: Fiber laser Cedpfxey Sm D Hj Afgohc Laser power: 250 W Wavelength: 1,070 nm Spot size: 40 µm Cooling: Air cooling Process Chamber Process atmosphere: Low-oxygen environment Shielding gas: Argon / Nitrogen Max. extraction system flow rate: 190 m³/h Coating System Coater: Precision coater with rotary guide Coating blade: Steel, rubber, or brush system Micrometer screws: For optical alignment of the coater MACHINE DETAILS Printing Process: SLM (Selective Laser Melting) process Operation Control model: 12" Microsoft Surface Pro 3 tablet Control type: Tablet-based control and monitoring Build Volume and Powder Reservoir Build volume: 100 mm x 110 mm Reservoir volume: 110 mm x 200 mm EQUIPMENT Integrated extraction system Cartridge system for quick and safe metal powder replacement Monitoring and adjustment of process parameters Cloud manufacturing technology Accessories as shown in the images

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Codpozii Umjfx Afgehc Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing Chodpozdnplsfx Afgsc • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with the serial number P1588. This center was used as a testing center. Internal component: Table: 203x203x305 mm Nozzle head: computer-controlled Material cassette: automatically refillable Technical data: Dimension Dimensions: 686x1041x914 (W x H x D) Chjdoh Uc Iqjpfx Afgsc Weight: 136 kg Max. build volume: 203x203x305 Electrical connection: 230V, 60Hz, 15A Accessories: - Power supply - 20 material cassettes - Operating manual - Basic training manual - Various software - 29 table tops Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible!

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Chodpfxsww Ivnj Afgoc

Condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 2117506, Year of construction: 2021, input voltage: 230 V, input frequency: 60 Hz, Device data: Model: VSHAPER 500 PRO (VS-50-PRO) Version: G2.0 Year of manufacture: 2021 Serial number: 2117506 Origin: Made in EU Connection voltage: 230 V ~ 50/60 Hz Condition: Defective - cause of fault unknown Technical highlights: Dual extrusion with 4 print heads (LT + HT) for a wide range of materials Chedpfxezzcg He Afgsc High-temperature capable up to 420 °C - suitable for technical plastics Wide print head compatibility: V-JET, V-PREC-SINGLE, V-PREC-S-MED series Original purchase value (2021): approx. €41,041.00 net Other: The device was acquired and put into operation as a demonstration machine in September 2021. The originally included 1-year manufacturer's warranty (V-SERVICE SILVER) has expired.

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Chodpfsx H S N Rex Afgsc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit Cjdpsyc Ub Tsfx Afgshc 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Chjdpfx Aey H Hxyefgoc Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Chodpfx Afsy Uzciogoc Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Codpfx Afsz Irhksgehc Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals Disassembly logs Functional logs All axes secured for transport in a professional manner The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys Last material processed: AlSi10Mg

Condition: refurbished (used), For Sale: EOS P730 – Guaranteed Working Condition This EOS P730 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-performance machine is designed for demanding SLS production environments. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames Upgrade Options: Take your EOS P730 to the next level with available upgrades, such as: • Coherent C70 laser upgrade for enhanced performance • Laser window upgrade for improved efficiency • And more! Contact us for details. Materials Highlight We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) Chodpfxoq E I Ans Afgec At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries!

Condition: refurbished (used), For Sale: EOS P395 – Guaranteed Working Condition Chodpfx Afeq E I A Dsgec This EOS P395 is fully inspected and revised by Inframotion 3D (IM3D) to ensure top performance. Equipped with a reliable Synrad CO2 laser, this machine is ideal for efficient SLS production. Included in the package: • 2 build frames • Water cooler Materials Highlight We offer a range of plug-and-play materials that are fully tested and optimized for use with EOS systems. Our Inframotion PA12 provides exceptional performance and offers significant cost savings compared to OEM powders. By switching to our materials, you can lower production costs without sacrificing quality or reliability. Services Included: • Transport & Installation: We ensure safe delivery in the original EOS packaging and provide professional installation. • Warranty & Maintenance Plans: Flexible options are available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables like our plug-and-play PA12, tested and optimized for EOS systems, offering significant cost savings. • Complete support: From transport to tailored maintenance plans, we handle everything. Trust IM3D for dependable machines, premium materials, and the expertise to optimize your SLS production. Contact us today for more information or specific inquiries!

Condition: refurbished (used), For Sale: EOS P760 – Guaranteed Working Condition This EOS P760 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Coherent C70 lasers like on the P770, this high-performance machine is designed for demanding SLS production environments. With this P760, you can expect print quality similar to that of the P770. The p770 prints faster however. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames Materials! We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Chodpfxov Dxw Dj Afgsc Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries!

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. Chodpfezk Ekgsx Afgec • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: new, functionality: fully functional, Year of construction: 2026, total length: 3,000 mm, total height: 2,000 mm, warranty duration: 12 months, I offer a robotic 3D printer with an extruder from the manufacturer Cead and CNC control Siemens Sinumerik One - a solution for large-format printing of molds, design elements, boats, molds for lamination and much more. The machine is made in the Czech Republic and is offered including integration at the customer's site and training. Main features: Printing system: Extruder CEAD E25 (up to 12kg/h) or S25 (up to 24kg/h) - selection according to customer requirements Cedpfxewgkqts Afgohc Robotic arm: COMAU N-170 with a reach of 3 meters and a load capacity of 160 kg Control system: Siemens SINUMERIK ONE - full CNC control, the possibility of debugging the technology using override. Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Optional accessories: Heated print bed to optimize adhesion and print quality Note: Software and print bed are not included in the standard offer, they can be supplied as optional accessories. The price listed is with the basic Cead E25 extruder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Chjdpjxu E Srefx Afgsc Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA