Used Renner Rsf-Pro-2-11 for sale (85,652)

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2212049506-010-0001, type of input current: AC, input voltage: 400 V, operating pressure: 3 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, protection type (IP code): IP55, rotational speed (max.): 2,900 rpm, volume flow: 50 m³/h, type of cooling: air, Used, completely overhauled pump in very good condition Fsdpfoynxifsx Ad Iogd

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Fjdowbqrtjpfx Ad Ijgd Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 2023, Former Transport. Medium swath Set of wheels 320/40 R22.5 CE / Equipment package Standard PTO shaft mounted Set of tandem axles steerable / Fedpfx Adotu Hn Tj Iegd

Condition: new, Year of construction: 2023, functionality: fully functional, tank capacity: 180 l, total height: 1,160 mm, overall weight: 37 kg, operating pressure: 11 bar, pressure: 11 bar, Compressed air tank battery consisting of: 2 x 90 liter standing compressed air tanks, galvanized 11 bar MADE in GERMANY (BWB) with fitting set for self-assembly: 2 x 11 bar safety valve with angle; 2 x 16 bar pressure gauge, sealing plug, 1 x ball valve shut-off container, 1 x ball valve each for air outlet and air inlet, 2 x ball valve for condensate outlet with extension, sealing plug, sealing tape, connecting hose. with test certificate. (containers and safety valves) Year of construction: 2023 High-quality compressed air tank made in Germany (BWB tank factory) Galvanized inside and outside in accordance with DIN EN ISO 1461 in an immersion bath Fodpoq Ul Txjfx Ad Iogd Technical data per container: -Volume: 90 liters -Overpressure max: 11 bar -Diameter: 350 mm -Container height: 1160 mm -Mass (without fittings) : 37 kg -Compressed air inlet connection: G 1/2" -Compressed air outlet connection: G 1/2" -Safety valve connection: G 3/8" -Condensate drain connection: G 2" TÜV approval free with test certificate The price stated is a fixed price including VAT. The buyer receives an invoice with VAT shown. Forwarding is possible for an additional charge. We always have a large selection of new and used compressors in stock!

Year of construction: 2023, operating hours: 48 h, condition: like new (used), The combi-steamer is virtually new and has an operating time of 48 hours, as tested in our workshop. RATIONAL iCOMBI PRO 202 TECHNICAL DATA: Connection rating: 400 V / 67.9 kW Fuse protection: 3 x 100 A Cable: 5 x 35.0 mm² Water inlet: Ø 1/2" Connection fitting: 3/4" Water outlet: DN 50 Temperature range: 30 °C to 300 °C Dimensions (mm): W 1082 x D 1117 x H 1807 Net weight: 336 kg Fjdpfoxgvkvjx Ad Iegd FURTHER INFORMATION: Temperature range: 30 °C to 300 °C Detects current conditions inside the cooking chamber Identifies product size, load, and status to determine browning Learns frequently used cooking habits Determines the ideal cooking process for the desired cooking result MyDisplay – self-adjusting, user-friendly control panel

Condition: new, Year of construction: 2026, load capacity: 2,000 kg, Equipment: foot remote control, 2000 kg welding positioner, hydraulically adjustable in height Speed: 0.05 to 0.8 rpm Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical disc, center to center: 960 mm ~ 1910 mm Dimensions with horizontal disc: 1200 mm to 1900 mm Fgsdpfozk Rkfjx Ad Iod

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( Seri Bıçak Değiştirme Sistemli), • Robust mechanical structure capable of processing high-quality aluminum profiles. • Center registration for aluminum profiles within an angle range of -45 / +45 degrees. • Easy blade group replacement system. • Easy angle adjustment with mechanical supports. • Support system adjustable for all types and brands of profiles. • Cutting speed adjustment with a hydropneumatic system. • Blade storage rack (for 4 blades). • Cutting fluid spraying system. • Max. processing diameter: 160 mm. • Max. blade size: 200 mm. • Min: 90 mm. Fgjdpfx Adeviq Rys Ied

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: Fsdpoxbhp Hjfx Ad Iegd The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Year of construction: 1998, condition: excellent (used), Dual-fuel burner Weishaupt RGL40/2-A - ZM-NR version Output: 500-3450 kW Year of manufacture: 1998 Oil flow rate: 55-290 kg/h With existing Dungs DN65 valves. Fgodpshl Inmefx Ad Ijd Worldwide shipping possible. We speak Russian! Inspection by appointment only! Preferential sale to dealers, businesses, or for export. All information is subject to change without notice, errors and prior sale excepted. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Year of construction: 2001, condition: excellent (used), Dual-fuel burner Weishaupt GL 30/2-A - Version Z: Output: 300-2150 kW Year of manufacture: 2001 Oil flow rate: 40-180 kg/h With existing Dungs DN50 fittings Мы говорим по русски! (We speak Russian!) Inspection is possible by appointment only. Fgodpfxjf Src Re Ad Ied Preferably sold to dealers, businesses, or for export. All information is provided without guarantee and subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We are happy to purchase your used boiler or burner! Of course, we will also handle all formalities. Loading is possible.

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure Fgsdpfei Igdfjx Ad Isd horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2022, condition: new, Aluminum flat conveyor belt with substructure Dim: approx. 4000 x 300mm Aluminum construction Fgodpfx Adoht U H He Ied Full-surface underlay sheet Drive: gear motor 0.18KW GEMOTEG Connection 220/400V, 50Hz Protection class IP54 Drive, motor control optional 4 pcs. machine feet for leveling, height of the conveyor belt upper edge 400mm PVC transport tape EM 10/2 0+12 PVC green hard cover Endless welded with stepped finger connection Fabric insert green Supporting side with 12 PVC cleats T40 welded on in the middle, pitch approx. 508mm Supporting side with 2 piece, flush welded corrugated edges with fabric insert, green approx. 40mm high, approx. 35mm wide. Arrangement across +35-5+220-5+35mm

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Fgsdpfx Aehh A Iyod Iod Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Fedjh Eld Espfx Ad Iegd Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator. Fedpfxehh Dbae Ad Iegd

Year of construction: 2023, condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: Fgedpjht Uzasfx Ad Ied 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction - double profile reinforced 90x45mm drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2021, condition: new, Aluminum angled conveyor incl. substructure horizontal range 1500mm Fsdpfx Asht Ux Aod Iegd Rising area 2500mm Angle in the bend: 35° Conveyor belt width 400mm PVC conveyor belt including driver and corrugated edge Drive: Motor 0.55KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wavy edge: 40x35mm (customizable) T-20 lugs - 400mm pitch (customizable) 2-layer particularly laterally stable

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete Fjdjyz Dhzjpfx Ad Iogd ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, blade width: 400 mm, Sheet Straightener / Leveler Brand: Procesos del Fleje Model: 6011-E-S2 Fgjdpfjydkz Eox Ad Ied Sheet width: 400 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa Fgodpjq U S Ahefx Ad Ijd - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) OPTION - Hydro check system - Cooling System

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps Fgedpfx Adeq U S Dio Ijd - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: used, Year of construction: 2011, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Pronar PU-1700 Snow Plough / 2011 / up to 1,930 mm working width Price: €2,090.00 net / €2,487.10 gross - Clearing width depending on operational setting: 1,680 mm / 1,930 mm - Working positions: 4 - Cutting edges: Deflectable rubber - Cutting edge shock absorption: Spring-mounted - Hydraulic control: 16-20 MPa - Power supply for marker lights: 12 V - Working speed: 10 km/h - Power requirement: 25-55 hp - Own weight: 355 kg We have a very large selection of various attachments immediately available from stock! Mr. Herden (Tel. ...) will be pleased to assist you. We are happy to provide you with a financing offer upon request. We are an official distribution and service partner of Westtech. We are an official distribution and service partner of OilQuick. We are an official distribution and service partner of Holp. We are an official distribution and service partner of Magni Telehandlers. We are an official distribution and service partner of DMS. We are an official distribution and service partner of Gierking GMT. We are an official distribution and service partner of Weber MT. We are an official distribution and service partner of Seppi M. We are an official distribution and service partner of JCB Construction Equipment. We are an official distribution and service partner of Mercedes-Benz. We are an official distribution and service partner of Iveco. Fgedpeyixr Njfx Ad Isd In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 1375 = Further information = Intended use: Agriculture Unladen weight: 355 kg Working width: 193 cm Please contact Marius Herden for further details.

Condition: used, Extraction unit Holzprofi G4000, year 2015, in less good condition, 3 kW, 45 kg Price changes reserved, subject to errors, misprints, and typographical mistakes. Fgjdpfx Aswzzdgjd Ijd

Condition: ready for operation (used), An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible. Fgjdpfx Adjwr Dwws Iod

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system HL-20000 water chiller Yaskawa servomotor Fedpfx Adjwxvl Ts Iegd Optional: air compressor