Used Stabau Rotator for sale (7,959)

Condition: excellent (used), overall weight: 500 kg, total height: 1,900 mm, total length: 3,400 mm, total width: 1,000 mm, load capacity: 2,000 kg, Arm length 3000 mm Column diameter 406 mm Lifting capacity 2000 Kg Rotation speed 550 / 2660 U/Min Hodpfsz Sppuex Aiqofn Capacity Kg:2 ton Length: 3400mm Width: 1000mm Height: 1900mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 50-125/302 G4 centrifugal pump with a KSB electric motor. The pump is a warehouse stock item – it has never been used in an installation. It comes from older warehouse stock, so there may be minor marks on the housing resulting solely from long-term storage. The pump is offered with the original KSB carton and documentation as shown in the photos. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 50-125/302 G4 Identification number: 48817003 VC-No.: 5-927-123534 / 001 Flow rate Q: 20–80 m³/h Head H: 16–10 m Rotational speed: 2900 rpm Year of manufacture: 1995 Net weight: approx. 51 kg Gross weight: approx. 55 kg Motor data: Manufacturer: KSB Type: LS100L Power: 3.0 kW at 50 Hz Rotational speed: 2840–2870 rpm at 50 Hz Voltage: 380 / 420 / 660 V – as per the nameplate Protection class: IP55 Insulation class: F Operating mode: S1 Motor number: 149610EL022 Condition: NEW / UNUSED – WAREHOUSE STOCK ITEM. The pump has not been used. Any minor marks on the surface are due to storage and the age of the device. The scope of sale is exactly as shown in the photos – pump with motor, original KSB packaging, and available documentation. Hodpfxoz Sn Ics Aiqsfn

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a warehouse stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, virtually factory condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical specifications: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Hjdpfx Asz Sn Ipsiqjfn Rotational speed: 2950 rpm Year of manufacture: 22 Mat.-No.: 216137 Number: 9972270914 CE marking Motor specifications: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in the Czech Republic Condition: NEW / UNUSED / WAREHOUSE STOCK The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set for sale is exactly as shown in the pictures.

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Industrial design Manufactured in: Western Germany Motor specifications: Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Current: 29 A Hfedpfx Aioz Spapeqjn Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 4,800 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, Efficiency, multifunction, and safety — this laser metal cutter is a combination of three. It's time to enhance your production efficiency by 1.5 times! Wattsan 1530 can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The standard equipment set includes a 6-meter-long pipe-cutting module and the cabin, which protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 5500 kg Hfsdpfoiicxfsx Aiqen Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,800 kg, lifting height: 4,800 mm, free lift: 1,515 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, total length: 2,290 mm, drive type: Elektro, construction width: 1,126 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Non-marking Front tire size: 6.00-10 Hfsdpoz Svvusfx Aiqon Rear tire type: Non-marking Rear tire size: 5.00-8 Battery voltage: 80V Battery Ah: 150Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used forklifts, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will gladly provide you with competent and detailed advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, half cabin, load guard, full free lift, safety light, non-marking tires, lithium-ion technology, interior mirror, rotating beacon, windshield wiper, single pedal control, LED, seat.

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Hfodpfjutmw Hox Aiqon Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Hedsi Dphtepfx Aiqefn Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Hfodpfx Aisy Ehrxoqsn Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Hsdeff Hdfepfx Aiqofn Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Hfedjff Hdgjpfx Aiqjn Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Infinitely variable feed rate Infeed height remains constant Models str l with infinitely adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Hfedpfx Aieff Hdioqsn Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding unit Sanding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Hfedpfxodqzbne Aiqsn Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Hedpjdqzcvofx Aiqofn Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: new, Year of construction: 2025, Chip extraction unit ASA 1903 Mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) The extraction unit can be rotated by 180°, allowing extraction from below or above Sturdy metal fan impeller Comes standard with a high-quality chassis for better stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 110 l External diameter of extraction nozzle, inlet 203 mm Hjdpfxshk S Shs Aiqofn External diameter of extraction nozzle, outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/Depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data No-load speed 2950 min¯¹ Power consumption 1.5 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 1.92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Filter bag, chip bag Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Hfedpecnxrcefx Aiqen Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device Hjdox N A Aaopfx Aiqjfn – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Hsdpfxez Spt Tj Aiqefn Technical Specification Taper Size HSK 100

