Used Spring Manufacturing for sale (41,812)

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, We have silver container machine 3 moulds 750ml 2 cavity , 450ml 2 cavity, and 230ml 3 cavity. 15hp compressor, silver pouches manufacturing machine with 8 sizes blades, silver foil rewinding machine, pvc wrap rewinding machine, paper plate and dhone making machine. Dujdpezgr E Njfx Aahow

Condition: excellent (used), axle configuration: 2 axles, first registration: 02/1989, total length: 8,100 mm, total width: 2,500 mm, total height: 3,350 mm, suspension: steel, tire size: 445/65 R22,5, Year of construction: 1989, Equipment: ABS, = Additional options and equipment = - Leaf suspension = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 445/65 R22.5 Brakes: Drum brakes Duedpjzg H Hbsfx Aahjw Suspension: Leaf suspension Unladen weight: 4,230 kg Payload: 28,770 kg Gross vehicle weight: 33,000 kg Tipper: Rear Technical condition: Very good Visual condition: Very good

Condition: used, Various dial indicators from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125mm Scale value: 1/100 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50mm Scale value: 1/100 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50mm Scale value: 1/100mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95mm Scale value: 1/100mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 Pos8 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100mm Scale value: 1/100mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100-125 mm Scale value: 1/100mm Pos16 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos17 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos19 Manufacturer: Hommel Werke Measuring range: 200-225 mm Scale value: 1/100mm Pos23 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos26 Manufacturer: Kern Measuring range: 0 - 25 mm Scale value: 1/100mm Pos28 Manufacturer: Unknown Measuring range: 70 - 95 mm Scale value: 1/100mm Pos29 Dsdpfx Aaeyhmwqehsuw Manufacturer: Unknown Measuring range: 25 - 50 mm Scale value: 1/100mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 - 50 mm Scale value: 1/100mm Pos35 Manufacturer: Mahr Measuring range: 120 - 145 mm Scale value: 1/100mm Pos36 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos37 Manufacturer: Mahr Measuring range: 170 - 195 mm Scale value: 1/100mm Pos38 Manufacturer: Steyr Measuring range: 150 - 175 mm Scale value: 1/100mm Pos39 Manufacturer: Steyr Measuring range: 175 - 200 mm Scale value: 1/100mm Pos40 Manufacturer: PAV Measuring range: 250 - 275 mm Scale value: 1/100mm Thread measuring gauges - Micrometer gauges Gauge - Dial indicators – Measuring device, e.g. for gear measurement – External measuring tool – Plate micrometer - Fine measuring gauge - Precision measuring device - Dial indicator Dial indicator Price negotiable Price per piece € 35,-- net ex works, plus packaging costs Subject to typographical errors in all technical specifications. Sale exclusively in EU countries.

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Dodpfx Aajytrh Ejhjuw Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: good (used), mileage: 244,950 km, power: 420 kW (571.04 HP), first registration: 01/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Year of construction: 2020, Equipment: AdBlue, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, navigation system, traction control, trailer coupling, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Suspension: leaf suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 9000 kg; Steering Rear axle 1: Tyre size: 315/80R22.5; Double wheels; Max. axle load: 10500 kg Rear axle 2: Tyre size: 315/80R22.5; Double wheels; Max. axle load: 10500 kg Weights Empty weight: 12.278 kg Carrying capacity: 16.722 kg GVW: 29.000 kg Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: good Visual appearance: good Duedpfx Aozgvywjahsw Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Adaptive Cruise Control - Aluminium fuel tank - Climate control - Differential Lock - Lane Assist - Load protection grid - PTO - Radio/Cd/Audio system - Radio/CD player - Visor

Condition: new, Year of construction: 2025, rotor diameter: 950 mm, Set of shredding shafts, NEWly manufactured. These shafts are available with various blade configurations. The following are currently available: Size Hammel 450 / 650 / 750 / 850 / 950 or Arjes 750 | 850 | Impaktor 250 | Titan 900 or Lindner U-75 | U-4000 | U-95 From 5 to 11 knives per support disc are possible, 5 to 12 support discs are possible. You determine the degree of shredding, we determine the number of knives and discs for the shafts. Dedpfx Aasiwxngjhouw We are also happy to accommodate your requests. Please include your company address and contact details in your inquiries. This will allow us to prepare a quote immediately and send it to your personal email address. sv p-rt com

Condition: new, Long Reach Boom & Arm for Excavators – Custom Made up to 22 m | Dredging, Canal Cleaning & Deep Excavation | Galen Manufacturer Custom-built long reach boom and arm systems manufactured by Galen for excavators that need extended digging depth and reach. Our long reach excavator boom is engineered for dredging, river and canal cleaning, pond and reservoir maintenance, deep foundation and basement excavation, slope profiling and embankment work – any job where a standard boom simply cannot reach far or deep enough. We manufacture long reach booms made to order, with reach up to 22 m and beyond, built from Hardox and Strenx high-strength steel for the best balance of reach, durability and weight. Each long reach boom-arm system is produced with full structural calculation, so that machine stability, hydraulic flow and bucket capacity are correctly matched to the extended geometry. The result is a properly balanced long reach system – not just a longer arm – that works safely at full extension. Supplied as a complete long reach boom + arm conversion or as individual sections, including correct hydraulic piping, cylinders and counterweight recommendations. We produce for all major excavator brands and models – Caterpillar, Komatsu, Hitachi, Volvo, Hidromek, Hyundai, Doosan, Liebherr and others – with mounting matched to your exact machine. Dusdpfx Aaszfwdbjhew Typical applications: dredging and waterway maintenance, canal and ditch cleaning, deep excavation, lake and pond work, slope and embankment shaping, and reach work over water or soft ground. As a manufacturer (not a reseller), Galen offers fully custom geometry, OEM/private-label production, engineering support, and export to Gulf, Balkan, Central Asian and European markets. CE-compliant production available on request. Why choose Galen long reach boom-arm: Custom reach engineered to your machine – up to 22 m+ Hardox & Strenx construction: high strength, low added weight Engineered for stability – balanced geometry, correct hydraulics & counterweight advice Complete long reach system or individual boom/arm sections For dredging, canal cleaning and deep excavation Manufacturer pricing, structural support, worldwide shipping Send us your excavator brand, model, operating weight and target reach, and we will engineer a long reach boom-arm system sized exactly to your machine.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1982, loading space length: 12,250 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, total length: 12,500 mm, total width: 2,450 mm, total height: 2,450 mm, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1982, = Additional Options and Accessories = Duedpozfaigefx Aahew - Leaf spring suspension - Drum brakes = Notes = 1982 STAS HEAVY DUTY platform trailer with ROR axles with drum brakes, 7-leaf leaf spring suspension, robust chassis, hardwood floor, 2 heavy-duty tie-down points on the side members, 2 x 3 tie-down points in the center, loading area dimensions: 12.25 x 2.42 m (L x W), front wall height 1.05 m, 3.5-inch kingpin, unladen weight 6,390 kg, permissible total weight: 32,000 kg, tires 385/65-R22.5 (L: 7/7/12 mm; R: 8/13/13 mm), Belgian registration with valid main inspection until 03/14/2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 50% Rear axle 2: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 80% Rear axle 3: Max. axle load: 8000 kg; tire tread depth left: 75%; tire tread depth right: 80% Weights Unladen weight: 6,390 kg Payload: 25,610 kg GVWR: 32,000 kg Functional Body brand: STAS 0-3-32-B-ST55 Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: good Additional information Please contact Arne Honingh for further information.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, spring diameter: 120 mm, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Dodpfx Aaszb Dapohjuw Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D32U/8478, Offer Number: D32U/8478 Machinetype: spring coiling machine Make: WAFIOS Type: FTU 5.3 Constr. year: 2000 wire diameter: 0,8-5 mm spring diameter: 50 mm feeding length: ∞ output pieces/min: 50 Location: Outside of Europe Duodpfx Ajzd U Ihjahjw

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D32U/8477, Offer Number: D32U/8477 Machinetype: spring coiling machine Make: WAFIOS Type: FSE 23 Dujdpfx Aozd U H Rsahsw Constr. year: 2001 wire diameter: 0,35-1,6 mm spring diameter: 35 mm output pieces/min: 500 Location: Outside of Europe

