Used Radio Transmitter Rt100 /St1 + Rt 100 /St2 for sale (38,043)

Condition: good (used), • Model – FMF 100 Ijdpfx Ahsuqma Ajyebc • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Year of construction: 1987, condition: used, machine/vehicle number: 34, Max. pulling force: 10 tons Max. stroke: 1000 mm Ibsdpond Dmsfx Ahysc Cutting speed: 7.5 m/min Return speed: 24 m/min Weight: 6.2 tons The machine is suitable for cleaning tubes.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Ibodpfx Aey Hkd Hohyoc Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Ibedpfjz Spfrsx Ahyoc Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 5,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, table length: 1,500 mm, table width: 1,500 mm, feed length W-axis: 900 mm, workpiece weight (max.): 5,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Iedpfx Asfk I Niehyobc Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: new, STRUERS Grinding and Polishing System Ibedpfx Aoz Srm Nshyoc Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ibedpfewnhkmsx Ahyjc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rated load capacity 1600 kg at a 500 mm load center distance Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Ibjdpfxsz S U S Uj Ahyoc Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: good (used), fuel type: diesel, color: white, Year of manufacture: 2017 Operating hours: 2.560 Lifting capacity: 550 kg CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information Knikmops 100 * 2017 * Diesel * 2560 working hours Ibedpfx Ahjx I Rbnsyec * 2 meter lifting height * 550 kg lifting capacity * Hydro quick change * extra functions * including Dutch registration

Condition: refurbished (used), Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480 Iedpfofpa Ngex Ahyebc

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 3,400 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, Equipment: CE marking, ORMA NPC 6/100 Veneer Press Shelf length: 2500 mm Shelf width: 1300 mm Number of loading cycles: 3 Automatic pressure increase Safety cable (“breakaway” cable) Hydraulic press with heating via water from the central heating system Working pressure: 350 bar Press with 6 cylinders Cylinder diameter: 85 mm CE certified Machine dimensions: 340x165x255 cm (H) Isdsz Nvd Tepfx Ahyobc Machine weight: 6000 kg

Condition: used, empty load weight: 4,190 kg, maximum load weight: 13,810 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, 800 mm aluminum side walls, surcharge for ramps €800, -- misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Iodpfx Asz Stnzjhyebc

Condition: used, empty load weight: 6,050 kg, maximum load weight: 23,950 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2006, suspension: steel, tire size: 235/75R17,5 143/140J, color: other, gearing type: other, front tire size: 235/75R17,5 143/140J, rear tire size: 235/75R17,5 143/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Iedpfsz R Tkhex Ahyjbc

Condition: used, Year of construction: 1994, CNC press brake Ijdjyvfkljpfx Ahysbc Manufacturer: Blemas Type: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 121026

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Ijdpfx Ahezt Dy Soysbc Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Iodpoz Rxg Hofx Ahyobc Driven Tools No

Condition: like new (used), Year of construction: 2012, functionality: fully functional, overall weight: 9,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Dieffenbacher PO100 Pressing force 1000 kN / 100 tons Approach speed max. 300 mm/s Working speed max. 14 mm/s Connected power 30 kVA Stroke max. 500 mm Dwell time 95 ms Safety clearance 190 mm Iedpfxsz Rzkhj Ahyjbc Tool height min. 200 mm, max. 700 mm Tool weight max. 1000 kg Tool length max. 1000 mm Tool width max. 700 mm Weight of upper part max. 500 kg Other: Light barriers, Siemens control system In top condition!

Condition: good (used), Pressure transmitter, Endress+ Hauser – used: Price per unit, ex works: €95.00 (net)! Manufacturer: Endress+ Hauser Type: unknown / will be provided later Year of manufacture: unknown / will be provided later Available quantity: to be determined Condition: good Iodoz Sdxrepfx Ahyjbc Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, Hardy Type: Hardy TH453-W2E-II Iedpfozv Rrmox Ahyobc Never used (exhibition model) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes and comparable applications. Technical data Number of test chambers: 2 Operation of test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Ibedpszgtahjfx Ahyoc Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate testing chamber For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerant that complies with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Ibsdpfx Asy H Hk Ashyjc 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Scope of delivery: CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Ibsdpozimb Dsfx Ahysc Max. swivel angle: ±50° Servohydraulic control Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Ijdpfx Aszntunjhysbc Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Iodpfx Asy Hkgbohyebc Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Dimensions of the test chamber: Width 1050 mm, Height 1400 mm, Depth 1600 mm Volume of the test chamber: approx. 2240 l Cable feed-through opening: 2 x 100 mm on the right 2 x 100 mm on the left Temperature range: -40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet 1" internal thread Cooling water shut-off via solenoid valve when the unit is OFF Fault indication in case of refrigeration machine failure Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Outlet temperature approx. 22 °C (approx. 27 °C in continuous cooling) Ibodozizg Uopfx Ahyec Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuses: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right sides of the test chamber Exhaust connection: DN 100 mm plug-in system Safety device: Electronic overtemperature protection, permanently set Flue gas monitoring with audible alarm Viewing window: Five-pane glazing 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.