Used Stromab St 2500 for sale (17,525)

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Hnjdox Etdmepfx Aa Esp

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 14934810 - with test report, professionally and completely overhauled and tested, includes a 6-month warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective core unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. Attention: You are bidding on a Heidenhain UM 113 ID 325 002-03 SN14934810 inverter on an exchange basis (exchange service), professionally overhauled and tested with a 6-month warranty, 100% functional, scope of supply as shown in the photos. In both repair and exchange procedures, your defective part must be free from mechanical damage such as breakage, as these are not repairable. If such damage is present, a subsequent invoice of €1,000 incl. VAT will be issued. Hsdoy Nq Uwepfx Aa Eonp

Condition: used, machine/vehicle number: 17069, Year of construction: 2013, operating hours: 4,504 h, load capacity: 2,165 kg, free lift: 1,630 mm, load center: 600 mm, construction height: 2,750 mm, fork length: 1,095 mm, front tire size: 16x7-10, rear tire size: 23x10-12, overall weight: 6,200 kg, enginetype: Diesel, manufacturer: Combilift Hodpfxjzfd A Ro Aa Ejnp

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately Hnsdomkfuljpfx Aa Ejp The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 15,540 mm Number of bays per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 600 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 75 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack crossbars, used Material color: sendzimir galvanized I-profile: 120 x 50 mm Beam type: SLI120/14 Agraffe: 5 HK Clear width: 3,000 mm 40x locking pin, used Material color: sendzimir galvanized To secure the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate Hedpsruqfajfx Aa Eonp with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Technical data for the shelf rack upright: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x shelf rack upright, new goods Material color: sendzimir galvanized profile dim.: approx. 60 x 30 mm Incl. bulkhead and base plates The uprights are unassembled Hnjdpjpbwahofx Aa Ejp 2.490 mm high 500 mm deep Remark: The shelving uprights are supplied unassembled when ordered unassembled when ordered. For an extra charge of 7,50 € / piece plus VAT we can also preassemble the also pre-assemble the uprights. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Technical data for the pallet rack upright: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet rack upright, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 9,650 mm Depth: 1,100 mm Hnjdpfek Uuv Sox Aa Eop General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Hnjdpfx Aajyxf Tto Eop Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: good (used), Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Hsdpfx Aasylbqgs Esnp Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 2000 Outfeed roller table mm 2000 Weight kg 350

Condition: good (used), Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Hedpfx Asy Hliqsa Esnp Weight kg 350

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Hnodpoytnftefx Aa Ejp Automatic material feeding Touchscreen control panel Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Hedpfx Aaszcpkie Ejnp Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Condition: used, Year of construction: 2016, chainsaw equipped with a chain sharpener, chain feed mechanism, and output with ejectors high-speed chainsaw Hnedozb Rhmepfx Aa Eep

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW Hnedpfx Aasxt Idbe Eop temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg Hjdpfoxvitvsx Aa Eonp

Year of construction: 2008, condition: excellent (used), Miter Saw - Cutting Center STROMAB model CT 800 Year 2008 Hnsdskzhffjpfx Aa Eop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Hnjdpfx Aasx Svm Rs Eep Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: like new (used), 🧰 Product features Manufacturer: UTZ Condition: as new Material: High-quality polypropylene (PP) Color: black External dimensions: 350 × 210 × 145 mm Internal dimensions: 305 × 180 × 134 mm Volume: 7 liters Weight: 0.66 kg Special features: Euro norm, stackable, ESD - conductive Hnodpfewaa Nfox Aa Esp 💰 Price € 5,- net excl. VAT Bulk discount: on request Shipping costs: Europe-wide upon request Delivery time: Available immediately Inspection and collection: possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers always in stock (Subject to technical modifications, errors and prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic central lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem bogie axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone guard * Mixing hopper with individual control Hsdpfxjy T Ukds Aa Eonp * Hydraulic front hopper * Tamper rollers with shock absorption * Reversible slat conveyor with double slats and individual control of the conveyor belt halves * Automatic shut-off via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking mechanism * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - telematics system * Hyd. Syst. for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Base plate: Hardox 500 * Hydraulic roof profile adjustment * Two external controls incl. leveling electronics * Leveling system: Mobamatic 2+1 * FRONT-WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw conveyor 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * LIMITED SD2500WS THERMO * Hyd. Syst. for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor area * LED headlights for screed left + right * 12V socket * HEATED SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool kit * SetAssist (transport position) * TRUCKASSIST ADVANCED * Thermo hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - lift axle * prepared for * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system: Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT (G) PM * Level for screed * Holder for cross-slope sensor Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale subject to change

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Colour: Grey Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer Hnsdjwq U Dxspfx Aa Esp - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg Price: On request - Details: - └ Description: Machine is currently not working, possible problem with software Hnedpsyvf Epsfx Aa Eop - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Defect cutting function Power supply: 400 V Saw blade diameter: Ø 600 mm Machine weight: 1,820 kg Year of manufacture: 2006 Model: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2,600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Maximum cutting width: approx. 410 mm Minimum workpiece dimension: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1,000 mm Dust extraction port: Ø 100 mm Hodpfx Aasy Tt Rvj Eenp Beckhoff control with 12” touchscreen (Windows interface), 3D workpiece visualization, cutting list import via USB / Ethernet.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Defect cutting function Power supply: 400 V Saw blade diameter: Ø 600 mm Machine weight: 1,820 kg Year of manufacture: 2006 Model: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Hnjdpfex Nnd Asx Aa Esp Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2,600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Maximum cutting width: approx. 410 mm Minimum workpiece dimension: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1,000 mm Dust extraction port: Ø 100 mm Beckhoff control with 12” touchscreen (Windows interface), 3D workpiece visualization, cutting list import via USB / Ethernet.

Condition: like new (used), 2,500 m² storage racking system, Schäfer R3000, 2-3 levels Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly 2-3 levels Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and readily available. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information available on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, Hnsdpfjfiqhlox Aa Ejp and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Purchase/Sale: We are continuously looking for or offering numerous items from various areas: complete liquidation of business premises business closures fast, flexible, and efficient! We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, Hnodoy Ex T Tjpfx Aa Esp maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant