Used Ras 52.30 for sale (1,077)

Condition: used, Suspended crane system, DEMAG type KBK 1 Ledpehrkrtsfx Aftjhi Year of manufacture: approx. 2000 Single-rail suspended crane with single-rail crane bridge Lightweight crane system made of KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance between longitudinal travel rails: 4.1 meters Total length of longitudinal girders: 12 meters Girder profile for transverse bracing: KBK1 Girder profile for longitudinal travel rails: KBK1 Consisting of: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) 1 unit of travel carriage for crane suspension 2 units of double travel carriages for the longitudinal travel rails 10 units of screw claws for crane suspension or ceiling mounting (without girder clamps) 6 units of end caps suitable for the KBK1 travel rails

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg Lodpfx Afsxclfzstehi

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) Lsdpfx Asv Ebf Hjftshi - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF RA 110 3+3 E 6 CATERPILLAR Year of construction: 2003 Caterpillars: 6 Lhjdpop Analefx Aftji Diameter: Min 20mm Max 170mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Lsdpjtia Hhsfx Aftohi

Year of construction: 2001, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 180 mm DISTANCE BETWEEN CENTRES: 1600 mm MAX GRINDING LENGTH: 1100 mm MAX ADMITTED LOAD: 150 Kg GRINDING DIAMETER: 300 mm X-AXIS TRAVEL: 350 mm Lodpfjyry Rxjx Aftshi Z-AXIS TRAVEL: 1250 mm GRINDING WHEEL SIZE: 610 x 120 x 203,2 mm MOTOR POWER: 11 kW CONTROL UNIT: FANUC 18i0 TA WEIGHT: 8400 Kg OVERALL DIMENSIONS: 3380 x 2200 x 1800 mm ACCESSORIES: PAPER FILTER ; PORTABLE HANDWHEEL NOTE: GRINDING WHEEL AUTOMATIC DYNAMIC BALANCER; ARTICULATED SUPPORT FOR GRINDING WHEEL CHANGE; GRINDING WHEEL FORMING SYSTEM; CUTTING IN AIR DEVICE; MARPOSS UNIMAR DIAMETRAL AND AXIAL HEAD

Condition: used, Year of construction: 1998, Year:1998 Condition: good Configuration: - jogger Polar RA-4 - size: B1 - left + right - pressing adjustable - air table Lodeww Ex Hspfx Aftshi Specification: - max. size: 70 cm x 100

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil New oil filter New exhaust separators Ledpfx Ajyc Ht Ieftohi Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Caterpillars: 4 with synchronous drive Lhedewqym Eepfx Aftji Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Lhedpou Eumhjfx Aftoi

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 Lhsdpsxy I D Uofx Aftji etc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,000 h, SIEBOTEC TERRA SELECT T5, model year 2012, in perfect condition and ready for work, with 6,000 operating hours. Ledpfx Ajy Szx Eoftshi

Condition: used, functionality: fully functional, Italprasse SR 3/100 frame press Lhsdpfx Afszmh Rzetji Working length: 3000 mm Working height: 1800 mm 3 vertical cylinders 2 horizontal cylinders

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: JB00001227, Bonfiglioli Trasmital / GE Renewable Energy Wind Turbine Yaw Drive Planetary Gearbox Lhjdoznu Rqepfx Aftei We are offering Bonfiglioli Trasmital yaw drive planetary gearboxes manufactured for GE Renewable Energy wind turbine applications. A total of 48 identical units are available in stock. The listed price of USD 5,000 is the price per unit. Buyers may purchase one unit or any required quantity. There is no obligation to purchase the complete stock. These gearboxes are used in the yaw system of a wind turbine to rotate and position the nacelle according to the direction of the wind. The high reduction ratio converts the electric motor input into low-speed, high-torque rotational movement required for controlled nacelle positioning. Some units may have been partially disassembled for easier and safer transportation. For example, the electric yaw motor may have been separated from the mechanical gearbox. All corresponding components are complete, and the separated parts can be reassembled. Technical specifications: Manufacturer: Bonfiglioli Trasmital Application: GE Renewable Energy wind turbine yaw system Product type: Yaw drive planetary gearbox GE part number: 448W3942P001 Bonfiglioli VMN: JB00001227 VSPN: 448W3945P001 VN: J38617101 Gear reduction ratio: 1:1146 Country of manufacture: Italy Year of manufacture: 2020 Recommended gearbox oil: Shell Omala S4 GX 220 Oil quantity stated on the identification plate: Approximately 23 litres ±10% Available quantity: 48 units Price: USD 5,000 per unit Minimum order quantity: 1 unit The products may show signs of long-term storage and transportation, including paint wear, dirt, minor surface oxidation and corrosion on exposed machined metal surfaces. The units are offered in their current condition as shown in the photographs. The components are complete. However, the electrical and mechanical testing status should be confirmed before purchase. Completeness of the components should not be interpreted as confirmation that every unit has been functionally tested. Individual serial numbers, additional photographs, dimensions, weight information and detailed scope of delivery can be provided upon request. The units are available for individual or multiple-unit purchases. Customers may order any quantity according to their requirements. Price: USD 5,000 per unit Available stock: 48 units Minimum order quantity: 1 unit Delivery terms: FCA seller’s warehouse, Türkiye, Incoterms® 2020

