Used Zorzi Low Loader Semitrailer for sale (15,120)

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dodpfx Asi Rqi Ssl Aswc

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) Dwodpfx Aszzhfnjl Aoc * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt from Equipment List Loading Platform * in extendable design with a rear slope of approximately 1,000 mm x 8° Hardwood Decking * approximately 48 mm thick, with ribbed metal sheeting over the axles JOST King Pin * (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) BPW Axles and Suspension * 2 fixed axles * 1 trailing axle * Technical axle load: 12,000 kg each Air Suspension * with lifting and lowering valve Braking System * in accordance with EU regulations with EBS-E (2S2M) Accessories * 2-inch king pin * One galvanized steel front panel, approximately 400 mm high * Load manometer for determining axle loads, including load diagram * Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * One galvanized toolbox integrated into the sloping gooseneck (± 47 kg) Djdpfx Aozv A Aqjl Aowc * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg) * 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg) * Galvanized extensions, extendable by approximately 230 mm on each side (± 230 kg) * Lift axle on the front axle * Adjustable mounting rails for aluminum ramps at the rear of the vehicle * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg) * Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg) * A mounting bracket for a rotating beacon on the warning panels * One rotating beacon supplied separately * HRM Metallization (High Resistance Metallization) Painting * Top coat, single color in RAL 3002 carmine red.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, headboard, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Dwedpoz I Smgsfx Al Ajc

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Dwsdpfx Alsz I Shke Aec

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Dedpjzu Ebtofx Al Aowc Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: used, overall weight: 34,000 kg, axle configuration: > 3 axles, first registration: 02/1998, loading space length: 13,000 mm, loading space width: 2,550 mm, Equipment: ABS, Nooteboom MC0-73-04V Low-loader with Steering Axle For inquiries: 0726698 * Permissible total weight: 34,000 kg * Tare weight: 17,220 kg * ABS * EBS * 4-axle air suspension with hydraulic steering * Hydraulic loading ramp * SAF axles Dimensions (loading area/platform) Length of low bed: 9,100 mm + platform/gooseneck: 3,900 mm Tires: 1st axle: 245 / 70 R 17.5, 20% air-sprung, steering axle 2nd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 3rd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 4th axle: 245 / 70 R 17.5, 35% air-sprung, steering axle ----Price: 21,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: Dwodpfozu Ubcex Al Aoc * We speak: German, English, French, Polish, and ??? Typographical errors, errors and prior sale excepted.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Djdpfx Aez Dmn Rsl Ajwc Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Dedpfxerlm Txs Al Aswc Please get contact with us for more informaiton;

Condition: used, empty load weight: 5,070 kg, maximum load weight: 14,930 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 03/2018, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, For roll-off containers or skip loaders, surcharge for ramps: €1,000. -- Subject to printing errors, errors and changes. Sample images. More details: ! Dwjdpjz Nv Sqofx Al Asc

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Dodpozz Uncofx Al Aswc Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Dsdpfx Aljz Dmnwe Aewc Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dedpfx Aez Nv Ilsl Ajwc

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the highbed approximately 4,140 mm, length of the lowbed approximately 8,600 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 1,600 mm high, 18 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing points, 4 pairs of container locking mechanisms for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, surcharge for aluminum ramps, price: 2,200 €, spare wheel, price: 300 €, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Dwodpoz Hvdysfx Al Asc

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Dwedpfxjz Ed D Es Al Aoc Tare weight: 36,200 kg Maximum permissible load: 126,000 kg Payload: 89,800 kg

Condition: used, maximum load weight: 22,620 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 08/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, total length: 13,600 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 2-Axle Truck Transporter Semi-Trailer for the transport of 2 small construction machines (SZM) or one truck --New vehicle-- Permissible total weight: 32,500 kg Unladen weight: 9,880 kg Dodpfx Aezwa Tvjl Aswc External width: 2,545 mm Overall length: 13,600 mm Saddle height: 980 mm Hydraulic lift platform, completely enclosed Wheel recesses Hydraulic winch with 6,700 kg static pulling force, with radio remote control 24-volt electric hydraulic system ROR axles with drum brakes Tires: 8 x 205/65 R 17.5 Continental 2nd axle with trailing steering KNORR trailer EBS Hydraulically adjustable and tiltable loading ramps at the rear Loading angle: 11° Mechanically extendable rear underrun protection Complete trailer hot-dip galvanized, side panels painted in RAL 9005 RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: new, Year of construction: 2026, We have all Europe documents! We can delivery the trailers with FOB-EXW-CPT-CFR-CIF If you have an interest please contact with us; For European Countries; Dwodsqx Nd Rspfx Al Aoc For African Countries;

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control Dsdeyxb Tvopfx Al Ajwc * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Dwedpezvt Tyofx Al Ajc Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Dwsdjz H T Rqepfx Al Ajc

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 12,500 mm, total width: 2,500 mm, total height: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, leaf spring suspension, forced steering, loading ramps can be attached. Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning radius from corner/diagonal to kingpin center 1,800 mm, drum brakes. Dsdpji Rqwfsfx Al Ajwc ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Dwjdpfjz Nv Niex Al Asc

Condition: used, maximum load weight: 19,510 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2014, total width: 2,550 mm, total height: 4,000 mm, Wiese Low Loader SA31CS - S Wabco * Force-steered 2nd axle * Two-piece rear ramps, extendable version (electrically/hydraulically) * Central section hydraulically adjustable (form-fit for driving onto gooseneck) * Maximum internal height 3480 mm with lowered central section * Maximum internal height rear section: 3110 mm * Maximum internal height front section: 2630 mm * Reversing camera * SAF axles * Drum brakes * Winch * Edscha roof * Rear support * Sliding tarp on both sides * 14 pairs of small and 3 pairs of large lashing rings Sale and errors excepted! Information provided without guarantee! Dsdpsx Tx U Tefx Al Aewc

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area Dedpfx Ajz N Np Nol Aowc - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height Djdpfxjyq A D Eo Al Aewc * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026