Used Tst Braadlijn, Model Hotoilfryer for sale (18,000)

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg Gbjdeupxk Dspfx Ak Ujt dimensions 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Gbjdjziqtdspfx Ak Uot

Condition: new, Newpower Generator proudly presents its new NWK33 Soundproof Plus series. These generators are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The generator is new, complete including control system, diesel tank, exhaust batteries, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced sound insulation - Extra quiet operation - Network monitoring, network feed-in - Ready for immediate use Technical data: Model: NWK33 Soundproof Plus emergency generator Fawde Motor Newpower generator with special sound insulation Motor: Fawde 4DW92-35D, 4 cylinders, water-cooled Generator: Newpower NW/N33 Continuous output: 24 kW / 30 kVA Maximum output: 26.4 kW / 33 kVA Noise level (7m): approx. 62 dB Connection: FI protection circuit breaker, 5-wire cable connection Sockets: 1 400V x5P 63A -,1x 400V 5P 32A -,2x 400V 5P 16A-,2x 230V 2P Schuko -Sockets Gbsdjvy Awgspfx Ak Ujt Frequency: 50 Hz Voltage: 400/230 V RPM: 1500 rpm Control: Comap IL4 AMF8 Dimensions (LxWxH): 2170X930X1450mm Weight: 972 kg Diesel tank: 95 L. (possibility of connection to external tank) 100% load approx. 6.5 l/h 75% load approx. 4.8 /h 50% load approx. 3.4 l/h

Condition: new, Newpower Generator proudly presents its NWK33 emergency generator with sound insulation. The generator is new, complete including control, diesel tank, exhaust batteries, mechanical speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Gedpfx Ajvy A Edsk Usbt Technical data: Model: NWK33 emergency generator with sound insulation Fawde engine Newpower generator Engine: Fawde 4DX92-35D, 4 cylinders, water-cooled Generator: Newpower NW/N33 Continuous output: 24 kW / 30 kVA Maximum output: 27 kW / 33 kVA Connection: 4P circuit breaker, 1x5P 32A-, 2x5P 16A -, 2x2P 16A 250V sockets Frequency: 50 Hz Voltage: 400/230 V RPM: 1500 rpm. Control: Comap IL4 AMF8 Dimensions (LxWxH): 2000x930x1250 mm Weight: 900 kg Noise level (7m): approx. 68 dB Diesel tank: 95 L. (possibility of connection to external tank) 100% load approx. 7.3 l/h 75% load approx. 5.9 l/h 50% load approx. 3.8 l/h additional costs 63A automatic switch: € 571.20 100A automatic switch: € 708.05 Shipping: - Worldwide transport including unloading is possible for an additional charge - To be able to give an exact freight price, please send us an inquiry with your details and your full address

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Gbjdpfx Aozf Ibkek Uet Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: good (used), Year of construction: 1999, _Netstal Synergy 1000-460_ Clamping force: 100 t Year of manufacture: 2000 Control system: SYCAP / DSP II Screw diameter: 45 mm Screw type: PMMA Min. mold height: 250 mm Max. mold height: 550 mm Max. opening stroke: 400 mm Ejector stroke: 120 mm Tie-bar spacing (H): 460 mm Tie-bar spacing (V): 460 mm Platen size (W × H): 660 × 662 mm Gedpfxjzu R I Eo Ak Usbt Needle shut-off: No

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: BI-183/600, total length: 3,866 mm, total height: 2,841 mm, overall weight: 2,000 kg, input voltage: 400 V, track width: 600 mm, type of input current: three-phase, power: 16 kW (21.75 HP), construction width: 1,500 mm, input frequency: 50 Hz, For sale: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling, manufactured in 2009. Godpfx Akszxf Die Ujbt This machine is designed for injecting brine and marinade into meat and poultry products and is suitable for professional use within the meat processing food industry. The COOL version features a cooling system, allowing the brine/marinade to be kept at a controlled temperature during the production process. This is a significant advantage for product temperature, process control, and food safety. Technical specifications: Manufacturer: Inject Star Type: BI-183/600-C COOL Machine: Brine injector Version: with cooling / COOL system Year of manufacture: 2009 Connection power: 16 kW Electrical connection: 3 × 400 V / 50 Hz Minimum air pressure: 6 bar Maximum air pressure: 10 bar Machine number: BI1836-123 Stainless steel industrial version CE-marked Suitable for injecting beef, chicken, poultry, and other meat products with brine, marinade, or similar liquids. The machine can be inspected by appointment. Additional information, photos, and technical details are available upon request. English version for MachineSeeker: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling system, year 2009. The machine is designed for injecting brine and marinades into meat and poultry products and is suitable for professional use in the meat processing industry. The COOL version is equipped with an integrated cooling system, allowing the brine or marinade to be kept at a controlled low temperature during production.

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Gjdpoh Rm Ehofx Ak Uobt Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Condition: used, Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Delivery time: 30 working days after advanced payment Gsdeh R T Avepfx Ak Uobt

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Gedpfxoh Nqtvj Ak Ujbt Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function Gjdpfx Aevfdatsk Ujbt - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), JBT Stein TM3 batter mixer. Direct from closed fried food factory, this machine was used for making tempura batter for a line producing chicken burgers for McD. 2002 machine but the factory closed down in 2016. Gbodpfx Akju Iay Se Ujt

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro Gbsdpfx Akjd Erdrj Ust # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: good (used), Year of construction: 1997, SGT Strahlmaschinen SS-85 sand blasting machine Year: 1997 With part rotation system. Godpfx Aoznl Dnsk Usbt With dust extractor system. Under power in our warerhouse.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Gbodpfxezmqx Ij Ak Uet Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: used, ATS Tanner ATS-CE 340/30 Banding Machine Product Width: 1”-13” Product Height: up to 6” Speed/Cycles: 22-26 cycles/min. Performance: Up to 26 bandings per minute Band width: 30mm Voltage 115 V/50 Hz, 115 V/60 Hz Electrical Power: ca. 0.2 kW Gedpfxjwlgz Se Ak Ujbt Weight: 25 kg

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg Gbjdowkg Txopfx Ak Uot

Condition: used, Table size 630 x 200 mm X/Y/Z - 250/200/300 mm Gbodsyaai Ropfx Ak Ust Spindle speeds 2000 rpm Spindle taper MT 4 Automatic feeding & rapid feeding in all directions Equipped with Universal inclining table 500 x 200 mm Drilling head w/60 mm movement Rotary table 250 mm Rotary dividing table 250 mm Dividing head Vice 140 mm Collet chuck w/various collets Coolant

Condition: excellent (used), functionality: fully functional, Möhringer log and cant feeder, for singling and allocating round timber and cants to the carriage. Optimal separation even for different diameters. Complete with hydraulic unit and solenoid valves. Little use, from a small joinery workshop. Dismantled and loaded free on truck. Godjyfv A Rjpfx Ak Uobt

Condition: used, This listing is for a BioRad Model 200 / 2.0 Power Supply Gbedpfx Asxzhkwek Uot Bio-Rad Model 200 / 2.0 Power Supply provides reliable, precise voltage and current control for electrophoresis and other lab applications.

Condition: good (used), Year of construction: 2002, Plastic molds Year of manufacture approx. 2002 2x cavity Gjdpfsx Hkq Hox Ak Usbt

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Gjdpfxox N A N Ho Ak Uebt Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: excellent (used), functionality: fully functional, VERTICAL CLAMP PRESS , HYDRAULIC , model ITALPRESSE PROGRAM 30 second hand machine operation in manual and/or automatic mode with automatic piston opening timer volt. 380/50 technical data: max. useful working dimensions mm. 3000 x 1700 min. useful working dimensions mm. 250 x 340 hydraulic pump , motor power Hp 2 adjustable vertical pressure adjustable horizontal pressure movable control panel base with height adjustment overall dimensions mm 3600 x 1000 x 2340 (H) Gbjdpfxouxdprj Ak Uot

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN Gbjdpfox D Rlpsx Ak Uet • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Gsdpfjzzrutjx Ak Ujbt Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE