Used Rational Ultravent Hood for sale (935)

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Pgsdpfx Asyvmq Ijf Set

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) Psdpfx Afefhbuyj Sjgt - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Hood shrinking machine, Smipack SE 550, with underframe. Year of manufacture 2008. In very good condition. Pgsdjztqgrepfx Af Sjt

Condition: used, Year of construction: 2002, operating hours: 1,628 h, 2002 | Case 1825B | Used Wheeled Skid Steer | 1628 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Pgsdpfx Ajzv Emxof Sst 💰 Buy Now for EUR 4500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 21 approved ✅ 7 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Poor general condition of the telescopic. The left lifting cylinder does not hold the load and is leaking. The seat is damaged. The right drive control is difficult to operate. The rigid piping is damaged. The right rear tire needs to be replaced. Impact on radiator and engine hood. Unable to start and keep running without booster. Missing a nut on the right rear rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41114 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L Psdpfoy H D Acjx Af Ssgt - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: new, Worktable ----- 1320 x 320 mm Spindle intake vertical ----- ISO 40 Spindle take-up horizontal ----- ISO 40 Spindle speed vertical ----- 45 - 1660 rpm (11) Spindle speed horizontal ----- 40 - 1300 rpm (12) Displacement X ----- 1000 mm Displacement Y ----- 260 mm Traverse Z ----- 450 mm Distance vertical spindle - table ----- 220~670 mm Unloading ----- 200~760 mm Milling head rotatable ----- 360° Table feed X axis ----- 20~360 mm/min Table feed Y axis ----- 20~360 mm/min Iron feed Z axis ----- 400 mm/min T-slot ----- 14 mm Pedpforzuctox Af Ssgt Motor power ----- 3 KW / 400V Weight ----- 2100 KG INCLUDING * 3-axis digital readout SINO * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE hood * ISO40 collet holder including collets * Various tools

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Pedpfxjv Sv Ene Af Sogt Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 2x compressor available -Price: per piece -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit Pgedpfxjyk Tg Ds Af Sot

Condition: new, Year of construction: 2026, warranty duration: 11 months, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. Pgedev Iqaxepfx Af Sjt TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: used, mileage: 91,540 km, power: 115 kW (156.36 HP), first registration: 10/2017, fuel type: gasoline, next inspection (TÜV): 09/2026, color: black, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, Special equipment: Pedoxiuppspfx Af Segt Business package, exterior mirrors with blind spot assist, driver assistance system: adaptive high beam assist, suspension for increased ground clearance (off-road chassis), tailgate with automatic opening and closing system, infotainment system: Remote Online, black headliner, cargo compartment package, light and visibility package, metallic paintwork, tire repair kit (Tirefit), reversing camera, heated windshield washer system, mirror package, 8.0-inch TFT color display Additional equipment: Adaptive brake light, driver/passenger airbags, active hood, traction control system (ASR), electrically adjustable and heated exterior mirrors, both sides, exterior mirrors in vehicle color, outside temperature display, front pelvis airbags (Pelvisbag), integrated turn signal in exterior mirrors, AMG Line design and equipment line, automatic headlight activation, driver assistance system: active brake assist, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: collision warning system with brake function (Collision Prevention Assist), electric windows front and rear, electric parking brake, laminated glass windshield, luggage compartment cover/roller blind, infotainment system: Mercedes me connect, Isofix child seat attachment on the rear seat, body: 5-door, Keyless Go start system, driver’s knee airbag, window airbag system, Mercedes-Benz emergency call system, model updated, engine 1.6 liter - 115 kW CAT, wheelbase 2699 mm, tire pressure monitoring system, trip computer, split-folding rear seat backrest, low emissions according to Euro 6, front side airbags, height-adjustable front left seat, passenger airbag occupancy sensor, start/stop system, storage compartment under cargo floor, bumpers in vehicle color, exterior door handles in vehicle color, underride protection, warning/status indicator for rear seatbelts, heat-insulating glazing.

Condition: used, Year of construction: 2008, operating hours: 2,715 h, 2008 | Dieci Pegasus 35.16 | Used Telescopic Forklift | 2715 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 54 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good general condition of the rotating telescopic. Only the paint is removed in some places with oxidation marks. And the fiber of the rear hood is damaged. This machine is delivered with a fork accessory. 📄 Want to see the full inspection, extra photos, or a video? Pedpfezv Eruox Af Segt Tip: The reference "41127 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Pgedozux H Aepfx Af Sot Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool Pjdpfezuzfhex Af Ssgt - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Pgedjy Ehcdepfx Af Sjt Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface Psdoxyl Ecopfx Af Ssgt ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2015, condition: used, functionality: fully functional, We have a used UFO-4-M/N-2 filter ventilation unit by Klimawent for sale – a stationary dust collector designed for air purification from dust and fumes. Device parameters: a. UFO-4-M/N-2 filter ventilation unit b. 3 hoods, 3000x1500 mm c. Ductwork installation d. Installation capacity: 10800 m3/h Pgodpfx Aszl Al Dsf Sot Very good condition, fully functional, lightly used. Local pickup only.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) Pgsdpfxswrn Efs Af Sst 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, controller model: Siemens SINUMERIK 840D, TECHNICAL DETAILS Travel in X-axis: 5,000 mm Travel in Y-axis: 3,000 mm Travel in Z-axis: 1,500 mm Max. workpiece dimensions (L × W × H): 4,000 × 2,000 × 1,000 mm Table length: 4,050 mm Table width: 2,050 mm Table height: 500 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Pjdpszyl Azjfx Af Sjgt Feed rate Z-axis: 65 m/min Rapid traverse rate X-axis: 65 m/min Rapid traverse rate Y-axis: 65 m/min Rapid traverse rate Z-axis: 65 m/min Position of milling head: vertical Tool interface: HSK 63A Spindle speed: 22,000 rpm Spindle power: 30 kW Torque: 28.6 Nm Tilting axis A: ±110° Rotational range C-axis: ±182.5° Magazine capacity: 20 stations Max. tool diameter: 100 mm Max. tool weight: 6 kg MACHINE DETAILS Control system: Siemens SINUMERIK 840D Connected power: 150 kW Dimensions & Weight Dimensions (L x W x H): 8,000 x 7,500 x 6,200 mm Dimensions of control cabinet (L x W x H): 600 x 4,200 x 2,600 mm Machine weight: approx. 78,000 kg Operating hours: 71,080 h EQUIPMENT Dust extraction hood on the milling head for connection to an on-site dust extraction system NC4 laser system for contactless tool measurement and tool breakage monitoring Renishaw RMP60 wireless probe for workpiece measurement Bellows/roller covers

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate Pgedpfxoynnczj Af Set In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm Pedpfxozv Tdxs Af Sjgt - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Pgedpozw Dcnjfx Af Sjt Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 2000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm PV - DISPLAY WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Selection of operating mode: manual drilling / drilling with feed / tapping - Infinitely variable speed adjustment - Feed rate setting - Zero point setting - Drilling depth setting - Piece counter - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode - Chip breaking mode(option, price on request) - Jump switch mode, for efficient drilling of square tubes (option, price on request) Pgodpfxoxcg D Ee Af Set Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2026, Standard features: - Robust, high-quality, and angled rotating hood for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic depth stop - Stepless speed control - Connection cable with SCHUCO plug (1.2 m) - Undervoltage release - Drill protection with electrical fuse - Thermal overload protection - Emergency stop button Weight in kg: 44 Motor kW: 0.45 Alternating current 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminum Ø 20 mm - Softwood Ø 40 mm Pgedpfx Ajihipzjf Sst - Drilling depth 60 mm - Overhang 220 mm - Column diameter 70 mm - Usable table surface (W x L) 300 x 250 mm - T-slot size, quantity 2, distance 100 mm - Dimensions, width 14/26 mm - Spindle: B 16 - Speed display: Digital - Drilling depth display: Scale - Depth stop: quickly adjustable stop ring - Feed: Manual Optional DRILLING PACKAGE 1 - Price: € 272,- - Vise [felix] 2.0 80 - Quick-release drill chuck B16 1-13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Podpfx Afei Dphtj Ssgt Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Pgjdjff Hdpspfx Af Set Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min