Condition: excellent (used), mileage: 315,000 km, power: 338 kW (459.55 HP), first registration: 03/1996, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x6, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: orange, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1996, Equipment: ABS, differential lock, = Additional options and accessories = - Heated mirrors - Leaf spring suspension - Comfort seats, driver - Differential lock - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Tilting hydraulics - Air horn on the cab roof - Hub reduction - Radio/CD player - All-round lights - Sleeper cab - Sun visor - Power take-off (PTO) - Power take-off (PTO) - ZF16 manual transmission Djdpfxeyv Ax Ie Aaheuw = Notes = HEAVY DUTY M.A.N. 33.463DFT SLEEPER CAB 6x6 TRACTOR UNIT, FULL STEEL SUSPENSION (LAMME), REDUCTION AXLES & ZF MANUAL GEARBOX & HYDRAULIC SYSTEM! ! 460HP, EURO 2, 6-CYLINDER ENGINE!! ZF MANUAL GEARBOX!! FULL SPRING SUSPENSION!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE AN "ONE-STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,816 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Differential lock; Max. axle load: 7,500 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Reduction: External planetary axles Rear axle 1: Dual tires; Differential lock; Max. axle load: 13,000 kg; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50%; Reduction: External planetary axles Rear axle 2: Dual tires; Differential lock; Max. axle load: 13,000 kg; Tire tread depth left (inside): 40%; Tire tread depth left (outside): 40%; Tire tread depth right (inside): 40%; Tire tread depth right (outside): 40%; Reduction: External planetary axles Weights Unladen weight: 10,800 kg Payload: 22,200 kg GVW: 33,000 kg Functional Height of loading area: 145 cm Condition Technical condition: very good Optical condition: very good Further information Please contact the Sales Department for more information.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Dujdpfx Aaozd Sqaehew Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 3 production and assembly lines for rims (e-bikes) Duodpfxewulrbo Aahsw

Condition: excellent (used), Year of construction: 2018, operating hours: 15,418 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 1,520 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 245 mm, feed rate X-axis: 22 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 22 m/min, controller manufacturer: Datron, controller model: Datron Next, workpiece length (max.): 1,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 200 mm, total height: 1,970 mm, total length: 2,420 mm, total width: 2,280 mm, table width: 1,000 mm, table length: 1,500 mm, rotational speed (max.): 40,000 rpm, overall weight: 2,500 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 8 h, spindle motor power: 3,000 W, spindle nose: HSK-E25, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, For sale is a Datron MLCube high-speed milling machine, *manufactured in 2018, in very good condition and fully operational*. The machine is currently in continuous production use and can be inspected and demonstrated under power by appointment. The absolute highlight of this offer is the *high-frequency spindle, which was recently replaced and has only 8.10 hours of runtime – practically a brand-new spindle*. The next scheduled machine maintenance is not due until after approximately 1,243 additional operating hours, saving the buyer immediate maintenance costs. The Datron MLCube combines the precision and rigidity of a vertical machining center with the agility and compact footprint of a gantry milling machine. With a machining area of 1,500 × 1,000 mm and a small footprint, it is ideal for large-format sheet metal processing. The modern Datron Next control system with a 24" touch display enables intuitive operation and quick setup times. *COMPLETE TECHNICAL DATA & EQUIPMENT* Manufacturer: Datron AG, Ober-Ramstadt Model: MLCube Year of manufacture: 2018 Condition: Very good – well-maintained, in continuous production Control system: Datron Next (24" Multi-Touch Display + Handheld Control Panel B10-2) Spindle: 3 kW HF spindle, HSK-E25, 40,000 rpm Spindle runtime (new spindle): 8.10 hours – practically brand new! Total machine runtime: 15,418.17 hours Next maintenance due in: 1,243.30 operating hours (interval: 2,000 h) Travel (X × Y × Z): 1,520 mm × 1,150 mm × 245 mm Machining area: 1,500 mm × 1,000 mm × 200 mm Feed rate / Rapid traverse: up to 22 m/min Tool changer: 12-position, HSK-E25 (expandable to 24 positions) Tool holder: Schunk Tribos collet chuck incl. clamping device Lubrication: Minimum Quantity Lubrication (MQL), 5-liter ethanol tank + 5-liter reserve tank Measuring technology: Renishaw 3D workpiece probe with camera Clamping system: Vacuum table incl. vacuum pump Machine table: Mineral casting (vibration-damping, thermally stable) Installation dimensions (W × D × H): 2,420 mm × 2,280 mm × 1,970 mm Weight: approx. 2,500 kg Duodpfx Aszdruroahew Power connection: 3 × 400 V, 50 Hz *AREAS OF APPLICATION* Electronics industry: Front panels, housings, membrane keyboards, PCB milling, test adapters Aerospace: Aluminum sheet and profile machining Advertising technology / Trade fair construction: Sign machining, profile machining Medical technology: Precision parts, fixtures Automotive supplier industry: Precision CNC machining Printing industry: Hot stamping dies, embossing tools General: Prototypes, contract manufacturing, aluminum, non-ferrous metals, plastics, composites *TERMS OF SALE* Price: 150,000 € net (plus 19% VAT) – fixed price New price of the machine: approx. 200,000 € Inspection: Under power – possible by appointment Dismantling / Transport: By the buyer (crane loading possible upon agreement) Invoice: A regular invoice will be issued Warranty: None (commercial sale with exclusion of liability for defects) Reason for sale: Strategic shift to steel machining – new purchase planned If you are interested or have any questions, please do not hesitate to contact us. Inspection under power is possible at any time by appointment. Ernst Neumärker GmbH & Co. KG Lohstraße 13 58675 Hemer

Condition: good (used), Features: Manufacturer: Interroll Condition: good (used) Mounting length: 630mm Roller length: 610mm Roller diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailored solutions for your intralogistics Dodpfsfgvwlox Aaheuw For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking shelves or containers.

Condition: used, Year of construction: 2008, functionality: fully functional, MEBAeco 335 A Bandsaw Machine Technical Specifications Type: Straight cut 90° Sawing process: NC automatic Automation: Automatic series cutting Cutting range: Round material at 90°: Ø 335 mm Flat material at 90°: 500 × 335 mm Drive power: 3 kW Saw blade: 4400 × 34 × 1.1 mm Maximum load weight: 250 kg/m Year of manufacture: 2008 Duedpjzdlx Djfx Aahsw MEBAeco 335 A bandsaw machine, year of manufacture 2008, for automatic series cutting. Cutting capacity up to Ø 335 mm or 500 × 335 mm. Equipped with NC control, 3 kW drive, and saw blade 4400 × 34 × 1.1 mm. Maximum material load 250 kg/m.

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura hybrid additive manufacturing system, Lumex Avance-25. The system combines additive manufacturing (metal – sintering, SLM, LPBF) and simultaneous machining (milling) in a single process. This makes the system particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed according to one’s own discretion and based on one’s own experience. This also makes it ideal for research purposes and for developing new material and process parameters. The Lumex Avance-25 is available in a titanium specification; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6AI4V (with appropriate shielding gas supply) It is possible to build with other materials or powder types if the build parameters are developed accordingly. Details Year of manufacture: 2015 12,439 spindle hours 3,476 laser hours Possible build size approx. 250x250x180 Max. table load 90 kg Duedpey Drwvsfx Aahjw Laser power 40-400 watts (variable) Laser wavelength (nm) 1070 +/-5 Tool positions for milling tools: 20 Accessories Lumex CAD / CAM system Basic and advanced function for sintering Basic and advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for machining and quality Price has been reduced!

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Dedowvf E Depfx Aahsuw

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Duodpfsx A Hdxex Aahow Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: excellent (used), mileage: 614,915 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 7,900 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, fog lights, power assisted steering, retarder, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - High beam headlights - Intarder - Radio/CD player - Sun visor - Pre-heating automatic system = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Front axle: Steered; Suspension: Parabolic springs Rear axle 1: Twin tires; Reduction: external planetary axles; Suspension: Leaf suspension Dsdpfxjzcg Rye Aahsuw Rear axle 2: Twin tires; Reduction: external planetary axles; Suspension: Leaf suspension Weights Unladen weight: 18,240 kg Payload: 7,760 kg gross vehicle weight: 26,000 kg Condition Technical condition: very good Visual condition: very good Identification Reference number: 82

Condition: new, functionality: fully functional, Year of construction: 2026, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: Dsdpfet It Dvjx Aahjuw - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Year of construction: 2017, operating hours: 14,932 h, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption Dodpey U Hkxjfx Aahjuw • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2009, operating hours: 67,500 h, functionality: fully functional, machine/vehicle number: 2.7681.023, For sale: WAFIOS BMZ 42 CNC tube bending machine, year 2009. We are offering a CNC tube bending machine from the premium manufacturer WAFIOS, model BMZ 42. The machine has been used in production and is suitable for the precise, serial production of bent wire and tube components. Technical data: manufacturer WAFIOS, type BMZ 42, year of construction 2009, serial number 2.7681.023, operating hours approximately 67,500 h, location: Northern Italy, province of Bolzano. The machine has a robust construction and is currently still in operation and used for complex tube applications in the automotive industry. The machine is sold complete with protective casing. Used condition, machine in production, further details on condition and accessories available upon request. Machine supplied as inspected, including available documentation. Inspection possible by appointment, loading assistance provided. If interested, please contact us. Price negotiable. Dedozb U Tgjpfx Aaheuw

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Dodeyzc Ruepfx Aahouw