Used Oms Twin Saw for sale (8,723)

Condition: excellent (used), Table dimensions: 1170x800 Cutting width to the fence: 100 mm Maximum cutting height: 480 mm Bearing-guided cutting blade Kedpezvn Sdefx Ahbjdu Wheel width: 45 mm Wheel diameter: 800 mm Weight: 820 kg Year of manufacture: 1998 Power: 5.5 kW Speed: 690 RPM CE marking DTR manual (Declaration of Technical Requirements) Feed speed: 3.5, 5, 8, 13.5 m/min and 6, 10, 17, 23 m/min Transport dimensions: 1600x1200x2500 (height)

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Kdjdpfxjwuucis Ahbou Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Blade width: 25 x 6/10 mm Max. cutting height: 295 mm Cutting width: 580 mm Table height: 940 mm Table size: 860 x 600 mm Max. blade length: 4580 mm Stand side on the left Belt guide on the top and bottom Table can be tilted with parallel stop Motor: 2.2 kW Kodpszb N Tuofx Ahbedu Dust extraction connection diameter: 100 mm Dimensions: 1210 x 750 x 2077 mm Weight: approx. 350 kg Location: Nattheim

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Ksdpfevdk A Ejx Ahbsdu Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Kjdpsztvy Rjfx Ahbsdu - Motor: 1.5 kW - Connection: 380 V

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: - Motors: 2 - Length: approx. 320 cm - Width: approx. 140 cm - Height: approx. 160 cm - Table: swivelling - Technical details: on request Kdedpfxjztvywe Ahbsu

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: - Workpiece length: 55–170 mm - Workpiece height: max. 27.5 mm Kdsdpfx Aheztvzhsbeu - Workpiece width: max. 28 mm - Milling units: 2 - Cross-cut saw: 1

Condition: excellent (used), IM Very good condition. Kdjdpfxsxcllus Ahbju

Condition: new, Year of construction: 2025, Schnittbereich rund: 230 mm Kjdpfxowzwg Rs Ahbedu Cutting area, square (W x H): 310x230 mm Cutting range 45° round: 210 mm Cutting range 45° flat (W x H): 210x210 mm Cutting range 60° round: 140 mm Cutting range 60° flat (W x H): 140x140 mm Smallest size that can be cut: 10x10 mm Shortest remaining piece length in single cut: 30 mm Shortest remaining piece length in automatic mode*: 330 mm Length: 2350 mm Width including chip conveyor: 1750 mm Height: 1500 mm Height of material support: 895 mm Weight of machine approx.: 1150 kg Electrical connected load: 2,5 kW Saw motor power: 1,5 kW Hydraulic motor power: 0,75 kW Cutting speed continuously adjustable: 20-80 m / min Levelling speed: 1-300 mm / min Dimensions of the saw band: 2910x27x0,9 mm Standard configuration CE standard safety guardIndividual valve feed controlCE electrical safetyLED work lightSaw blade breakage sensorInverterIndividual vise clampingManually movable guide armOne-piece saw blade

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm Kdodpof D H Hbsfx Ahbju -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Price: On request - Serial number: U5624 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) Kdjdpfxjz Rz E Se Ahbju - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, operating hours: 1,961 h, lifting height: 8,300 mm, free lift: 2,400 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 750 mm, total height: 3,330 mm, total length: 1,750 mm, total width: 1,270 mm, color: grey, Year of manufacture: 2004 Empty weight: 3.500 kg Lifting capacity: 1.600 kg Kodpfxeyvfphj Ahbedu - Year: 2004 - Documentation available: Yes - Serial number: F24519R00338 - Operating hours: 1961 - Lifting capacity: 1600kg - Lifting height: 8300mm - Overhead clearance: 3330mm - Free lift: 2400mm - Fork length: 1200mm - Maximum fork width: 750mm - Attachment: Side-shift - Options: Free-lift - Mast: Triplex - Drive: Electric - Driving direction: 2 Road - Battery information: - └ Brand/Type: 4IPzS620 - └ Battery year of construction: 2008 - └ Capacity: 620Ah - └ Battery voltage: 48V - Transport dimensions: 1750mm x 1270mm x 3330mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Kdjdpfxjvuf Iqs Ahbou Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Condition: excellent (used), Panel saw ALTENDORF F45 ProDrive Technical data * Manufacturer: Wilhelm Altendorf GmbH & Co. KG * Model: F45 ProDrive * Year of manufacture: 2016 * Serial number: 16 * Machine type: Panel saw with sliding table Technical parameters * Main motor power: 7.5 kW * Minimum saw blade diameter: 250 mm * Maximum saw blade diameter: 450 mm * Width of the saw blade guard slot: 13 mm Electrical data * Connection voltage: 400 V Kdedpfxo Aa Nt Us Ahbju * Rated current: 15.5 A * Frequency: 50 Hz * Number of phases: 3 Main motor * Motor manufacturer: ATB * Motor type: AF132S/2B-11 * Motor power: 7.5 kW

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Kdsdpj Aa Iibsfx Ahbeu Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Year of construction: 2016, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! Kedj Aay Sbepfx Ahbjdu - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: new, Year of construction: 2025, machine/vehicle number: 5402612012, functionality: fully functional, operating hours: 12 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: PLC-controlled, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 2,500 mm, total length: 4,700 mm, total width: 6,000 mm, overall weight: 3,850 kg, table height: 810 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT A-CNC | 2025 | ONLY 12 HOURS OF OPERATION | 38% SAVING CNC DEMO MACHINE DIRECTLY FROM THE MANUFACTURER – AVAILABLE IMMEDIATELY! We are selling a fully automatic, two-column band saw PEGAS-GONDA 540 HORIZONT A-CNC, manufactured in January 2025, directly from our showroom. Only 2 hours of operation! The machine was used exclusively for demonstration purposes and was never used in production. Selling due to replacement with a new showroom machine. SPECIAL PRICE – 37.8% SAVING! New price: 89,964 EUR Offer price: 56,000 EUR plus VAT You save 33,964 EUR! TECHNICAL DATA Year of manufacture: 01/2025 Hours of operation: 12 h Fully automatic CNC two-column band saw Kedpfx Ahs Aa Dkhobsdu Bilateral miter cuts up to 60° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,845 kg MITSUBISHI PLC control Automatic material feed with ball screw drive Feed length per stroke: up to 2,000 mm Multiple feed: up to 9,999 mm Hydraulic material clamping and saw band tensioning Automatic cutting cycle 6 MONTHS MANUFACTURER'S WARRANTY We provide a 6-month warranty on spare parts and labor. In the event of a valid warranty claim, the buyer will bear the travel and transportation costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician labor: 50 EUR/hour (outside the warranty) DELIVERY AND COMMISSIONING Price: 56,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Machine available immediately! We would be happy to offer transport to the customer, professional commissioning, and operator training for an additional fee, according to our standard service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA accessories is available (see attached price list). We particularly recommend our original roller conveyors for efficient material handling and automated sawing operations. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Only 2 hours of operation, never used in production Fully automatic CNC operation Directly from the manufacturer 33,964 EUR price advantage compared to a new machine 6 months warranty Original manufacturer service Available immediately Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment • Kedpfx Asyudquehbedu

Condition: used, Technical data: Saw blade diameter: 500 mm Automatic saw feed Kdjdpfx Ahjxz Dnrobeu Max. cutting height: 160 mm Table length: 1950+4000 mm Table width: 550 mm Table with integrated rollers Roller diameter: 80/60 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 6,700 mm Width: 1,600 mm Height: 1,900 mm

Condition: excellent (used), Clearance height 90 cm, weight 478 kg, angle adjustment, table length 220 cm, motor 5 kW, cutting height 10 cm. Kdodozkkqxjpfx Ahbju

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm Kedperi Si Djfx Ahbjdu

Condition: used, Technical specifications: Saw blade diameter: 450 mm Automatic saw feed Max. cutting height: 150 mm Table length: 2890 + 3350 mm Table width: 540 mm Table with rollers Kjdpfx Ahezh Hd Asbsdu Roller diameter: 60 mm Ability to cut at a 90-degree angle Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 7000 mm Width: 950 mm Height: 1250 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 30 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 620 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,600 mm, total length: 3,940 mm, total width: 2,300 mm, overall weight: 7,700 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 5 | 2025 | TCT HIGH-PERFORMANCE SAW | 32% SAVING TOP MODEL FROM PEGAS-GONDA – CNC HIGH-PERFORMANCE BAND SAW FOR CARBIDE-TIPPED SAW BLADES! We offer a PEGAS-GONDA THOR 5, model year 2025, directly from our showroom. The THOR 5 belongs to the top class of our production range. It was specifically developed for highly productive sawing of solid materials with carbide-tipped saw blades (TCT technology). The extremely robust construction, the powerful 15 kW drive, and the intelligent cutting control enable high cutting performance, precision, and low vibration. SPECIAL PRICE – 32.3% SAVING! New price: 127,008 EUR Our price: 86,000 EUR plus VAT You save 41,008 EUR! TECHNICAL DATA Model year: 2025 – Demo machine Fully automatic CNC two-column band saw Cutting range, round: 550 mm Cutting range, rectangular: 620 × 550 mm Straight cuts 90° Saw blade: 7680 × 54 × 1.6 mm Band speed: 15–150 m/min Main motor: 15 kW Weight: approx. 7,735 kg SIEMENS SIMATIC S7-1200 PLC SIEMENS TP700 Comfort Touchscreen Servo-controlled saw feed with ball screw drive CNC material feed: 3–750 mm per stroke Multiple feed: up to 19,999 mm Hydraulic material clamping and band tensioning HIGHLIGHTS OF TCT TECHNOLOGY Optimized for carbide-tipped saw blades Kdsdpfxs Aa Drfe Ahbou Highly productive cutting of solid materials Low-vibration, heavy-duty construction with polymer concrete filling Automatic cutting control ASR (ARP/RZP) Automatic cutting path control KKR Automatic material feed and programmable cutting cycles Integrated chip conveyor Ideal for industrial series production 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of recognized warranty claims, the buyer only bears the travel and mileage costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician labor: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 86,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES Original PEGAS-GONDA accessories and roller conveyors available. We will gladly prepare an offer for a complete high-performance sawing station. YOUR ADVANTAGES: TCT high-performance technology 15 kW drive for demanding cuts Fully automatic CNC operation Directly from the manufacturer 41,008 EUR price advantage 6 months warranty Immediately available Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 4 h, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 450 mm, cutting width (max.): 450 mm, control type: CNC control, roller diameter: 450 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,300 mm, total length: 3,630 mm, total width: 2,100 mm, overall weight: 6,100 kg, table height: 810 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 4 | CNC HIGH-PERFORMANCE BAND SAW | SAVE 30% PREMIUM SHOWROOM MACHINE – DIRECT FROM THE MANUFACTURER! We offer a fully automatic PEGAS-GONDA THOR 4 double-column band saw directly from our showroom. The THOR 4 belongs to our premium range of high-performance saws, designed for productive cutting of solid materials, including hard and tough materials such as tool steels and stainless steels. Its extremely rigid construction, powerful 9 kW blade drive and intelligent CNC cutting control ensure high productivity, accuracy and minimal vibration. Showroom demonstration machine, offered for sale as part of our showroom equipment renewal. SPECIAL OFFER – SAVE 29.8%! New machine price: EUR 111,132 Our price: EUR 78,000 excl. VAT Your savings: EUR 33,132! TECHNICAL SPECIFICATIONS Fully automatic CNC double-column band saw Round cutting capacity: 450 mm Rectangular capacity: 450 × 450 mm Kodpfx Ahs Aa Drrobodu Straight cutting at 90° Saw blade: 6830 × 54 × 1.3 mm Blade speed: 20–150 m/min Main motor: 9 kW Weight: approx. 6,100 kg SIEMENS SIMATIC S7-1200 PLC SIEMENS TP700 Comfort touchscreen Servo-controlled cutting feed with ball screw CNC material feed: 3–730 mm per stroke Multiple feeding: up to 19,999 mm Hydraulic material clamping and blade tensioning HIGH-PERFORMANCE FEATURES Productive cutting of solid materials Designed for hard and tough materials Heavy-duty low-vibration construction with polymer-concrete filling Automatic cutting regulation ASR (ARP/RZP) Precision servo-controlled cutting feed Fully automatic material feeding FCV system minimizing material remnants Integrated chip conveyor Ideal for high-volume industrial production 6-MONTH MANUFACTURER WARRANTY Warranty covering spare parts and technician labor. For accepted warranty claims, the buyer pays technician travel expenses. Service rates: Vehicle mileage: EUR 1/km (round trip) Technician travel time: EUR 25/hour Technician labor: EUR 50/hour (outside warranty) DELIVERY AND SERVICE Price: EUR 78,000 excl. VAT, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Available immediately! Transport, professional commissioning and operator training can be arranged at additional cost according to our standard service rates. OPTIONAL EQUIPMENT Genuine PEGAS-GONDA accessories and roller conveyors available. We recommend completing the machine with suitable original roller conveyors. We will gladly provide a quote for a complete high-performance sawing workstation. WHY CHOOSE THOR 4? High-performance CNC sawing technology Powerful 9 kW blade drive Directly from the manufacturer Save EUR 33,132 6-month manufacturer warranty Genuine manufacturer service Available immediately Contact us for more information or to arrange an inspection! PEGAS-GONDA – directly from the manufacturer.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical data: Manufacturer: PANHANS by HOKUBEMA Ksdpfx Ahj Aav Uxsbsdu Model: 680|10 Year of manufacture: 2017 Engine power: 5.5 kW (7.5 hp) Cutting length, sliding table carriage: 3,450 mm Max. cutting height: 155 mm (90°) Cutting width, parallel fence: 1,030 mm Max. saw blade diameter: 450 mm Saw blade tiltable: 0–47° Electromotive height and tilt adjustment Digital displays for cutting height and blade tilt Table size: 1,200 × 655 mm Machine weight: approx. 1,050 kg Dust extraction connections: 120 / 80 mm CE-certified