Used Shelf Length: 67,300Mm/Upright 4050X1100Mm for sale (29,951)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Ledjmhh Anspfx Afajrk - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Lrjdpfeguk A Hex Afask Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Lrodpfx Afsguk Dkoajk - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) Lrjdpfx Ajmhhy Nefaek - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Ledpfjmhh Dtjx Afaork The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Lrodpsguk Dvofx Afaek - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing Ljdpfjyz T Anox Afajrk 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Lrsdpfx Afjh Izr Uoaek Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes Lrjdpfx Aeyz Rvxjfajk 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: used, functionality: fully functional, load capacity: 10,800 kg, load capacity per storage section: 2,790 kg, frame height: 3,750 mm, construction width: 1,000 mm, Good day, We hereby offer you, without obligation, a used pallet racking system (multi-location system) from Galler, model OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Model: Omega Year of manufacture: unknown Frame load capacity max. 10,800 kg Load capacity per level max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (traverse length): 3,100 and 3,400 mm Scope of delivery: - 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) - 215 beams 3,100 mm - 14 beams 3,400 mm - 14 upright impact guards, long, 985 x 120 x 55 mm (L x W x H) - 10 upright impact guards, short, 500 x 120 x 50 mm (L x W x H) - 12 floor corner protectors, green, 500 x 120 mm - 13 floor corner protectors, yellow, 450 x 110 mm - 1 floor corner protector, yellow, 450 x 180 mm - 2 upright double-row impact guards, plate 300 x 250 mm, upright height 350 mm - 24 upright load distributors 1,020 x 110 x 45 mm - 60 upright bases, as new - 21 upright bases, used, good condition - 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm - 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm Ljdpfx Aeyz A Sxefaork - Various smaller mesh shelf pieces for beams, galvanized - 1 lot of distance plates for OMEGA upright bases - 1 pallet upright connector profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operator's manual, manufacturer brochures, or other sources, for which we cannot guarantee accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 1,500 kg, Good day, We are pleased to offer, without obligation, a used complete pallet racking warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Compartment width: 2,700 mm Ledpfx Afeyz A Iteaerk Compartment load: 1,500 kg Bay load: 1,500 kg Buckling length: 1,850 mm Frame height: 3,600 mm Max. run length: approx. 179 linear meters Scope of delivery: 64 upright frames 3600 x 1100 x 100 mm (H x D x W) 100 beams 2700 x 100 x 70 mm (L x H x W) 2 beams 1850 x 100 x 70 mm (L x H x W) 16 impact protection elements for a single row racking line, 1230 x 240 x 400 mm (L x W x H) 2 impact protection elements for a double row racking line, 2600 x 240 x 400 mm (L x W x H) 22 push-through protection grid elements 3600 x 1100 x 100 mm (H x D x W) Note: The above technical data has been taken from the operating manual, manufacturer’s brochures, or other sources. We do not assume any liability for the correctness or completeness of this information. We would be pleased if this pallet racking warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Lrsdeh Dv Uqepfx Afask Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. Lrjdpfxjyf Etxs Afaok It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: used, Year of construction: 2022, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, number of blades: 5, working width: 1,250 mm, FORSTNER SLIT CUT Longitudinal Cutting and Sheet Shearing Line, Year 2022 The machine is in excellent condition and fully operational. It has undergone comprehensive maintenance, and the longitudinal slitting knives have been sharpened. The line is designed for longitudinal slitting and cutting sheets to size. The machine is connected and can be demonstrated. Longitudinal slitting into 6 strips (5 pairs of knives), with the possibility to install up to 7 pairs. Ljdex R Tt Sjpfx Afasrk Equipped with a modern S1 control system with touchscreen, allowing for easy programming of different lengths and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and performs a perpendicular, clean cut. Integrated material-saving function: the machine stops, raises the cutting knives, and the sheet is automatically fed to the shears. Complete technical documentation included. Specification: Model: FORSTNER SLIT CUT 1250 Made in: Austria Year: 2022 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Shearing: rotary shears Controller: S1 If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, We offer this used Wörner B 13 column drilling machine. Lrsdpfxoyzpype Afask Manufacturer: Wörner Model: B 13 Machine No.: 26050 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2013, IRCO Profimat bar feeder Ljdpoxxq Uaofx Afajrk Year of manufacture: 2013 Bar length: 3 m Bar diameter: 75 mm

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Lredpfx Afow U Nvpoajk Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: excellent (used), Year of construction: 1998, Panel saw Striebig Type Automat 6220 Cutting capacity : 5300 x 2200 mm Cutting height : 80 mm Horizontal cutting height : 2100 mm Year of construction 1989 Built-in suction device Manual or automatic feed 11/17/22/33 m/min Machine width 6300 mm Lredpfx Aovgnzqjfajk Year of manufacture 1989 Saw blade 300 Ø 7.5 HP motor Ready for immediate use Very good condition Digitron digital measuring system horizontal and vertical The machine has been dismantled Location Stock 2281 Raasdorf

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) Ljdpfou Nf E Asx Afasrk • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Lredpfx Afjygvnioaek

Condition: excellent (used), functionality: fully functional, load capacity per storage section: 9,000 kg, total height: 4,400 mm, total width: 2,700 mm, load capacity: 1,800 kg, frame height: 4,400 mm, frame width: 1,100 mm, For sale: a complete set of MGL HX pallet racking – a robust, proven system for standard pallet storage. The ideal solution for operational warehouses, e-commerce, and medium-duty logistics. Goods available immediately – fast delivery with no weeks of waiting. Specification: System: MGL HX Lsdpfxsywrrye Afasrk Type: Pallet racking Frames: Quantity: 400 pcs Height: 4,400 mm Depth: 1,100 mm Beams: Quantity: 3,000 pcs Length: 2,700 mm Load capacity: 1,800 kg per level Why choose this solution: ✔ Universal height – perfect for most warehouses ✔ Excellent price-performance ratio ✔ Large quantity – suitable for complete facility fit-out ✔ Immediate availability – minimize your warehouse startup time Additionally, we offer: Dismantling and installation Transport across Europe Assistance with warehouse layout planning and optimization Location: Poland Availability: Immediate Contact: Write or call – we will prepare a configuration tailored specifically to your warehouse.

Condition: excellent (used), Year of construction: 2022, total length: 1,850 mm, total height: 120 mm, load capacity: 3,000 kg, For sale: STOW cross beams in perfect condition, more than 5,000 units available -1850mm -120x50, 3000kg Lodpfx Afoxprfzoasrk

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Advanced leveling system for flatness control Cutting options Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions Ljdoyy R Rmepfx Afajrk *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 162,000 mm, total height: 2,500 mm, shelf height: 2,500 mm, shelf length: 162,000 mm, frame height: 2,500 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 23, 11 double-row and 1 single-row shelving units, Sendzimir galvanized, each with a length of 7.03 m, 2.5 m high, 0.6 m deep, each featuring 7 sections with a clear width of 0.97 m, and 7 shelf levels per section, shelf load capacity of 160 kg. - 184 frames (FR25060), pre-assembled, 2500x600 - 1127 shelves (FB097604), 970x600x40 - 88 connectors for double rows (FBDV-Set) - 22 double cross bracings (VK2510) Lodpeyy I Ensfx Afasrk - 23 load capacity signs (BSMcP) Frames pre-assembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to site / assembly location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Delivery available throughout Germany mainland, except islands! Deliveries to EU countries upon individual agreement.

Condition: excellent (used), Column Drilling Machine Lredeywhu Depfx Afask Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg