Used Niftylift Hr17 Hybrid Mkii for sale (443)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,776 h, load capacity: 200 kg, mast type: telescopic, lifting height: 15,000 mm, lifting power: 230 kg/m, platform length: 700 mm, platform width: 1,400 mm, overall weight: 1,550 kg, empty load weight: 1,550 kg, transport length: 4,100 mm, transport width: 800 mm, transport height: 1,940 mm, construction height: 1,940 mm, fuel type: hybrid, fuel tank capacity: 7 l, color: red, We are offering this used Cela DT15 Spyder tracked platform, manufactured in 2016, for sale. Maximum reach: 7.50 m Minimum working height: 15 m Load capacity: 230 kg Rotation angle: 360° Hybrid: Honda GX440 gasoline engine + electric Self-leveling Additional options: 220 V + compressed air/water line in the work platform Crodpfx Aezv Ik Hsiljh Width: 80 cm (without work platform) Height: 194 cm Weight: 1550 kg + 4 outrigger plates Never rented out, first owner Major service performed in December 2025 + new starter battery An IFOR WILLIAMS 3.5 T low-loader trailer is also available for sale (EUR 2800 + VAT). If you have any questions or would like more information, please send us a message or call us.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, total width: 2,250 mm, total height: 4,000 mm, loading space length: 9,250 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MAN TGS 35.520 8x2-6 BL CH Crjdey Rvynspfx Ailjh Basic Data - The new MAN Truck Generation - MAN code: FPLOEBL5 - Euro 6e - Vehicle type: flatbed truck/chassis - Cab: TM (narrow, long, medium height) - Wheelbase: 4,105 mm - Rear overhang: 1,250 mm Weights (Permissible / Technical) - Gross weight: 32,000 kg / 34,500 kg - Front axle: 7,100 kg / 7,500 kg - Second front axle: 7,100 kg / 7,500 kg - Rear axle: 11,500 kg / 12,000 kg - Trailing axle: 7,100 kg / 7,500 kg Engine & Drive - Diesel engine: MAN D2676 LFBF, 382 kW / 520 hp, 2,650 Nm - MAN TipMatic 12.28 OD - 430 mm single-disc clutch - High-performance engine brake MAN EVBec - MAN EfficientRoll - MAN Idle Speed Driving Axles & Suspension - Front axle: 9,200 kg, offset, steered - 2nd front axle: 9,200 kg, offset, steered - Rear axle: HY-1350, 13,000 kg - Trailing axle: 9,000 kg, steered, liftable - Axle ratio: i = 3.08 - Air suspension - Digital axle load display - Shock absorbers and stabilizers on all axles Tires - FA/2nd FA/Trailing axle: Continental 315/60R22.5 EcoPlus HS3 - Rear axle: Continental 315/60R22.5 Conti Hybrid HD3 - Rims: Alcoa Dura-Bright EVO, 9.00x22.5 - Tire pressure monitoring system TPM Chassis - Longitudinal member thickness: 8 mm - Underrun protection: front, side, rear - Fuel tank: 300 l right, steel - AdBlue tank: 35 l right Electrics - 2x batteries 12 V / 210 Ah AGM - Alternator: 28 V / 120 A / 3,360 W - 24 V battery management system Brakes - Electronic braking system (EBS) - ABS - Full braking assistant - Disc brakes on all axles - Electronic parking brake - Anti-roll back function MAN EasyStart Cab - Comfort cab suspension - Electric glass sunroof - Central locking with remote - 4 vehicle keys - LED package Plus - High beam assistant - Automatic driving light control - 2 LED amber revolving beacons - Reverse warning system - Climatronic air conditioning - 4 kW supplementary water heater - Lower bunk with slatted frame - Leather multifunction steering wheel - Professional instrument cluster 12.3" - Digital tachograph with remote download - MAN Mediasystem Professional Navigation 12.3" - Advanced sound system with subwoofer Seats - Driver’s seat package Premium, air-suspended, heated - Passenger seat: unsuspended, adjustable Assistance Systems - ESP - ASR - Cruise control ACC Stop & Go - Emergency braking assistant EBA - Lane departure warning LDW - Lane change assist LCS and turn assist - Attention warning MAN AttentionGuard - Front detection - Traffic sign recognition - Reversing motion system Interfaces - 2-line trailer brake coupling - 15-pin trailer socket - ABS socket - Body power supply interface - FMS interface - PTO gearbox-dependent type NH4c Paintwork - Cab finish: RAL 5002 ultramarine blue - Door extension and doorstep finish - Fender finish - Bumper finish ----- WIESE Body for Aerial Platform and Construction Machinery Transport Body dimensions - Length: approx. 9,050 mm, usable length up to the toolbox in front of the bulkhead approx. 8,770 mm - Width: approx. 2,550 mm - Loading height: approx. 1,050 mm unladen Substructure - Steel welded construction, weight-optimized - Longitudinal and crossmembers from laser-cut special profiles - Short crossmember spacing for high point loads - Rear inclined for low ramp angle - 90° outer frame profile with lashing points for tie-down straps Bulkhead & Floor - Reinforced bulkhead, 200 mm below cab

Condition: used, functionality: fully functional, Well-maintained Roland VersaUV LEJ-640 UV hybrid printer in good working condition. This versatile printer can print directly onto a wide range of rigid and flexible materials, delivering high-quality, vibrant results with Roland's UV-LED technology. Ideal for signage, promotional products, packaging prototypes, displays, and specialty graphics. The printer has had regular professional maintenance throughout its lifetime and has been operated by a single owner since new. It has been carefully maintained to ensure reliable performance and consistent print quality. Key features: UV-LED hybrid printing technology Prints on both rigid and roll media Credpezw U Ubsfx Ailsh CMYK + White + Gloss capabilities Suitable for a wide range of substrates Regularly serviced and maintained One-owner machine Reliable and proven production printer Available for inspection and test printing. Please contact us for additional information, photos, or pricing.

Condition: new, overall weight: 36,000 kg, next inspection (TÜV): 09/2026, loading space length: 13,830 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Curtain Master MEGA White aluminum Dimensions and Weights Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between posts 2480 mm Inner width between longitudinal beams (without lifting roof) 2480 mm Lateral loading height with lifting roof and inner height 2850, 2785 mm Axle distance 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance from kingpin to 1st axle 6390 mm Number of Euro pallets 34 pcs Technically permissible gross weight (administrative) 36000 kg Technically permissible gross weight 42000 kg Technically permissible axle load (administrative) 8000 kg Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Manufacturer designation NS3K nd Accuracy +/- 4% nd Unladen weight 6560 kg TECHNICAL DATA Chassis Lamp bracket made of steel 371 mm Pallet stop with lashing eyes Wielton side impact protection, white solid filling Rear underrun protection, fixed Steel rear underrun protection Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Perimeter frame with continuous lashing points for securing the load, SAFETY LOCK system, 50 to 67 per side depending on the model Steel buffer at the rear Axes and Suspension Number of axles 3 Rigid axles Saddle height 950 BPW disc axles 3x 9000 kg, 19.5 ECO PLUS, 3 clamps, BPW, ET=120 1st lift axle Support legs 2-speed geared support legs, full load (BPW Gen2 FL/SAF Hercules) Fenders PVC fenders, shell, 2 front, 6 rear Rims 6x steel rim 19.5-14 ET-120 Tires 6x ALL-ROAD Premium tires 445/45/R19.5 (Goodyear) Other chassis equipment Two wedges with mounting Customs rope/tarpaulin rope on the front wall (no customs seal) 1 extendable rear ladder 2 identification plates on the rear panel 565x200 ECE-R70 Body Inner height 2950 Insert strips - 4 rows 1st row, aluminum overlay strips, H=100 mm, 8 pcs Sliding roof Edscha HYBRYD (0, +50, +100, +150) and 450 for loading, roof can be moved forward and backward independently of the side tarpaulins Side tarpaulins with 24 tarpaulin tensioners Aluminum front wall Front wall impact protection (metal plate) H=1500 mm 2nd row, aluminum overlay strips, H=100 mm, 8 pcs 3rd row, aluminum overlay strips, H=100 mm, 8 pcs 4th row, aluminum overlay strips, H=100 mm, 8 pcs Tarpaulin quick tensioner at the front Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Tarpaulin tensioner with additional locking mechanism Sliding tarpaulin that can be opened on both sides EDSCHA HYBRID Rear wall as an aluminum double-wing door Braking system/pneumatics Braking system Wabco with Basic Modulator with RSS/RSP Steel air reservoir Chassis painting Chassis painting RAL 7021 (black gray) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 RAL 9006 (silver) Electrical system 2x7-pole + 1x15-pole with EBS connection, without connection cables to the central unit Lighting LED Aspöck-EUROPOINT III with flashing side marker lights Additional systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Version Crsdpfxezx Iqro Ailoh DC 9.5 design Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Designation in German Certificates/Homologation Certificate f

Condition: good (used), Year of construction: 2023, functionality: fully functional, TEXA Konfort 760 Touch RID incl. integrated refrigerant analysis for refrigerant R1234yf KONFORT 760 TOUCH, complete with 10" touch display, 20 kg refrigerant tank, 100 l/min capacity, two-stage vacuum pump, and Bluetooth and Wi-Fi interfaces. Equipped with a vehicle database, protective cover, and manual. TECHNICAL SPECIFICATIONS Suitable for R134a or R1234yf Suitable for BUSES (760 Touch BUS) Fully automatic service control Automatic leak detection Refrigerant measurement with electronic scales Cjdpfxowzhnrj Ailerh Oil contamination prevention system - ATB (Air Tight Bottle - patented) Automatic oil management with electronic scales Measurement of recovered oil quantity by electronic scale Compatible with hybrid vehicles Automatic maintenance management (DATABASE) Manual maintenance control Safety system FPS (Fan Protection System) Internal flushing when changing oil type Service report printout via Wi-Fi 10" touch display Suitable for KONFORT APP Refrigerant tank 20 kg (760 TOUCH) Refrigerant tank 30 kg (for 760 BUS TOUCH) Filling accuracy +/- 15 g High refrigerant recovery rate (over 95%) Two-stage vacuum pump Automatic oil container recognition (patented) Scales locking system Operating mode: DATABASE Operating mode: MANUAL SERVICE Operating mode: MY DATABASE Multilingual software Automatic service hose compensation Automatic maintenance management Simplified maintenance Automatic control of non-condensable gases Remote customer support Highly accurate automatic oil injection Automatic updates Incl. POE oil container for hybrid vehicles Incl. thermal printer

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Crsdpfx Aeiz A Ezeileh Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, axle configuration: 4x4, load capacity: 400 kg, mast type: other, lifting height: 18,450 mm, platform length: 2,400 mm, platform width: 900 mm, overall weight: 8,930 kg, fuel type: hybrid, color: red, Equipment: all wheel drive, Articulated telescopic work platform AIRO A18 JRTH 400 Plus with battery-powered hybrid system Technically in fully functional condition. Optically as shown. - All-wheel drive / all-wheel steering - Oscillating axle - Differential lock Year of manufacture 2022 Max. working height 18.45 m Max. height during travel 18.45 m Max. lateral reach 9.80 m Max. load capacity 400 kg Basket rotation +/- 90° Max. climbing ability 22° Transport dimensions L/W/H 7.08 (5.00) / 2.20 / 2.41 (2.80) m Drive: Battery-powered hybrid, 4x4 all-wheel drive Color: red Special features: Large work basket 2.40 x 0.90 m, supercharger, bright off-road tires Crodpfx Ajyf Hfvoiloh UVV inspection performed upon purchase, new! Available from stock in Langenhagen All information regarding the offered machine is without guarantee. Typographical errors / errors / prior sale reserved.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 Crjdpfx Aiezl Irpeleh - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 510 hp / 375 kW (D13K) - Meets ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator in the display (Volts, Amperes and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable content 64 liters - Tank cap lockable - Tank filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern - Trailer coupling to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Scavenge pump, electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min., for vehicles/combinations with increased air demand - Air intake front with normal air filter - Alternator 150A / 4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: seats in fabric, lateral vinyl (blue/dark blue) with interior in fabric grey - Driver's seat Comfort, air-sprung, heated, seatbelt in the seat - Passenger seat Standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-up heater cab, 2 kW - Storage space under the bunk - Cool box with freezer compartment 33 L un

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Csdpfxey Ufglo Ailsrh Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Crsdpfx Aisy Ul I Aslsh Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, Crodpfx Aijzmhbgsleh reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Regular maintenance of anilox rollers

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 hp / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High-performance instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator on the display (Voltage, amperage and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Lockable tank cap - Fuel filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4395 mm, measured from the drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pole - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Venting pump electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual interventions in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air requirements - Air intake at the front with normal air filter - Alternator 150A/4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign Cedpfx Aieywfxyslerh - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN at the rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: Seats in fabric, side panels in vinyl (blue/dark blue) with interior in fabric grey - Driver seat comfort, air-sprung, heated, seat belt in the seat - Passenger seat standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-alone cab heater, 2 kW - Storage spa

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness Crodpfx Aezgfnqoileh 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 5,440 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, spindle speed (max.): 60,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Hamuel Reichenbacher ECO-NT was manufactured in 2011. It features a working envelope of 4,845 mm and 5,440 mm in the X-axis, 1,630 mm in the Y-axis, and 1,000 mm in the Z-axis. The machine is equipped with a powerful spindle speed of up to 60,000 rpm and a versatile tool changer with 12 positions. If you are looking to get high-quality milling capabilities, consider the Hamuel Reichenbacher ECO-NT vertical machining centre we have for sale. Contact us for further details. • Unit Configuration: 5-axis milling units with cardan or fork-mounted spindle • Reckert Spindle Power: 4.6 kW - 15 kW • Reckert Spindle Speed: 0 - 60,000 rpm • Reckert Tool Holder: HSK F25 - F63 • Omlat Spindle Power: 3.5 kW - 7 kW • Omlat Spindle Speed: 0 - 45,000 rpm • Omlat Tool Holder: HSK F25 - F63 • Tool Changer: 12 position tool changer Codpfx Aiezu Rnfoljrh • Extraction & Chip Disposal: Room extraction nozzle for lubricant mist and dust, clamping device extraction • Machine Table Equipment: HPL table surface (smooth or grid), Aluminum table surface (smooth or grid), Steel strips with fitting and threaded bushes • Workpiece Clamping Technology: Vacuum clamps, Pneumatic clamps, Special clamping devices Additional Equipment: • Loading and unloading systems, Torque support for additional units, Air blow nozzles, Air ionisation, Minimal quantity lubrication, Tool breakage control, Tool recognition system, Camera system, Laser projector Supported Materials: • Wood, Aluminum, Steel, Inconel, Titanium, Plastic, Composite materials, GRP, Hybrid plastic/metal parts

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, The FABO FTT-100-S Mobile Tertiary Impact Crushing & Screening Plant is a tracked crushing solution designed for producing high-quality fine aggregates and manufactured sand. Combining a high-speed tertiary impact crusher with an integrated vibrating screen, it delivers excellent product shape, high production efficiency, and reliable performance in quarrying, mining, and recycling applications. Equipped with a PLC automation system, hybrid diesel-electric power unit, and heavy-duty tracked chassis, the FTT-100-S offers outstanding mobility, low operating costs, and quick setup on any job site, making it the ideal choice for demanding crushing projects. Technical Specifications Production Capacity: 180–250 T/H Maximum Feed Size: 120 mm Csdszv S U Nepfx Ailjrh Crusher Type: TK-65 Tertiary Impact Crusher Vibrating Screen: 1500 × 4200 mm Drive System: Hybrid Diesel-Electric Mobility: Tracked Chassis FABO – Quality Is Our Soul.

Condition: used, mileage: 83,800 km, power: 110 kW (149.56 HP), first registration: 09/2013, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 05/2027, color: silver, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 5,200 mm, loading space width: 2,440 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, Mitsubishi Fuso Canter 7C15 Eco Hybrid. Young plywood box body with tail lift. MBB Palfinger, 1,000 kg capacity. Dimensions: 5.20 x 2.44 x 2.38 m. Wheelbase approx. 3.85 m... Air conditioning, radio/CD/navigation system, spoiler, 3 seats, armrest, power mirrors, ABS, 2 airbags, 2 tie-down rails, engine brake. =German registration + 1 owner= =Daily purchase of commercial vehicles, as well as trade-ins possible= Detailed view of the vehicle // Detailed walkaround of the car: ?v=ac4-V6hux4Q Price: 9,900 EUR net. Codpfx Aiozttx Rolerh Payload: 3,140 kg.

Condition: new, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, White aluminum Dimensions and Weights Height of the fifth wheel coupling: 1120 mm Inner side height below the longitudinal beam (from the outside) for the selected inner height: For h = 2725 mm, loading space: 2637 mm Neck height: 120 mm Overall length: 13882 mm Length of the inner platform: 13633 mm Outer width: 2550 mm Width of the inner platform: 2480 mm Inner width between the posts: 2480 mm Inner width between the longitudinal beams (lower longitudinal beam): 2430 mm Wheelbase: 1310 mm Distance: Kingpin to 1st axle: 6390 mm Total weight: 36000 kg Technical total weight: 42000 kg Permissible administrative axle load: 8000 kg Permissible technical axle load: 9000 kg Permissible fifth wheel coupling load (technical): 15000 kg Unladen weight: 5383 kg TECHNICAL DATA Chassis Wielton lamp carrier Wielton side impact protection – white solid filling Fixed rear underrun protection Steel rear underrun protection Steel impact buffer at the rear Perforated outer frame with continuous lashing points for securing the load Floor made of 30 mm screen printing plate, load capacity 7 tons Axles and Suspension Number of axles: 3 Fixed axles 1st lift axle Fifth wheel height: 1120 Axles: 3x9000 kg, 22.5 disc brake, ET=120, aggregate and clamps manufacturer: BPW Support legs SAF Hercules 2-speed geared landing legs, full load Fenders PVC fenders – shell, 2 front, 2 rear Rims 6x Steel rim 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x Tires 385/65/22.5 – according to manufacturer's choice Other chassis equipment Ship fastening straps, 4 pairs Toolbox - 145L Two wedges with fasteners Customs rope/tarpaulin rope on the front wall (no customs seal) 1 retractable ladder at the rear 2 identification plates at the rear on the rear wall 565x200 ECE-R70 Superstructure Internal height: 2725mm Superstructure Sliding roof Front wall impact protection (metal plate) H=1500mm Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Painted aluminum wall, Magnelis steel posts Sliding tarp, one-sided, from rear to front, EDSCHA HYBRID Rear wall as an aluminum double-wing door, steel posts Side tarpaulins with 24 tarpaulin tensioners, Pallet stop with lashing eyelets DC9.5 Braking system/Pneumatics Steel air tank Braking system Knorr The Knorr system is not compatible with Ford tractors Chassis painting Chassis painting RAL 7021 (black-grey) KTL coating Crodpfszyduvsx Ailoh Tarpaulin color Side tarpaulin color Polplan 018 ~ RAL 9006 (silver) Electrical system LED rear lights – 2 pcs 1X15-pole with EBS connection according to ADR Lighting LED Aspöck - EUROPOINT III with flashing side marker lights Additional systems A telematics system with access to a telematics portal for trailers and semi-trailers, which has a tire pressure monitoring system. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheels and a telematics device with a battery connected to the EBS. The telematics device supports 2G mobile networks and LTE Cat. M1. Includes a 12-month subscription for using the ATP telematics portal. Marking Partial contour marking on the side, yellow Partial contour marking at the rear, yellow Wielton warning sticker Designation in Polish Sticker set for ferry tarpaulins Certificates/Homologation Load securing certificate according to VDI 2700 DIN EN 12642 XL DC 9.5 certificate Beverage certificate Warranty The manufacturer provides a 24-month warranty on the vehicle, subject to the

Condition: excellent (used), Year of construction: 2013, operating hours: 346 h, lifting height: 7,900 mm, fuel type: electric, General information Year of manufacture: 2013 Technical information Drive: Wheel GVW: 2.469 kg Dimensions (LxBxH): 241 x 115 x 226 cm Functional Lifting capacity: 454 kg Cjdpfx Aijzunyxslerh Working height: 990 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Additional information Please contact Ton for more information Manufacturer: Genie Type: GS2646 Year of manufacturing: 2013 Weight: 2.469 KG Hourmeter: 346 Drive: Elektrisch Product number: 26039 Platform height: 7,9 meter Working height: 9,9 meter Platform measurements: 226x115 cm Maximum outreach: Extendable platform: 91 cm Total measurements LxWxH: 241x115x226 cm Max. platform load: 454 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 5.450,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives Csdpfjf Eyqqex Ailerh ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Crodpfx Aiszvf Rqsloh Dimensions (LxBxH): 1620 x 325 x 370 cm Make of engine: Perkins Emission class: EEV Productivity: 350 tph = Additional options and accessories = - Central lubrication - Particulate filter = Remarks = Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Operation (mm) 16,400 x 6,350 x 4,150

Condition: excellent (used), Year of construction: 2013, operating hours: 623 h, lifting height: 11,700 mm, fuel type: electric, General information Year of manufacture: 2013 Technical information Drive: Wheel GVW: 3.221 kg Dimensions (LxBxH): 248 x 119 x 254 cm Functional Lifting capacity: 350 kg Working height: 1.370 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Additional information Please contact Ton for more information Manufacturer: Genie Type: GS4047 Cjdpfx Aiszunupolorh Year of manufacturing: 2014 Weight: 3.221 KG Hourmeter: 623 Drive: Elektrisch Product number: 26038 Platform height: 11,70 meter Working height: 13,70 meter Platform measurements: 226x119 cm Extendable platform: 91 cm Total measurements LxWxH: 248x119x254 cm Max. platform load: 350 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 6.250,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Year of construction: 2014, operating hours: 888 h, lifting height: 11,700 mm, fuel type: electric, General information Year of manufacture: 2014 Technical information Drive: Wheel GVW: 3.219 kg Dimensions (LxBxH): 248 x 119 x 254 cm Functional Lifting capacity: 350 kg Working height: 1.370 cm Condition General condition: moderate Technical condition: good Visual appearance: moderate Additional information Please contact Ton for more information Manufacturer: Genie Type: GS4047 Year of manufacturing: 2014 Weight: 3.221 KG Hourmeter: 888 Drive: Elektrisch Product number: 26024 Platform height: 11,70 meter Working height: 13,70 meter Platform measurements: 226x119 cm Extendable platform: 91 cm Total measurements LxWxH: 248x119x254 cm Max. platform load: 350 KG Machine is technically working Documents incl. CE. Price: € 3.750,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Cedpfx Aiezunrbsljrh Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, mileage: 55,525 km, power: 140 kW (190.35 HP), first registration: 12/2023, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: TRAILER HITCH, surcharge €1,200 Driver assistance system: Driving Assistant, vehicle without model designation, lumbar support for driver's seat, electrically adjustable, metallic paint, tire repair kit (Mobility Pack), front seat heating, list price €52,328 NET Additional equipment: Storage package, passenger airbag deactivation, driver/passenger airbags, Connected Professional package, exterior: High-gloss Shadow Line, exterior mirrors electrically adjustable and heated, mirrors in body color, BMW Live Cockpit Plus, onboard computer, brake assist, DAB tuner (digital radio reception), high-gloss Shadow Line roof rails, wheel theft protection (locking wheel bolts), through-loading system (rear center armrest), dynamic brake lights, Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), first aid kit, driver assistance system: Active Guard Plus (lane departure warning, front collision warning), driver assistance system: attention assistant, driver assistance system: driving experience switch, remote tailgate release, velour floor mats, front footwell lighting, luggage compartment partition net, luggage compartment lighting, automatic tailgate operation, LED rear lights, interior trim: Quartz Silver matt textured, body: 5-door, 3-zone automatic climate control with automatic recirculation control, head airbag system rear, head airbag system front, foldable rear headrests, multifunction sport/leather steering wheel, alloy wheels, mild hybrid 140 kW (2.0 L - 140 kW diesel engine), model update, Park Distance Control (PDC) front and rear, electronic parking brake, tire pressure monitoring system, low emissions according to Euro 6d emission standard, LED headlights, rear side airbags, front side airbags, upholstery: Hevelius cloth, mirror package, start/stop system, warning triangle, widescreen display, tinted thermal insulation glazing Crjdpfsylrfzox Ailjh

Condition: used, mileage: 6,650 km, power: 145 kW (197.14 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, = Additional options and accessories = - Passenger airbag - Electronic window control - left - Electronic window control - right - Driver airbag Codpfxeznrp Rj Ailerh = Notes = - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. D. Neidhart and Mr. J. Ebert will be happy to assist you. OBSIDIAN BLACK METALLIC PAINT, LEATHER BROWN, AMG LINE EXTERIOR / AMG SPORT PACKAGE EXTERIOR, SMARTPHONE INTEGRATION PACKAGE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, MEMORY PACKAGE (DRIVER SEAT, STEERING COLUMN AND MIRRORS), PACKAGE MULTIMEDIA / DIGITAL CONTENT, EQUIPMENT PACKAGE MID, CONNECTIVITY PACKAGE PREMIUM, KEYLESS-GO PACKAGE, DRIVING ASSISTANCE PACKAGE ENTRY, DIGITAL PACKAGE, MEMORY PACKAGE FRONT, NIGHT PACKAGE, MIRROR PACKAGE, PARKING PACKAGE HIGH, LUXURY LEATHER STEERING WHEEL, SPEED LIMIT ADAPTATION BASED ON ROUTE, EXTENDED AUTOMATIC RESTART IN STOP-AND-GO TRAFFIC, ADAPTIVE DAMPING SYSTEM PLUS (ADS+), BLIND SPOT ASSIST, ACTIVE PARKING ASSIST, DISTANCE CONTROL TEMPOMAT PRO "DISTRONIC PRO", ACTIVE TRAFFIC ASSIST, ACTIVE LANE KEEPING ASSIST (CAMERA), DISTRONIC PLUS CROSS SUPPORT (DTR+Q), DRIVER SEAT, ELEC. ADJUSTABLE WITH MEMORY, INTERIOR MIRROR WITH ANTI-GLARE FUNCTION, GPS ANTENNA, EXIT WARNING ASSISTANT, KNEE AIRBAG, HARD DISK NAVIGATION, ECALL EMERGENCY CALL SYSTEM (HERMES), BIOMETRIC USER IDENTIFICATION - FINGERPRINT, SOUND PERSONALIZATION, EXIT WARNING ASSISTANT, DISTRONIC PLUS CROSS SUPPORT (DTR+Q), KNEE AIRBAG, ENGINE DISPLACEMENT 2.0 LITERS, R4 DIESEL ENGINE OM654 Vehicle comes from 1st owner, We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Further information can be found on our homepage ... Errors and omissions as well as prior sale are reserved. Metallic, Alloy wheels, Electronic immobilizer, ESP, Navigation system, Service booklet available, Particle filter, Warranty, Rain sensor, Sports seats, Electric side mirrors, Sport package, Bluetooth, On-board computer, Electric seat adjustment, Hands-free system, Multifunction steering wheel, Isofix, Light sensor, Traction control, Non-smoker vehicle, Roof rails, Lane keeping assist, Emergency brake assist, Keyless central locking, Blind spot assist, Alarm system, Armrest, Heated steering wheel, Hill start assist, Electric tailgate, Leather steering wheel, Lumbar support, Fatigue warning system, Emergency call system, Tire pressure monitoring, Shift paddles, Sound system, Voice control, Touchscreen, USB, Traffic sign recognition, Glare-free high beam, Winter package, Distance warning, Ambient lighting, WLAN / Wifi Hotspot, Apple CarPlay, Android Auto, Fully digital instrument cluster, Wireless charging for smartphones, Interior mirror automatically dimming, Speed limiter, Plug-in hybrid, High beam assist, Electric seat adjustment with memory function, Adaptive suspension, Tinted windows, Electric side mirrors foldable, Distance warning = Further information = Engine displacement: 1,993 cc Number of owners: 1 Please contact Tobias Ebert for further information.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum Cjdpfx Aiszii D Islsrh • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.