Used Ukb-System Trumpf Abkantwerkzeug Gesenkbiegepressen Biegewerkzeug for sale (37,906)

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) Hnsdpfjza Eu Eox Agmjn - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2008, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control system: Sinumerik 840D Hedpfx Ageza Elqomsnn Standard equipment: - Sturdy C-frame - Coordinate guidance with integrated linear magazine, 25 positions for tools and clamping jaws - 4 clamping jaws - Automatic part slide 500 x 500 mm - Drives: Maintenance-free three-phase servo motors Punch head: - Hydraulic mono-tool holder - 360-degree rotation for all tools - Automatic tool length compensation - Tool spray lubrication - 2nd lubricant tank - Programmable wiper movement - Punch slug extraction - Programmable clamping device for re-clamping with pre-selectable clamping force - Bulge detection Control system: - 10.4-inch TFT display - Simple operation - Diagnostic function - Integrated 3.5-inch floppy disk drive - RJ45 network connection Safety: - CE marking - Multi-beam light barriers - Rapid shut-off of hydraulics + Multitool function + MultiBend function + Thread forming function + Marking/fast beading function + Deburring and rolling technology + Individually opening clamping jaw + Re-clamping cylinder + Sensor for part slide + Vibration-damped installation + Automatic shut-off + Chip conveyor + MDE interface + ToolMaster 70

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard Hnsdpfx Ageza Eiiomen + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 12,113 h, pressing force: 36 t, Bending length [mm] 1020.00 Press force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Sturdy machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system Hsdpfx Agjza Dfijmenn - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows Xpe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen - Network compatible - Teleservice via modem Safety - Side-swinging safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes - Ergonomics package, including: * Comfort support table (front) * Comfort footrest * Work area lighting at the front (LED) - Productivity package, including: * Graphical workshop programming * Automatic Trumpf tool clamping * BendGuard safety device (with block laser) - Tool cabinet on the right

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 36 t, Bending length [mm] 1020.00 Pressing force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Robust machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 axis Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Hnedpfx Ajza Dczegmen Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock speed - 1 GB RAM - 15-inch touch screen Safety - Side-swinging protective doors - Rear protective cover - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting in front (LED) - 2 document holders Productivity Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser)

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting machine TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Operating hours: 59821 hours Laser beam on: 36350 hours Standard equipment: Hedpfxjza Daao Agmonn Machine - Enclosed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Working area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the internet Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with certified viewing window door on the right - Sliding roof + Nozzle changer

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Hedpfx Ageza A Hlsmsnn Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: ready for operation (used), Year of construction: 2008, laser power: 50 W, This 3-axis TRUMPF Trumark Station 5000 was manufactured in 2008. It features maximum workpiece dimensions of 680 mm x 500 mm x 700 mm and a traverse path of 500 mm on the Z-axis. The machine has a maximum workpiece weight of 50 kg without the X/Y axis. If you are looking to get high-quality laser marking capabilities, consider the TRUMPF Trumark Station 5000 machine we have for sale. Contact us for further details. Hnodpfx Agsza Albomsn - Maximum Workpiece Dimensions (W x H x D): 680 mm x 500 mm x 700 mm- Maximum Workpiece Weight: 50 kg (without X/Y axis), 25 kg (with X/Y axis)- Traverse Path Z-Axis: 500 mm- Traverse Path X-Axis: 300 mm- Traverse Path Y-Axis: 300 mm- Traverse Speed Z-Axis: 1.5 m/min- Traverse Speed X-Axis: 6 m/min- Traverse Speed Y-Axis: 6 m/min- Electrical Connection (Voltage): 115 V / 230 V- Electrical Connection (Frequency): 50 Hz / 60 Hz- Maximum Power Consumption: < 2.55 kW- Workstation Dimensions (W x H x D): 860 mm x 2000 mm x 1310 mm- Workstation Weight (without laser): 410 kg- Laser Class: Class 1- Laser Compatibility: Combined with VMc 1-6 and TruMark 7020 marking lasers

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Hnjdozcf Dlopfx Agmsn Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, functionality: fully functional, Year of construction: 2022, laser power: 8,000 W, Equipment: CE marking, cooling unit, dust extraction, safety light barrier, TRUMPF TruLaser 5040 L76 8kW TruDisk 8001 8kW SmartBeam Control Highspeed Eco cutting package Compressed-air cutting Cutting package for thick sheets Machine ambient temperature up to 45 °C Hnjdpfxjzcdfbs Agmon Technical data: Laser-specific data - TruDisk 8001 Maximum laser power 8000 W Maximum sheet thickness, mild steel 25 mm Maximum sheet thickness, mild steel 32 mm Maximum sheet thickness, stainless steel 40 mm Maximum sheet thickness, aluminum 25 mm Maximum sheet thickness, copper 10 mm Maximum sheet thickness, brass 10 mm Axis data - Maximum axis speed Simultaneous 280 m/min Working range, workpiece size - Nominal working range: X axis 4000 mm Y axis 2000 mm Z axis 116 mm

Condition: used, functionality: fully functional, Year of construction: 2004, degree of automation: manual, actuation type: electric, Equipment: cooling unit, Trumpf HL 1003D laser unit Beam quality of 12 mm mrad and a laser power of 1000W at the workpiece. 2 optics with cameras. Hodpfx Agswxq H Esmsnn

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication Hnedpfx Aoxmfc Uogmen - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, TruMatic 6000 fiber large format (K06) + SheetMaster + GripMaster + TruStore 3030 Double tower (46 Storage pallet) Full automated high-end punch laser combination machine with with all available options! Operating hours: 500 h (!) Year of prod.: 06/2022 Highlited options: Punching quality package : • MultiShear function • Deburring and roller technology function • Adaptive stroke calibration • StripLine Forming package: • Tapping function including forming tap breakage control • Marking/quick beading function • MultiBend function • Height-adjustable clamps Descending die MultiTool function Engraving function Die spray lubrication with level monitoring Chip conveyor with tipping container Loading/Unloading: SheetMaster 3000 x 1500 mm (AK04) Loading and unloading parallel to production Peeling unit including positioning aid for large sized sheets Additional positioning aid for small-sized sheets Additional positioning aids for medium-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Integrated tool changer, 40 stations Hnodow Iz N Iepfx Agmen GripMaster 3000 x 1500 mm Three scrap skeleton grippers, one of which with sensor system Parts conveyor belt for punch and laser side TruStore 3030 double tower storage system (46 pallet) • Storage equipment • Sheet size 3048 x 1524 mm • 3 t load capacity per pallet • Storage safety device • Column covering • Pallet lift (lifting chain, cable carrier) • 19" touchscreen operating panel • Storage interface for connecting two automation solutions • Instruction, documentation • Electrical cabinet lighting • CE marking and EC Machinery Directive

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 5000 press brake. Contact us for more information about this machine. Hnedpsx Imqlefx Agmjn • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: good (used), functionality: fully functional, Year of construction: 2000, Max. processing size: 3000 x 1500 mm Infeed width: 3000 mm Cutting capacity for steel: up to 20 mm, stainless steel: 10 mm Overall external dimensions: 9 x 5 x 2 m With Schmalz suction lifter up to 750 kg, year of manufacture 2018 With chain conveyor for waste transport With spare parts Hodpfszb Uukex Agmsnn Disassembly must be carried out by the buyer.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz Hnsdpfx Agszarc Ajmjn • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Fusing: 200 A Compressed air connection: 6 - 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Hnsdjzaqzkspfx Agmon Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Condition: used, Brand: SOCO MC-350 Suitable e.g. for cutting aluminum, brass, copper, PVC and carbon Cutting power tube at 90 °: 101.6 mm Cutting capacity profile, 90 degrees: 76.2 x 127 mm Saw blade dimensions: 355.6 mm automatic dosing length: 685.8 mm Hedpjgtmi Usfx Agmenn Grades: 2 Shortest cutting length (automatic): 1/4 ”6.35 mm Saw motor: 5 HP 1750 rpm Voltage: 220/3/60

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Hjdpfeyzc Rujx Agmenn

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 34,676 h, control type: CNC control, controller manufacturer: SIEMENS, laser type: CO₂ laser, laser source model: TRUMPG, laser hours: 18,409 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, working length: 6,000 mm, working width: 2,000 mm, cutting speed: 300 mm/min, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, The TRUMPF TruLaser 5060 is one of the most powerful large-format 2D laser cutting machines in the TRUMPF range, designed for processing large sheet metal (6,000 x 2,000 mm). In this case, it is equipped with a 6 kW Truflow laser source. We also offer the option of retrofitting a TRUMPF CO2 laser with a FIBER laser, using a 6000W or 12,000W RAYCUS laser source. Hjdszb Agnspfx Agmsnn

Condition: used, functionality: unexamined, Year of construction: 2006, We are offering this used TRUMPF Trumatic L3030 laser cutting machine, manufactured in 2006, for sale. Machine dimensions: approximately 550/300/200 cm, table dimensions: approximately 340/160/85 cm, consisting of: laser TLF 4000T and cooling unit RIEDEL L16/29-TR3.24, manufactured in 2006, including accessories and laser cooling unit L16/29-TR3.24. Hjdpjzbyk Rjfx Agmenn The machine is currently dismantled and was last in operation at Gast Metallwarenfabrik at the end of 2025. It was disassembled there by a specialist company that also delivers new TRUMPF machines. The machine is sold without any warranty. Loading is possible on site. Transport must be arranged by the buyer. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 Hnjdpfx Aozbugmogmsn The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, Technical specifications: Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Hedpfx Agszbuc Iomsnn Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 39,620 h, machine/vehicle number: D0004 B0405, control type: CNC control, laser power: 3,200 W, Equipment: dust extraction, For sale: a TruFlow 3200 laser cutting machine with a rotary laser or tube cutting capability. The machine is well-maintained and in good condition. A Load Master is also included. Hedpey Iy Hmjfx Agmonn

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Hodpox D Ilyefx Agmonn Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Machine still under power Dimensions Machine Depth 5000 mm Technical Specification Bending Length 4080 mm