Used Polymer Laboratories Evaporative Light Scattering Detector for sale (20,043)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Hodpfx Aei Rixksf Sou Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037806, empty load weight: 7,960 kg, maximum load weight: 31,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: black, Archive photos shown. Vehicle may still be in operation. Fliegl Lightweight 50 m³ Tipping Semi-Trailer Hodpfxszlz Uws Af Ssu Lightweight high-strength fine-grain steel chassis with swan neck and replaceable 2" kingpin. 24 t two-speed landing gear, aluminium side underrun protection, foldable rear underrun guard, integrated stone-resistant mudguard supports and two rear towing hooks. Axles & Suspension: SAF 430 mm disc brake axles, laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption, air suspension, automatic front lift axle with forced lowering and traction aid, electrically controlled from the truck, hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS (24 V), raise/lower valve, Vehicle Stability System (RSS), automatic tipping lowering valve, axle load monitoring via EBS CAN bus (display in tractor unit). Tyres: 385/65 R22.5 tyres on factory silver steel rims with TPMS (ECE R141), displayed via the truck's EBS system. Electrical: 24 V lighting system, LED rear lights, LED side marker lights with integrated flashing function, LED front position lights, LED rear outline marker lights, 2 × 7-pin and 1 × 15-pin front sockets, two integrated rear LED work lights. Hydraulics: Low-pressure tipping cylinder (max. 170 bar), hard-chromed first stage, operated via truck PTO, HDK hydraulic coupling (NW 48 mm). Body: Lightweight steel body made of highly wear-resistant HB400 steel with external hydraulic cylinder mount. Folding aluminium tarp protection, external shovel and broom holder, front access ladder. Side walls 4 mm, floor 5 mm. Membrane tailgate with split rear doors (50/50), grain hatch in the right door, external locking bars and mechanical lower locking. Rear platform with ladder and spacious air/electrical connection panel. Side roll-over tarp with central locking. Approval & Finish: Germany, EC type approval (2007/46), EN 12642 body certification, 24/7 service hotline, prepared for single-line licence plate, ECE R70 warning plate, foldable "A" warning plate for waste transport, ECE R48 contour markings. Chassis painted DB 7350 Nova Grey (10-year anti-corrosion warranty), black-coated landing legs, body in RAL 9005 Jet Black, tarp in RAL 7035 Light Grey. Archive photos shown. Vehicle may still be in operation.

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Manufacturer: Pendraulik-Ruhrwerk Hsdpfxoxp Hw Eo Af Seu Model: LD-50 Max 8,400 rpm

Condition: ready for operation (used), Beckmann coulter SX4750 Rotor Max Rpm 3750 680 g Good working condition. Hsdpoxtagbjfx Af Seu Please check out our other listings as well.

Condition: used, Specifications Ilmvac Model: LVS 105 T-10 ef Free Air Displacement, l/min. 60/50Hz: 20 / 17 Ultimate Vacuum Pressure, torr: 1.5 Maximum Vacuum, in. Hg: 29.86 Tubing needed, I.D. in. (mm): 1/4 (7) Hjdpexx Na Uofx Af Seu Weight, lbs. (kg): 21 (9.5) Power (Kw): 0.83 Input Voltage / Frequency: 90V – 260V, 50/60 Hz Good working condition. Please check out our other listings as well.

Condition: good (used), Sartorius SYNUS10 Metal detector checkweigher Hjdpfxexukuls Af Ssu Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Hjdpfx Afjxurpws Ssu Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Hsdpfx Afjzargne Ssu Note: Water bath and granulator can be purchased for an additional charge.

