Used Reform Rb32-10 for sale (29,346)

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles Iiedpfx Aqedz Spwsusc - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: used, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 5,070 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Iisdpfezd Dukjx Aqusc

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Isdsr D Ngtspfx Aquoic Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 -Number: 2x heating controllers available -Price: per piece -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece Iedpfx Aqjx Hxcdjueic

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Iiedpfezdwfijx Aqusc Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life Ijdownz Apspfx Aqujic CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: used, Used Renishaw MP10 touch probe Isdpjzdqdxefx Aquoic Tool holder: capto C6

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Iisdpfx Aezdn H Rjquec Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Used LED industrial light from Planistar Lichttechnik GmbH. Robust industrial housing with integrated LED technology and reflector insert. Ideal for industrial lighting applications. Manufacturer: Planistar Lichttechnik GmbH Model: 10-10-Xled-3-KX-46W-POL-Daimler Device Type: LED industrial light Condition: used Available quantity: 16 units Light color: White Supply voltage: 24 V DC Power consumption: 46 W Operating mode: Continuous light or flashing mode Current consumption (continuous light): 1 A Current consumption (flashing mode): 1.5 A Protection rating: IP40 Pin assignment: Pin 1 Brown: 24 V DC Pin 3 Blue: GND Pin 4 Black: Signal 5–24 V DC (continuous light) Pin 2 White: Signal 5–24 V DC (flashing mode) Iiedpozdngqefx Aqujc Manufacturer part number: 20192171 Quantity: 16 units available

Condition: good (used), Here, we offer a handling device from ZASCHESitec. This device was used in the manufacturing of instrument panels. It consists of the following components: KBK - FPM 10 - 7.0 x 5.0 Traveling carriage - LWK 762 x 762 Iijdszdim Hopfx Aqujc Lifting module - Z-L6 - 80/1280 - 1486 Load handling device - GP10 Load capacity: 10 kg Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfezddkgjx Aqueic

Condition: good (used), Year of construction: 2006, operating hours: 104 h, machine/vehicle number: 17139, load capacity: 200 kg, overall weight: 2,760 kg, construction height: 2,000 mm, product width (max.): 1,000 mm, working height: 10,000 mm, enginetype: Electric, manufacturer: Haulotte Iisdpfx Aezff Twoquoc

Condition: good (used), Year of construction: 2020, operating hours: 246 h, machine/vehicle number: 17042, load capacity: 200 kg, overall weight: 2,770 kg, construction height: 1,990 mm, product width (max.): 998 mm, working height: 10,000 mm, enginetype: Electric, manufacturer: Airo Ijdpfxoy Hnkkj Aquoic

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, available for immediate delivery with automatic transmission, double glazing, and auxiliary heater! 8 x facelift model The ideal school bus or small group minibus for those on a limited budget. Built for Germany with double glazing, auxiliary heater, and a 24-month warranty (optionally extendable). 29 sleeper seats with folding tables ----General vehicle data: * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg * Diesel tank capacity: 160 l * AdBlue tank: 12 l Drivetrain: * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Automatic transmission * Emission standard Euro 6e * Displacement: 2,998 cm³ * Power: 110 kW / 150 hp at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Advanced Emergency Braking System) * LDWS (Lane Departure Warning System) Climate control / heating / ventilation: * Safkar roof-mounted air conditioning * Convector heaters on side panels Iiedpfx Aqszff H Douec * 1 roof hatch, manually operated * Additional Eberspächer heating unit Doors: * Door 1: single-leaf at front * Door 2: single-leaf at rear * Electrical control Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been in the market for 35 years. You can inspect and test drive the vehicles with us. You will be welcomed at our operational premises—not in some parking lot, and our business address is not a mailbox at an apartment building. Those mailboxes usually disappear after a few months.

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Iijdpfx Ajfzzhyoquec Total price 17.000 euro. Condition very good !

Condition: used, machine/vehicle number: 16771, Year of construction: 2017, operating hours: 912 h, load capacity: 1,000 kg, lifting height: 1,000 mm, construction height: 1,620 mm, fork length: 1,200 mm, overall weight: 1,644 kg, enginetype: Electric, manufacturer: Still Isdpfx Aqex Rphleueic

Condition: used, machine/vehicle number: 13983, Year of construction: 2019, operating hours: 2,208 h, load capacity: 1,500 kg, lifting height: 3,000 mm, load center: 500 mm, construction height: 2,050 mm, fork length: 1,150 mm, front tire size: 18x7-8, rear tire size: 140/55-9, overall weight: 3,097 kg, enginetype: Electric, manufacturer: Jungheinrich Iodpfx Aqjw R Ai Ioueic

Condition: used, machine/vehicle number: 11327, Year of construction: 2016, operating hours: 570 h, load capacity: 1,400 kg, lifting height: 120 mm, load center: 600 mm, construction height: 1,380 mm, fork length: 1,200 mm, front tire size: 60 - 80%, rear tire size: 60 - 80%, overall weight: 300 kg, enginetype: Electric, manufacturer: Jungheinrich Iiedpfx Aqsxul A Deuoc

Condition: used, axle configuration: 3 axles, first registration: 10/2007, color: other, Year of construction: 2007, Empty weight: 6.740 kg Iijdpfx Ajyvf Dfoquoc Axle 1: left 10 mm right 10 mm Axle 2: left 12 mm right 12 mm Axle 3: left 10mm right 10 mm

Condition: used, axle configuration: 1 axle, first registration: 01/2005, color: other, Year of construction: 2005, Empty weight: 4.130 kg Axle 1: left 15 mm right 15 mm Axle 2: left mm right mm Isdpfx Aeyvf Iwequoic Axle 3: left mm right mm We have the possibility to stack trailers! 

Condition: used, axle configuration: 3 axles, first registration: 12/2004, color: other, Year of construction: 2004, Empty weight: 8.280 kg Axle 1: left 5 mm right 5 mm Axle 2: left 5 mm right 5 mm Axle 3: left 5 mm right 5 mm Ijdpfxewl D Sbe Aqueic

Condition: used, axle configuration: 3 axles, first registration: 11/2007, color: other, Year of construction: 2007, Empty weight: 6.805 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Iodpjxr Akaefx Aqujic Axle 3: left 10 mm right 10mm

Condition: used, axle configuration: 2 axles, first registration: 08/1989, color: other, Year of construction: 1989, Empty weight: 3.500 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm righ 8 mm Axle 3: left mm right mm Isdpfxjw Sml Ae Aqujic We have the possibility to stack trailers!

Condition: used, color: other, first registration: 11/2010, Year of construction: 2016, Serial number: HSF 9010 ECO-P Iisdpjxywfbjfx Aquoc We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 11/2010, Year of construction: 2016, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Iijdpfxexywkks Aqujc Please contact us if you can't find what you are looking for.