Year of construction: 2011, condition: ready for operation (used), - USED - DRILLING-MILLING MACHINE LONGITUDINAL TRAVEL: 3250 mm TRANSVERSAL TRAVEL: 500 mm VERTICAL TRAVEL: 1500 mm W-AXIS: 500 mm RAPID FEEDS: 8 m/min MIN DRILLING DIAMETER: 5 mm MAX DRILLING DIAMETER: 50 mm MAX DRILLING DEPTH: 2000 mm DRILLING REVOLUTION SPEED: 4200 rpm HEAD: ISO 50 ; ±20° ; 17 kW TABLE SIZE: 2500 x 2000 mm MAX ADMITTED LOAD: 50000 Kg HIGH PRESSURE COOLANT: 80 Bar TOOL MAGAZINE: 20 POS CONTROL UNIT: HEIDENHAIN TNC 530 WEIGHT: 45000 Kg OVERALL DIMENSIONS: 6000 x 8000 x 4300 mm ACCESSORIES: SWARF CONVEYOR ; Hfodpfxswt Er Se Aiqjn PORTABLE HANDWHEEL ; LINEAR SCALES NOTE: MAX ADMITTED LOAD ON ROTARY AND SHIFTING TABLE FOR ROTATING PIECE 30.000Kg; GUNDRILLS WITH ADAPTER BUSHES; RAPID CLAMPING PLATE 2200X2500X70 mm

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Hfedpfxezu A D Eo Aiqsn Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, has been inspected, and is in fully functional condition. It was inspected before being put up for sale. Its visual condition matches the photos – normal signs of use and storage are visible. Pump data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Hsdpoz Sn Nyofx Aiqjfn No.: 5-118-547 043/1 Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 No.: Ident-No.: 00533537 Motor-No.: 544077 Condition: used – inspected – 100% functional. For sale is the exact unit shown in the photos.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-G 50-160/1102 G4 centrifugal pump integrated with an 11 kW KSB / Klein, Schanzlin & Becker AG electric motor. The pump is used, inspected, and in working order. It features a robust industrial design and is suitable for water, circulation, and process applications. It shows normal signs of use and storage, as visible in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 50-160/1102 G4 Serial No.: 5-927-220892 / 1 Flow rate Q: 20–80 m³/h Head H: 45–38 m Rotational speed: 2900 rpm Year of manufacture: 1993 Design: block centrifugal pump Connections: flanged Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: RF 11/2-75 Power: 11 kW Power supply: 3-phase Voltage: 380 V Current: 22 A Frequency: 50 Hz Hfedpfx Aez Sn Shjiqjn Speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: F Condition: Used, inspected, and fully functional. Normal signs of use and storage appropriate for the age of the device. Weight: approx. 120 kg The sale includes the complete pump with the electric motor, exactly as shown in the photos.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. Hfodpfx Aioz Spiqjqsn CEE power plug. Chain. Storz-type discharge coupling.

Condition: used, Year of construction: 2007, Overview This Gernep Labetta 10-640 2SK is a rotary self-adhesive labelling machine for glass bottles, built in 2007 and used in spirits production. It works with a 10-station carousel and two self-adhesive labelling stations for front/body and back labels, at an output of 8,000 bottles per hour (up to 10,000 bottles per hour depending on the format). Hsdpfx Aoz Stixsiqsfn The machine comes with format parts and format documentation for 0.7 l, 0.75 l and 1.0 l glass bottles. It is dismantled and stored. Technical data - Manufacturer: Gernep - Model: Labetta 10-640 2SK - Year of manufacture: 2007 - Machine type: rotary self-adhesive labeller - Containers: glass bottles 0.7 l, 0.75 l and 1.0 l - Output: 8,000 bottles/h, up to 10,000 bottles/h depending on format - Carousel: 10 stations with rotating bottle plates and spring-loaded top centering - Labelling stations: 2 self-adhesive dispensers - Label positions: front/body label and back label - Control: Siemens TD 200 text display on a stainless steel operator panel Equipment - Inline bottle conveyor with stainless steel frame - Infeed and discharge star wheels with guides - Format parts for the 0.7 l, 0.75 l and 1.0 l bottles: star wheels, guide segments, bottle plates and centering bells - Format documentation and drawings with the settings per bottle and label position - Push buttons and selector switches for machine and conveyor on/off, fault reset, automatic fast/slow and manual mode - Digital counter display - Emergency stop and transparent safety guarding Condition Used, in good condition. The machine ran in production with self-adhesive labels on glass bottles until its dismantling and is now stored together with its format parts. Availability Available immediately. Location: Belgium. Viewing is possible by appointment.

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock Hjdpfxsz Sw N Ae Aiqefn :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting