Used Stamping- And Forming Machine for sale (70,713)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Hfjdpovz Hviofx Ag Iog Total power requirement 0 kw

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Hfjdpfx Aebnnwqjg Ijg Space requirement: 620 x 380 x 1250 mm Weight: approx. 106 kg

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles Hsdpsbnnwfofx Ag Iefg recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Hodpfxjwabbvj Ag Iofg The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hfodpfx Ageyvav No Isg

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hfjdpfoyvau Eex Ag Ijg

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Hjdex Utd Ejpfx Ag Iefg Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : Hedoxya Hzspfx Ag Iefg 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Hfodpfx Asyxratjg Isg

Condition: good (used), total length: 5,000 mm, film width: 550 mm, product height (max.): 150 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular film, comprising film wrapping machine and downstream shrink tunnel. The intermittent motion tubular bag machine Flexo 500 impresses with its outstanding versatility and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household products, this machine equips you to handle any application quickly and efficiently, ideal for daily changing production orders. - Film Wrapper Hugo Beck Flexo 500 S, Year of manufacture: 2003 Workpiece dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 150 mm Length: from min. approx. 80 mm, theoretically unlimited Consumables/Film: Center-folded (half-tube) film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3 phase Rated current: 5 A Hedpfx Agsyw H Rke Iefg Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, Year of manufacture: 2002 Working width: approx. 600 mm Pass-through height: approx. 300 mm Feed rate continuously adjustable Chain rod transport, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3 phase Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 Hfjdpfxoyqxxxo Ag Ieg in good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, Complete production line for drywall metal profiles (CD/UD/CW50/UW50) for sale, ideal for anyone looking to start or expand a profitable business in the construction materials industry. ✔ Strong and reliable machines ✔ Efficient and continuous production ✔ Easy to operate ✔ Perfect for producing your own products or supplying construction material distributors The production line is in very good working condition, well maintained, and can be tested on site. This is an excellent opportunity for entrepreneurs or companies who want to enter the drywall profile market without investing in expensive new equipment. Hsdjyv R N Ujpfx Ag Ijfg Selling due to business reorganization. 📞 For more details, price, photos, or videos of the machines in operation, please contact me by phone or message.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, sheet thickness aluminum (max.): 1 mm, mileage: 509 km, For sale: machine for manufacturing roofing panels in Trapezoidal 20 profile. Processes metals with thicknesses from 0.3 to 0.8 mm or aluminium up to 1 mm. Optional decoiler (price €5,000) and stacking table (price €3,000) available for purchase. Hedpfx Aoyu H D Rsg Isfg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Roof tile forming machine, manufacturer BUD-MASZ, year of manufacture 2010, mileage 3510 km, coil width 1250 mm, without decoiler. Hedpfxjxbgl Te Ag Iefg

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Hodpfen Smg Tsx Ag Ijfg Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: new, Year of construction: 2025, PRESSING AND JOINT FORMING MACHINE MODEL; MAGRAF PK-50x40 PLUS Hjdpfognlvnox Ag Iofg YEAR; 2025 Hydraulic pressure; 4000kg

Condition: like new (used), Year of construction: 2019, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 3820 345-19, total height: 2,020 mm, total width: 855 mm, total length: 2,580 mm, type of input current: three-phase, overall weight: 270 kg, film width: 280 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 380 V, product height (min.): 60 mm, product height (max.): 200 mm, product width (max.): 70 mm, product width (min.): 70 mm, path measurement accuracy: 1 mm, nominal power: 3 kW (4.08 HP), air demand: 3.6 m³/h, height adjustment type: electric, conveyor belt length: 1,000 mm, conveyor belt width: 300 mm, roll diameter: 300 mm, roll width: 280 mm, Equipment: documentation/manual, 4 seals (sachet) packaging machine, 2 lane, for liquid and semi-viscous products. Including: Hedpoyt Iw Aofx Ag Ijfg dosing unit and outlet conveyor dry contact (5A max) for external transfer pump to feed the 30 lt hopper 2 printers Markem 8018 (one per lane) photocell for printed film easy open tear notch

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Hfsdpfedzqltex Ag Iog Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System Hodsh N Di Depfx Ag Iefg - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, The item is generally offered as project-based equipment or, depending on availability, as a demonstration machine. Manufacture bags in custom formats, fill them with your product, and seal them. Description - Excellent price-performance ratio - Easy to operate and clean - Low maintenance requirements - Made from rust-free stainless steel (1.4301) - Fully integrated control system within the packaging machine - Control via PLC with color touch display - Quick, tool-free format changeover - One format included - Technical documentation provided via regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm Hfedsq Uld Uopfx Ag Isg - Film width: 140-360mm - Bag size (LxW): 40-250mm x 50-170mm - Output rate: 15-40 bags/min (depending on unit) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Power consumption: 3.7kW / 230V / 50Hz - Air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm - Weight: 580kg

Condition: new, Year of construction: 2026, The item is generally offered as a project-based machine or, depending on availability, as a demonstration model. Produce pouches in the desired format, fill with product, and seal. Description - Excellent value for money - Simple operation and cleaning - Low maintenance requirements - Product-contact parts suitable for food (1.4301 stainless steel, NBR) - Control system fully integrated into the packaging machine - Operation via PLC, color touch display with intuitive user software - Fast, tool-free pouch format changeover Hfodpfehtrf Eox Ag Ijg - One flat pouch format included - Technical documentation provided by regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.03 mm to 0.15 mm - Film width: 180–520 mm - Pouch size (L x W): 60–350 mm x 70–250 mm - Output: 15–40 pouches/min (depending on product) - Electrical supply: 3.2 kW / 230 V / 50 Hz - Compressed air consumption: 360 l/min at 6 bar - Dimensions (L x W x H): approx. 1700 mm x 1300 mm x 1850 mm - Weight: approx. 500 kg Options: - Additional format sets - Doypack modification - Printer units (thermal transfer, hot stamp, inkjet) - Height adjustment, etc.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Hedeh Aw Rnopfx Ag Ijfg Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Hedpfx Aeq U N T Reg Iofg Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. Hedpfxef Epzco Ag Ijfg There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Hedpjyk U Ezjfx Ag Ijfg