Used Tekno Equipment 1824613 for sale (42,394)

Condition: excellent (used), Year of construction: 2019, PROD. KAESER Iodpfxjz Dinaj Apcoig TYPE CS121 S/N 1210619 YEAR 1996 POWER (kW) 75 CAPACITY (m3/min) 11.5 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 59688 / 82105 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Iijdpezcqy Ejfx Apcjg Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure (max.): 16 bar, Adsorption dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Iiedpfjz Dlafex Apcsg Model: K-MT 35 Design: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 bar Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Machine type: Adsorption dryer for compressed air

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking Iiodezxckmspfx Apcog

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc Iisdpfx Apszzbb Nscog EQUIPMENT Remote control

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection Iisdpjz Ai Tpofx Apcsg

Condition: used, Year of construction: 2011, operating hours: 24,159 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 12 mm right 12 mm Axle 2: left 18-18 mm right 18-18 mm Iijdpfxey Uw Als Apcsg Axle 3: left mm right mm

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm MACHINE DETAILS Iiedpezy Intofx Apcog Input voltage: 240 V Dimensions & Weight Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg EQUIPMENT Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Accessories and maintenance tools

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, Universal granulator MeWa UG 1600, Drive power: 110 kW, Rotor length: 1600 mm, Feed pressure device (HNDE), Control cabinet, Iiedpfx Apsz Dcbtocsg Includes discharge conveyor.

Year of construction: 2021, condition: used, overall weight: 27 kg, terms of delivery: FCA Pegnitz Iedpfx Apez Ali Hocjig delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Iijdpfsz Antujx Apcog Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Isdozzbdwjpfx Apcoig Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Year of construction: 2014, condition: used, Power: 165 kW (225 HP) Number of cylinders: 6 Empty weight: 26.400 kg Dimensions (LxBxH): 900 x 255 x 300 cm Track width: 5 cm Serial number: 2299 Designed for heavy-duty foundation work, anchors, and geotechnical applications Hour meter reading: 2684H Equipped with wireless and wired remote controls Dual drill head Drill motor brand: Eurodrill Drill motor 1 type: RH4300 Year of manufacture: 2014 Drill motor 2, for hammer rods, type: HD5012 Year of manufacture: 2014 Drilling flushing water: 3’’ water hose External engine RPM display on the front left Rubber-coated tracks Track width: 500 mm Dual automatic lubrication Hydraulic outriggers Engine: Deutz Engine power: 225 kW Number of cylinders: 6 Operating weight: 26,400 kg Includes: 100 unused pipe clamps Overall dimensions: 9,000 x 2,550 x 3,000 mm Remarks: signs of use, Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. Isdpsz Df R Defx Apcjig The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 905312, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 4,150 mm, saw blade diameter: 250 mm, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. vertical cutting height: 2,150 mm Max. cutting width: 4,150 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Vertical cutting: Yes Iodpozzbb Ajfx Apceig MACHINE DETAILS Voltage: 380 V Current consumption: 6 A Power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 1,350 x 2,830 mm Weight: 850 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 Iijdpfxez Az Exo Apcog In very good condition. Regularly maintained and in continuous operation until today.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Iiedezx S Egopfx Apcjg Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Isdpfxez Ad Dcj Apcjig Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Ijdpezzmw Nefx Apceig Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Iisdpfx Aoz A Sypspcsg Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Iiedpozx D I Tjfx Apcog Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: excellent (used), Year of construction: 2004, PALS Label applicator (Top apply) and conveyor - ready to operate Iodpfxjzu Atae Apcjig

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Iodpfxoz Aagaj Apceig Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Iiedpfjzv Rqpox Apcog Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual If you are interested or have any questions, please do not hesitate to contact us!

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. Iiodpfx Aszzqabspceg The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: excellent (used), S016792 PROD. KÄSER TYPE ASD57 S/N 1382 YEAR 2006 POWER (kW) 30 CAPACITY (m3/min) 4.5 Iisdpsz Dhausfx Apcog PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 75176/96563 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air TANK-MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED