Used Wmw Heckert Fuw 250 Iv for sale (12,406)

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg Dkjdpfsg Rcy Tsx Ah Ijn

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Dkjdsd Itcqopfx Ah Ijn -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 Dkjdpfx Aheb Enccs Ijn -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm Dedpfx Aed Irazoh Iokn -Weight: 25.9 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Dkjdpfxsdrwlxo Ah Ien -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with drawing cushion - Pressing force: 2500 kN Dksdjycl Evspfx Ah Ion - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Drawing cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new control cabinet, light curtain (single stroke, double stroke, safety), new hydraulics, - new seals - new UVV safety inspection

Condition: used, Year of construction: 1978, x-travel 820/850 mm y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Dkjdpfjxxb Htox Ah Isn Further techniscal detals please consider pictures

Condition: ready for operation (used), Year of construction: 1980, operating hours: 15,339 h, functionality: fully functional, grinding width: 2,650 mm, grinding length: 11,500 mm, table load: 10,000 kg, grinding height: 2,000 mm, grinding wheel diameter: 600 mm, The machine was retrofitted by the seller in 2020! Djdpfx Ahjw I Ebue Iskn The machine remained powered until 01.08.2025! TECHNICAL DETAILS Grinding Area: Maximum grinding width: 2,650 mm Maximum grinding length: 11,500 mm Maximum grinding height: 2,000 mm Maximum workpiece height: 2,120 mm Maximum distance between columns: 2,670 mm (by removing the guideways, a width of 2,750 mm can be achieved) Table size: 2,240 x 12,000 mm Maximum table load with even weight distribution: 10,000 kg/m Travel and Adjustment Ranges: Cross slide travel: 1,800 mm Vertical adjustment of universal grinding support: 450 mm Vertical adjustment of grinding support with horizontal spindle: 250 mm Head inclination: ±90° Grinding Spindle: Wheel diameter: 600 mm Wheel width: 120 mm Wheel bore: 200 mm Wheel speed: 1,000 rpm Spindle power: 30 kW MACHINE DETAILS Control: Fanuc CNC 31i Model A Operating hours: 15,339 hours EQUIPMENT Enclosure without roof

Condition: used, functionality: fully functional, WMW Ruhla FUW 315 Milling Machine + Willy Vogel Pump. Speed range [rpm]: 56 - 2800 Traverse paths [X / Y / Z mm]: 500 / 400 / 33 Equipment / Accessories: Universal table can be rotated and tilted Dksdpfov Sfausx Ah Ijn Good working condition. Please check out our other listings as well.

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Dedpfxoxnpf Ns Ah Ijkn Weight: approx 2,5 T

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Dkodpfsw Hquxox Ah Ion Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), gearing type: hydrostat, fuel type: gasoline, color: blue, Road marking machine: + Graco + LineLazer IV 250SPS + Paint tank / Bead container + Parallel spray: 2x spray nozzles / 2 bead dispensers Dedpfxsw Svqze Ah Ijkn + Hand spray unit + Hydraulic drive, self-propelled forward/reverse + Airless pump + Honda GX 270 engine, 8.4 HP Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typos possible, prior sale reserved!

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls Djdpfx Asw Uab Njh Ijkn ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm Dkodpfsu Nlatox Ah Ien three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D. *

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm Dsdpfx Aovbh N Rsh Ijkn i.D. *

Condition: used, Technical details: Dodpovgbhqjfx Ah Ijkn diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *

Condition: used, Technical details: Dkedpou Nla Hofx Ah Ien diameter: 250 mm passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm three jaw chuck made of steel flange intake Ø 210mm with 3 pcs drill hole M12x44 incl. 3 set of 3 jaws *

Condition: used, Technical details: floor-plate length: 800 mm plate width: 455 mm plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm Dkjdpfxou N Dhij Ah Ien *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Dsdpsvbhv Rsfx Ah Iekn Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: used, Technical details: width: 250 mm depth: 180 mm height: 250 mm Djdpfx Aeu N Eb Doh Iokn weight of the machine ca.: 30,0 kg 2 pieces clamping angle available (No. 1104021 A is slightly thinner) *

Condition: used, Year of construction: 1999, Technical details: floor-plate length: 5500 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 6,5 t space requirements of the machine approx.: 5,5x1,5 m - distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps Dkjdpfou N Dnvex Ah Ion i.D. *

Condition: used, Technical details: Dedju N D N Hspfx Ah Iokn weight of the machine approx.: auf Anfrage kg Diese Spannmittel werden im kg-Preis bei Gesamtabnahme verkauft. Bitte beachten Sie die Ausweisung auf den Fotos! *

Condition: used, Technical details: diameter: 250 mm passage: 80 mm width: 80 mm Dkedpjvgbhkjfx Ah Isn revolution per minute: 2400 U/min dimensions: Ø 250 x B: 180 mm incl. 3 clamping jaws mounted, max. clamping range outside: Ø 60 - 188 mm and max. clamping range inside: Ø 17 - 192 mm with base plate Ø 303 x 48 mm; outer pitch circle Ø 280 mm with 4x M16 holes; inner pitch circle Ø 134 mm with 4x M12 holes; T-slot 3x lengthwise and 3x crosswise, T-slot spacing = 64 mm Flange = Ø 248 x 13 mm Accessories: with chuck key 1 set of soft jaws *

Condition: used, Technical details: diameter: 250 mm passage: 80 mm width: 80 mm weight of the machine approx.: 23 kg dimension L-W-H: Ø 250 x 130 mm Dedpfxju Nlfie Ah Iokn 4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and face plates in stock. Please inquire! *

Condition: used, Year of construction: 1980, Technical details: x-travel: 820 mm y-travel: 300 mm z-travel: 485 mm spindle taper ISO: SK 40 spindle head swivable left - right: 0 - 45° rechts/links ° quill travel: 80 mm range of revolution per miute: 56 - 355 und 450 - 2800 U/min feed:: X/Y: 10 - 80 und 80 - 630 mm/min rapid traverse : X/Y: 3150mm mm/min Table dimensions: 1700 x 400 mm table surface area: 1120 x 205 mm total power requirement: 7,5 kW kW machine weight approx.: 2120 kg dimension machine xH: 1,7 x 1,7 x 2.5 m additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm Dkodpfx Ahjwtct Tj Ien milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates *