Used Zmm / Huvema Hu 310 Vac for sale (6,141)

Condition: good (used), Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 2x motors available -Price: per piece Kdodpsb A Ixpsfx Akxek -Weight: 70 kg/piece

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Permanent Magnet Motor, Servo Motor -Max. speed: 1200 rpm -Drive: 2.6 kW Kdodpfx Akeb A Ixqexjk -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 1x motor available Price: per piece -Weight: 64 kg/piece

Condition: ready for operation (used), Siemens 1HU3056-0AF01-0ZZ9 -Z Z=X00 SN: E9310306142011 Permanent Magnet Motor, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Ksdpfxex Ip N Rj Akxsdk

Condition: new, Siemens 6SN1118-0DM31-0AA1 control module version B, serial number as per photo, unused, 100% functional, scope of delivery as per photos. Kdodpfxoxahdbs Akxjk

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Kdedpfx Aswfqh Aekxek Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: new, neu Bulgarien 109100 € 2061.99 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 Kodpfowirxqjx Akxedk turning length6.000 mm € 144 630,00

Condition: new, neu Bulgarien 53750 € 1015.88 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 M 21 12,5 - 1250 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60 - 1/4 Gänge/" 240 - 1 315 mm 90 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position Ksdjwirv Aepfx Akxsdk coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 turning length4.000 mm € 63 790,00 turning length5.000 mm € 78 860,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 44400 € 848.04 € 500 mm 1500 mm 250 mm 80 mm 0 mm 400 mm 8 80 M 21 20-2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4" Gänge/" Ksdpswiq Rfsfx Akxodk 240 - 1 315 mm 1 mm 90 mm 5 MK 2 mm 7,5 kW 3100 mm 1250 mm 1400 mm 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm € 46 190,00 turning length3.000 mm € 50 840,00 turning length4.000 mm € 56 2,00 turning length5.000 mm € 71 400,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107870 € 2038.74 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U Ksdpjwirghofx Akxedk 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Kdsdpewiq E Aefx Akxsk Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm Kjdpjwiq Drjfx Akxsdk 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" Kedpswiq Rxefx Akxodk FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg Kdsdpfx Akewiqv Uoxjk driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: new, neu Bulgarien 122250 € 2310.53 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 M 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm Ksdpfx Akewiqwfjxedk 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length6.000 mm € 157 780,00

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, construction height: 2,970 mm, battery capacity: 808 Ah, battery voltage: 80 V, fork length: 2,400 mm, empty load weight: 13,260 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards, ensuring top quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. Kdjdpfex Rwvqsx Akxsk ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get advice on site now – we’ll find the right solution for you. Industrial Truck Specifications: - Manufacturer: Heli - Model: Counterbalance Forklift CPD100-G3-4 - Drive type: Electric - Load capacity: 10,000 kg - Year of manufacture: 2025 - Operating hours: 0 - Lifting height: 4,800 mm - Mast type: Triplex - Full free lift: Yes - Overall height: 2,970 mm - Fork length: 1,800 mm - Unladen weight: 13,260 kg - Tyres: Solid rubber - Model designation: CPD100-G3-4 - Battery type: Lithium-ion - Voltage: 80 V - Capacity: 808 Ah - Battery weight: 800 kg - Charger: Integrated charger - Cabin type: Full cabin – windscreen, roof & rear window + steel doors (suspended) - Lighting: 2x front work lights - Lighting: 1x rear work light - Lighting: Rotating beacon - Lighting: Road traffic-compliant equipment for possible (limited) use on public roads: indicator, tail light, reversing light, reflector etc. - Attachments: Side shifter - Attachments: Fork positioner - Attachments: Additional hydraulic line routed to fork carriage

Condition: ready for operation (used), Siemens 1HU3104-0AH01-Z Permanent Magnet Motor, Z= see nameplate SN E6B61004703007. Professionally fully overhauled and tested with 24 months warranty, 100% functional. Scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please enquire for price separately! ATTENTION: Please enquire separately for packing and shipping costs! Ksdpox Dvniofx Akxodk

Condition: ready for operation (used), Siemens 1HU3102-0AD01 - Z Servomotor Z= see nameplate SN: BK5582669010027, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please enquire about the price separately! Kjdpfx Akox Dvl Ioxedk

Condition: ready for operation (used), Siemens 1HU3102-0AH01-Z permanent magnet motor, Z = see nameplate, serial number as per photo, used, heavy signs of wear, 100% functional, scope of delivery as shown in photos. Kdjdpfx Aox Dvmljkxek

Condition: ready for operation (used), Siemens 1HU3104-0AH01-Z servomotor SN: F4082791611001 with Heidenhain ROD 426 A 2500 encoder ID: 223 675 1G SN: 2833618, used, in good condition, fully functional, delivery as shown in the photos. ATTENTION: Please enquire separately for costs of packing and shipping! Kodpfx Aksx Dvpgoxjdk

Condition: ready for operation (used), Siemens 1HU3104-0AD01 DC servomotor SN: E4H89865801003, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packaging and shipping costs separately! Kdsdpfsx Dvm Sex Akxjk

Condition: ready for operation (used), Siemens 1HU3104-0AD01-0ZZ9 - Z Permanent Magnet Motor Z= see nameplate SN:E7184537902003, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire separately for costs of packing and shipping! Kdsdpfox Dvncsx Akxek

Condition: ready for operation (used), Siemens 1HU3104-0AH01-0ZZ9-Z Motor SN: E9165604302006 – without tachogenerator – Z = G89, G45 (holding brake installed), used, heavy signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Kdodpfx Akox Dvpajxjk

Condition: ready for operation (used), Siemens 1HU3102-0AH01-Z Permanent Magnet Motor SN:E6H63576004003, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in photos. Agreed sales discounts do not apply to this item. Please inquire about the price separately! Kodpox Dvmxjfx Akxsdk

Condition: new, Siemens 1HU3102-0AH01-Z permanent magnet motor, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Kedpfxsx Dvmrj Akxsdk

Condition: ready for operation (used), Siemens 1HU3102-0AH01-Z Permanent Magnet Motor Z = see nameplate SN: E5M61141001005, professionally fully overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please request the price separately! Kedpsx Dvmfsfx Akxsdk