Used Silmo Immersion Sterilizer for sale (474)

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Bodpfxszmap Nj Amyjlk More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Bljdpfjzlz T Hjx Amyok Maximum immersion depth: 20 m Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. Bljdpfezlg Agsx Amysk The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Blodpfx Amsxv Azysyok Unused and in Original Packaging Expiry date 23rd Feb 2026 hence the price Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2010, condition: used, Article: Parts cleaning system Manufacturer: EVT Eiberger Verfahrenstechnik GmbH Type: LIMPIO - PER Yob: 2010 Solvent: Perchloroethylene Customizable work chamber design as a FRONTTOP loader Regenerable adsorption system Continuous distillation of the solvent Combined vacuum drying Immersion cleaning with recirculation system Rotary-swivel mechanism for the baskets Concentration limit sensor Touchscreen operation Remote diagnostic unit Spray system Second storage tank for solvent Cartridge filter unit with filter drying Feeding system Filling and emptying valves Connection to batch distillation unit Maintenance exhaust system Self-sufficient compressed air supply Plexiglas enclosure Connection to roller feeding system Please, contact us for getting more information and pictures on mail(at) or Bodpfxezickzs Amyjlk *

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. Bjdpfx Aevguv Usmyslk How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Bljdpfx Amoy Rk Igeysk - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2021, Overview This GALDI RG270-SDUC filling machine, manufactured in 2021, is designed for the forming, filling, and sealing of gable top cartons, suitable for ESL milk, fresh milk, cream, drinking yoghurt, fruit juice, and other liquid food products. The machine operates with a servo-driven volumetric double diaphragm filling system and a bottom-up filling process, ensuring high filling accuracy and product integrity. With a capacity of up to 6,500 cartons per hour, the system is suitable for medium-capacity dairy and beverage production lines. The unit is equipped with advanced hygienic features, including H₂O₂-based package sterilization, HEPA-filtered laminar airflow, and CIP capability, enabling extended shelf-life production conditions. Technical data  Blodpfx Amey Hxuaeyok - Capacity: up to approx. 6,500 cph - Filling volumes: 250 ml – 1,000 ml - Carton format: 70 × 70 mm cross section - Filling system: Servo-driven volumetric double diaphragm piston filler - Filling method: Bottom-up filling - Air filtration: HEPA H14 (EN1822) - Decontamination: H₂O₂ (35%) misting system - Certification: CE, FCM 1935/2004, FDA

Condition: used, Year of construction: 2024, Overview:  The ALWID KRONE-D is a semi automatic dosing filler. The machine is suitable for volumetric filling of not carbonated liquids (low viscosity up to high viscosity) for the pharmaceutical, chemical and food industry. Procedure: The ALWID KRONE-D is a semi automatic machine. The operator places the bottles on the height-adjustable worktable manually and presses the START switch at each filling valve. That way, also single bottles can be filled. As soon as the START switch has been activated, the filling valve moves down and opens. The bottle is filled. Then the filling valve closes and automatically moves up, when the adjusted volume has been reached. Now the filled bottle can be machine can be used for several different liquids, bottle shapes and bottle sizes without requiring additional format parts. As the construction is solid and clear, the format change only needs a short time. The filling volume is easily and quickly adjustable by changeable volume-adjustment rods. Immersed filling is possible, when foaming products are to be filled. The machine is movable. Technical data: Blodoxb Umropfx Amyek number of filling stations: 2, expandable to 4 diameter of filling valve:  filling volume: 100-1000 ml  machine made of: stainless steel product touching parts stainless steel, glass and plastic pneumatic connection:: R 1/2“ / 6 bar electric connection: not needed  

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data - Capacity: Up to 600 bags/hour (depending on product viscosity and format) - Volume range: 0.5L – 3L - Pressure: min. 6 bar - Bag type: Doypack with screw cap - Filling principle: Gear pump with high-precision flowmeter Blsdewiu Hkspfx Amyjk - Operation: Semi-automatic (manual bag positioning, automatic filling and capping) - Frame: Stainless steel - Cleaning/Sterilization: Integrated cleaning and sterilization functions - Control panel: Touch screen Scope of Delivery  - AIT DOYPACK semi-automatic filling and capping machine - Integrated gear pump and flowmeter - Touch screen control panel

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available. Bsdpfx Amjvdd Uueyolk  Technical Details  - Capacity: 13,000 litres per hour - Products that can be processed: beer, cider, soft drinks etc. - Max. carbonation levels 0-8 g/l CO2 - 8200 l buffer tank - CO2 content can be adjusted on control panel - Siemens S7 control panel - Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm Bledpjy Ici Rjfx Amyek > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use Blodpexhfz Hofx Amyjk BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the Avantgarde.Line series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights APT.line™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Bedpfx Amju R Syioyolk Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2006, operating hours: 67,130 h, machine/vehicle number: R77, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Bjdpfx Amewbhdaeyolk Overview of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Conse...

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Manufacturer: Siemens, heating element finned tubular heater -Type: Order no.: 2NW 3510 Instr. no.: J100 519 201 -Voltage: 220 V -Power: 1000 W -Immersion depth: 800 mm -Quantity: 2x heating element available -Price per piece -Total dimensions: Ø 122 x 910 mm Bjdpfjqn Ap Rjx Amyolk -Weight: 6.8 kg/pc.

Condition: used, Pump controller for centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Pentair Jung Pumpen, alarm device with ball immersion switch, unused in original packaging -Type: Alarm device AG10 JP44892 Blsdpsrwqb Sofx Amyok -Ball immersion switch: KT JP 46208 -Quantity: 2x alarm devices available -Price per piece -Dimensions of box: 270/250/H140 mm -Weight: 2.0 kg/pc.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV Bodoy Tkazspfx Amyelk -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg Blsdpjhu Hw Aefx Amyjk

Condition: used, Sensor, probe, immersion probe -Manufacturer: KFG Level, magnetic level sensor Bledpfx Amefylb Seysk -Type: KA-10310/3 -Dimensions: 215/150/H75 mm -Weight: 0.4 kg

Condition: good (used), Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 "-VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg Bjdpfx Ajf R Iwfomyslk

Condition: good (used), Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg Bodpfx Amoq Adpfeyslk

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm Blsdpfxoy Ti I Re Amyjk -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 Blsdpsh R Ny Eefx Amyok -Power: about 12 kW 400 V -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Condition: used, Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch -Manufacturer: KDG Mobrey, magnetic float switch ovp Bsdpfx Amsipwcpjyslk -Type: S179DB/F83 -Number: 5x float switches available -Price per piece -Dimensions: 405/120/H110 mm -Weight: 2.9 kg/pc.