Condition: good (used), Year of construction: 2018, Loma IQ4 2018 Model Head aperture is 350mm wide x 250mm high Useable Height is 200mm Conveyor Length 2.0m Interlock & Low Air Pressure Modular Blue belt Hodpfx Afey Smlks Seu 4-Tier LED Lamp & Sounder Stop On Detect System Handing is Right to Left Single Phase Power

Condition: used, SICK Safety Light Curtain C40S-1301AA030 + C40E-1301BH030 Manufacturer: SICK Condition: Used, good condition Type: Safety Light Curtain Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Product series: C4000 Protective field height: 1350 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Protection class: IP65 Connection type: M12 connector Supply voltage: 24 V DC Hedpfjzcw Dwex Af Seu Application area: Personnel protection on machines and automated systems Quantity available: 4 pieces

Condition: used, SICK Safety Light Curtain C40S-1001AA030 + C40E-1001BH030 Hodpszcw S Uofx Af Ssu Manufacturer: SICK Condition: Used Type: Safety Light Curtain Transmitter: C40S-1001AA030 Receiver: C40E-1001BH030 Product Series: C4000 Protective field height: 1050 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Degree of protection: IP65 Connection type: M12 connector Supply voltage: 24 V DC Application area: Personnel protection on machines, production systems, and automated production lines Feature: Non-contact safety device

Condition: new, New safety light barrier from REER. The original packaging was only opened for taking photographs. Manufacturer: REER Product series: EOS4 Hsdpfx Afszcgzro Seu Type: EOS4 301A Device type: Safety light barrier Scope of delivery: Transmitter (emitter) and receiver Number of light beams: 1 Safety category: Type 4 Performance Level: PL e Safety level: SIL 3 / SILCL 3 Protection class: IP65 / IP67 Connection: M12 connector Restart: Automatic

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 135 mm, total width: 770 mm, total height: 80 mm, total length: 1,900 mm, construction width: 770 mm, construction height: 80 mm, roll spacing: 75 mm, overall weight: 20 kg, roll length: 500 mm, TAF item number: 1000005921 Manufacturer: TAF - Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,900 x 770 x 80 Hsdpfsycipxex Af Ssu Width incl. side panel in mm: 570 Side panel height in mm: 70 Conveyor width in mm: 500 Conveyor height in mm: 80 Substructure: none Curve (degrees): 90 Curve radius, inside in mm: 800 Curve radius, outside in mm: 1,335 Support roller axle type: threaded rod Support roller diameter: in mm 50 Support roller per axle: 3 Support roller material: plastic Roller pitch, inside in mm: 75 Roller pitch, outside in mm: 135 Drive: gravity Net weight in kg: 20 Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 97 mm, total width: 440 mm, total height: 65 mm, total length: 1,550 mm, conveying length: 1,425 mm, construction width: 440 mm, construction height: 65 mm, working width: 395 mm, Item no.: 1000003711 Used light roller conveyor curve 45° not driven Technical data: Overall dimensions: approx. 1,550 x 440 x 65 mm (LxWxH) Width incl. cheek: 440 mm Hodpfegqf U Dox Af Sou Cheek height: 60 mm Conveyor length: 1,425 mm Conveyor width: 395 mm Curve (degrees): 45° Curve radius, inside: 630 mm Curve radius, outside: 630 + 440 mm Roller type: Plastic Rollers per axle: 2 pieces Castor length: 195 mm Castor pitch, inside: 55 mm Roller pitch, outer: 97 mm Castor diameter: 50 mm Drive type: Gravity Special features: run-out piece, straight, roller spacing 125 mm, 3-4 rollers per axle Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: Hodpfxjtuch Eo Af Sju - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Hjdpfx Ajtwn E Uef Ssu Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Hjdpsupyn Rofx Af Seu

Year of construction: 2014, condition: excellent (used), functionality: fully functional, METTLER TOLEDO GARVENS XE 3 CC | Dynamic checkweigher with metal detector (CombiChecker) Manufacturer: METTLER TOLEDO GARVENS GmbH Model/Type: XE 3 CC Serial number: 35005097 Year of manufacture: 2014 Power supply: 230V / 50 Hz Pneumatic supply: min. 500 kPa (5 bar) Weighing range (Max): 500 g Weighing range (Min): 100 g Verification interval (e): 0.5 g Reading interval (d): 0.5 g Hodpfezgxz Rsx Af Seu Maximum belt speed: 30 m/min Maximum throughput: 50 pcs/min Accuracy class: XIII(1) Operating temperature range: from 0 °C to +40 °C The METTLER TOLEDO GARVENS XE 3 CC professional combined system (CombiChecker) is a top-of-the-line “2-in-1” inspection device that combines the function of a precise dynamic (flow) checkweigher with an advanced Safeline metal detector. The machine is specifically designed for demanding production lines in the food, processing, meat, and confectionery industries, where meeting HACCP, IFS, BRC, and FDA quality standards is crucial. Thanks to its compact design, the system occupies minimal space on the line and allows for the simultaneous execution of two critical control points (CCP). The first module – the integrated Safeline metal detector – reliably identifies all metallic contaminants (both ferrous, non-ferrous, and stainless steel), protecting consumers and the brand’s image from costly complaints. The second module – the Garvens dynamic checkweigher – verifies the weight of products within a range of 100 g to 500 g with an accuracy of 0.5 g in a fraction of a second, automatically rejecting under- or over-filled packages. The central control system allows for quick changes in product assortment and archiving of production statistics.

Condition: excellent (used), functionality: fully functional, LOCK INSPECTION SYSTEMS MET30+ | Industrial conveyor metal detector Hedpfx Afszdb Ebj Seu Manufacturer: Lock Inspection Systems Model/Type: MET30+ 3f Overall dimensions: 3000 x 1100 x 1900 mm Belt width: 600 mm Detection aperture dimensions: 620 x 270 mm The MET30+ 3f is a professional, industrial metal detector from the British brand LOCK INSPECTION SYSTEMS (now part of the renowned Loma Systems group), representing a technologically advanced inspection device designed for demanding production lines in the food sector (meat, bakery, frozen food, processing) and the pharmaceutical sector. Equipped with a multi-frequency "3f" system and advanced digital signal processing (DSP), the detector guarantees the highest level of detection sensitivity. The device easily identifies small metallic contaminants – including ferrous metals, non-ferrous metals (e.g., copper, aluminum), and particularly difficult-to-detect magnetic and non-magnetic stainless steel, regardless of their depth within the product. The core of the machine is a powerful head with a wide 620 x 270 mm inspection window, working in conjunction with a conveyor belt with a width of 600 mm. These technical parameters allow for the seamless inspection of large-sized products – bulk packaging, cartons, frozen blocks, and products fed in bulk on a continuous system. The MET30+ model features built-in memory that allows saving programs for many different products and an advanced product effect compensation function. This effectively eliminates false alarms caused by the natural conductivity of the food being inspected (e.g., high humidity, salt content in meat, or freezing temperature), while maintaining maximum precision in operation.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Hodpfxsyvrtue Af Sou Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: excellent (used), functionality: fully functional, REF: MM6393 Hsdey Hiw Sepfx Af Sju Loma Systems IQ2 conveyorised metal detector, used in food production to detect and reject ferrous, non-ferrous and stainless-steel contamination in packed or loose product before despatch. Fitted with alarm and belt-stop-on-detect reject system. Manufacturer - Loma Systems Model - IQ2 Aperture - 350mm wide × 250mm high (160mm usable) Belt - 1800mm long × 200mm wide, modular Intralox type Reject system - alarm and belt stop on detect

Condition: excellent (used), Rated temperature: 1100°C Usable chamber dimensions (W x D x H): 200 x 300 x 150 mm Electrical connection: 230 V, 1.4 kW Heating-up time: 100 min. Footprint: 752 x 576 x 700 mm Hedey Uwqvspfx Af Sju Weight: 78 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D Hsdpfx Afey U Ngcs Ssu 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Hedpfjxv Dh Isx Af Seu • Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm Hodsyyz Ebjpfx Af Ssu - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!