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Ljdpfxjyw H H Sj Aftjhi Clearance 400 mm Water heating

Condition: excellent (used), Year of construction: 2005, GRASSAIR DBX50 adsorption dryer Lhodpfxozm Iqze Aftsi Capacity: 11,000 l/min Year of manufacture: 2005 The dryer is in perfect working order; we provide service support. Net price: 7,200 PLN Gross price: 8,856 PLN

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 06/2027, Fifth wheel height 1,150 mm, hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male threaded pressure, 1'' female threaded return line. Axles: BPW On Road Eco Air, lift axle on axle 1, EBS 2S/2M KNORR, JOST steel fifth wheel, closed side underrun protection painted RAL 9010 white, 2 LED work lights behind axle 3 and in front of support legs, 1 x LED work light in the interior, front top, steel rims with black wheel hubs, 6 kg fire extinguisher, 3-meter ladder, wireless remote control for ground, shovel and broom holder, 2 toolboxes in the overhang, 15-meter air hose with hydraulic reel and gun, hydraulic hoses 4400 mm, self-supporting chassis, aluminum body 3/2 mm, walkway on the front with 2 ladders, door in the front wall on the left with ladder, floor type 10 mm, aluminum mobile wall with tarpaulin 3800 g and rail cleaner, rear doors with two integrated locking rods each, 18 mm, reinforced door seals, rear upper cross member can be unlocked on the right side by means of a pin, pneumatic door release, white roof tarpaulin 650 g with lateral reinforcement 200 g on 600 mm, 12 pairs of lashing rings, wear plates on rear side walls 3 x 1.5 m, lashing straps integrated into the side wall with stainless steel ratchets, side protection tarpaulin RAL 7038 left. Lhjdpfx Afoyw Dx Estji

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Saddle height 1,150 mm, hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male threaded pressure, 1'' female threaded return line. Axles: BPW On Road Eco Air, lift axle on axle 1, EBS 2S/2M KNORR, JOST steel fifth wheel, closed side impact protection painted RAL 9005 black, 2 LED work lights behind the 3rd axle and in front of the support legs, 1x LED work light in the interior, front, upper. Steel rims with black wheel hubs, 6 kg fire extinguisher, 3-meter ladder, wireless remote control for the ground, shovel and broom holder, 2 toolboxes in the overhang, 15-meter air hose with hydraulic reel and gun, hydraulic hoses 4400 mm, self-supporting chassis, aluminum body 3/2 mm, walkway on front end with 2 ladders, door in front wall, left side, with ladder, floor type 10 mm, aluminum side wall with tarpaulin 3800 g and rail cleaner, rear doors with two integrated locking bars (18 mm each), reinforced door seals, rear upper crossbeam can be unlocked on the right side by means of a pin, pneumatic door release, black roof tarpaulin 650 g with side reinforcement 200 g on 600 mm, 12 pairs of lashing eyes, wear plates on side walls at the rear 3 x 1.5 m, black lashing straps integrated into the side wall with stainless steel ratchets, side protection tarpaulin RAL 7038, left side. Lhodpfxjyw Dxxe Aftoi

Condition: excellent (used), RUWI Kombi-Unterflurfräse – Professional Under Table Router – Made in Germany Manufacturer: RUWI GmbH (Germany) Model: Kombi-Unterflurfräse Year of manufacture: 2013 Power supply: 230 V / 50 Hz Price: €1,750 (Negotiable) Professional RUWI under-table router, manufactured in Germany. A robust and precise machine designed for professional woodworking, furniture production and joinery workshops. Features • Original RUWI machine • Heavy-duty steel construction • 230 V power supply • Smooth and precise operation • Suitable for profiling, grooving, edge shaping and general routing work • Compact design with high stability • Made in Germany Condition • Fully functional and ready to work. • Well maintained. • Can be inspected and tested before purchase. Ledpfjzmunysx Aftehi

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, GRASSAIR RLR 40E V9 screw compressor (ATLAS COPCO screw module), machine with frequency converter, recently serviced. Technical data: capacity: 5.60 m3/min (5600 L/min); 30 kW motor; maximum pressure: 9.7 bar; operating hours: 8126 h; year: 2011; compressor in fully working condition; net price: 13,200 PLN gross price: 16,236 PLN Link to video below. Ljdpfezmt Dajx Aftehi

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Ljdpfx Afjhmbhqstshi Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted Lhsdpjg Iihwsfx Aftei bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0329, pressing force: 350 t, pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec Ljdpofxygzofx Aftshi speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

Condition: new, Year of construction: 2018, machine/vehicle number: DF0116 - Rev.00, pressing force: 110 t, pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm Ljdpfjdxvflsx Aftjhi pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

Condition: new, machine/vehicle number: DF0279, pressing force: 1,000 t, pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Lhedpsfxyiyjfx Aftji Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll