Used Sono Tek Ultrasonic Spray Coating for sale (4,911)

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Nwsdpfx Afjxuzyfo Sel Demonstration unit from the Glogar Technology Center, available immediately

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Installation and mobility Nodpfxox Nb E Tj Af Sswl Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. * Transport possible via forklift or crane, weather-protected seals on all openings.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Nsdpfx Afefz Aw Ho Sewl materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Njdpfjw Nadgjx Af Sswl Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Nwjdpfx Afjzu Tu Ie Sel Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control -Pump filter -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Please feel free to contact us for details and other choices. Nsdpfxed Iz Dns Af Sowl

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Nwedpfszvaz Dsx Af Ssl Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, Nedpju R S Nwofx Af Sewl radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK Nsdpjy T Ukdefx Af Sowl ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Njdpfx Aot Txbdsf Sswl Model: 619569.0 Type: 35-40 ADVANCED Condition: Used

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Nwedpfxjfy Am Ue Af Sel

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Automatic nozzle cleaning unit Nsdpfezl Sbzjx Af Sjwl 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption Nwodokwct Ujpfx Af Ssl ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 220 °C, heating capacity: 33 kW (44.87 HP), workpiece height (max.): 1,700 mm, workpiece length (max.): 1,700 mm, fuel: electricity, Compact Starter Package – Powder Coating System (Oven, Spray Booth & Wagner Hand System) For sale is a complete, immediately ready-to-use starter package for powder coating. The system is delivered fully assembled (installation and assembly are not required). On-site, only electrical and compressed air connections need to be provided. 💡 Tailored Solutions & Individual Customizations: Each package can be flexibly adapted to your specific requirements, workpiece sizes, and space conditions. Whether it’s modified oven dimensions, different extraction capacities, additional transport technology, or alternative coating systems – we precisely tailor the system technology to your needs! Package Components & Technical Data (Standard Version): 1. Electric Powder Curing Oven: - Usable dimensions (L x W x H): 2,000 x 1,900 x 2,000 [mm] (dimension adjustments possible upon request) - Thermal output: 33kW (electrically heated) - Max. temperature: 220°C - Recirculating air / Fan: 5,700 m³/h (2.2kW motor) - Equipment: 2 infeed rails for trolley systems, 2 swing doors, rock wool insulation (150mm), stainless steel thermal block AISI 316 2. Open Powder Spray Booth (mobile): - Dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Extraction capacity: 6,000 m³/h (3.0kW motor) - Filter: 4 filter cartridges + 1 absolute bag filter at the top - Equipment: - Mobile 60-liter powder container Njdpebqk Nbefx Af Sowl - Electromagnetic valves for cleaning 3. Wagner Hand-Held Powder Coating System “Sprint 2 B” - Application: Corona / Tribo hand coating - Powder output: max. 450 g/min - Processable materials: Organic, tribo, metallic, and acrylic powder coatings - Protection class: IP 64 4. Electrical Control / Control Cabinet Electronic temperature control and control of the entire system

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool Nwodpfx Aexna U Ujf Ssl - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase Nsdpoya Hvqefx Af Sewl

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Nwodpfx Afjvakdze Sol Web Inpection Progress 500 Grafikontrol

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Nodpfx Afjz Ahnrj Sswl Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: excellent (used), Year of construction: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohols. It is used for degreasing metal components contaminated with oil and chips from mechanical machining. Suitable solvents: modified alcohols Njdshg Ugijpfx Af Sewl Hydrocarbons, Class AIII (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Candle filter Very good condition (the system has been used very little) 6-month warranty Available from Service Metalclean AG System process: Spray, immersion, ultrasonic, and steam degreasing, including vacuum drying. Data: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches/hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical connection: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ €1750 EX. VAT (transport costs on request) ►►Buy It Now◄◄ This product is only sold outside Europe. ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments. This paint gun set is designed with stronger and more stable structure. Nwodpfx Asc Utdref Sjl ✨Works with any powder: Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder. ✨Optimal ergonomics: The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating. ✨Regardless of the conditions: No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment. ✨These devices can take a beating... Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment. All equipment is new, not used. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ☀️ 2 YEAR WARRANTY ☀️ *This product is only sold outside Europe.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Nodpfoy E Huxex Af Sewl

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Njdpfoxa H Ewox Af Sswl (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: used, Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at con Mixer Nsdox R Anxjpfx Af Sewl Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature : 200°C Other Sold with platform + stairs + feed hopper.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Nwjdewhbnlopfx Af Sel

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Nedexq A Hljpfx Af Sewl Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.