Used Winkler + Dünnebier (W+D) Buhrs Bb700 S2 for sale (64,768)

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm Fjdpfjk D Ewgex Ak Uepl - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, horizontal glass belt machine with roller table Fpedpfx Akeymxpvs Usl belt size : 100 x 3000 mm

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Fedpfxeziwpls Ak Uopl Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") Fpjdpfjznkx Dex Ak Uel The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Fjdpszvnfwefx Ak Uspl Automatically adjustable pneumatic foot

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 Fedpfxeh Icf Uj Ak Ujpl with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Year of construction: 2000, condition: good (used), machine/vehicle number: 84061, Offer 22629 - Air-cooled DC/AC welding system, mobile - For welding all weldable metals - e.g., stainless steel, steel, aluminum, brass, etc. - Welding current (TIG) continuously adjustable from 20 A to 270 A, 35% duty cycle - 100% duty cycle - Connection: 400 V - Includes: - Digital welding current display - Arc frequency control - HF start Fpedpfeixp D Uex Ak Uel - Pulse function - Hose package, 5 m - Pressure reducer - Ground cable - Mobile chassis - Space requirement: approx. W 550 x H 1150 / 1300 x D 950 mm - Weight: approx. 180 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 9,000 h, functionality: fully functional, Doppstadt DW3060 Bufalo pre-shredding machine, manufactured in 2015, in perfect condition, with 9,000 operating hours and ready to continue performing effectively. Fedpfxszwumqe Ak Uepl

Condition: excellent (used), Year of construction: 2012, Used 3-meter CNC press brake from Ermaksan Type: Powerbend Pro 30120 Capacity: 3100 x 120 tons Year of manufacture: 2012 Cybelec DNC 660 CNC control (2D graphic) Y1, Y2, X, and R axes CNC controlled Fjdpfx Akszzpc Is Uepl CNC crowning Euro-style tool clamping 1 set of tools for 1 to 6 mm

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Fsdpex U Eyfsfx Ak Uepl

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, grinding spindle motor power: 1,100 W, input voltage: 380 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software. Fpedpfx Akezxup Uo Ujl

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Capacity: 48 V / 465 Ah Fjdpfx Ajzv H Tyok Uopl Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm – Roller width 1516 mm – Drive power 3 kW Fedpfjzuv Dfex Ak Ujpl – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Year of construction: 2001, condition: used, Five CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Schmoll A-System 1 Twin CNC PCB drilling machine, year of manufacture: 1997. 3) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 4) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 5) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Fodpfx Akozzqc Ne Uepl

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle Fpsdpezrmk Refx Ak Uel at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Fpodpszumpxefx Ak Usl Nominal capacity: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale.

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm Fpedpfeyxr Hmex Ak Uel table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Fodpfx Aezv S Atsk Ujpl Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 Fodpfx Akozv Ru Us Ujpl ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot - PSA - Floodlights - Induction / Wire guidance

Condition: used, Year of construction: 2006, Multihead weigher with platform and conveyor. Manufacturer: Bilwinco Model: DW6014-D Year: 2006 Fedpfx Aox Rz E Njk Ujpl Power consumption: 5000 VA Weighing range: 10g - 1000g IK max : 10 KA Frequency: 50 Hz Voltage: 3 x 400V, PE Compressed air: 5 - 10 bar Equipment included : 1 x Multi-head dosing machine 4 x feet 1 x Spare parts 1 x Elevator conveyor with electrical cabinet and belt 1 x Storage trolley for washing and transporting buckets

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking Fjdpfsyc H R Tex Ak Ujpl • Device inspected (TBM inspection stickers)

Condition: used, Year of construction: 2023, operating hours: 1,500 h, Yanmar B 75 W Year of manufacture: 2023 1500 hours !!!!! POWERTILT !!!!! Full hydraulic quick coupler on the Powertilt 3 buckets Air conditioning German machine, first owner Complete piping/connections for hammer/grab/shear Tires approx. 60-70% Operating weight approx. 7200 kg Ready for immediate use Delivery possible Fpedpfxey Uqfto Ak Ujl Financing possible ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/p?????/?????... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Type: WD/ 12 Fpsdpozzi Dfsfx Ak Usl capacity / hour ca.: 6000

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Fjdpfx Akezy In To Ujpl Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Fpodpfx Akozv Ukgj Uel Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.