Used New J&S Engineering Chamfering Machine Manually for sale (117,483)

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Hjdpji Ezq Djfx Aahep Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time. Hjdpfxjfibfgo Aahep

Condition: new, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional. Hsdei Ea Emjpfx Aahsp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Hedpfsyq Nyyjx Aahep Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, mileage: 334,598 km, power: 315 kW (428.28 HP), first registration: 03/2016, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, navigation system, onboard kitchen, = Additional Options and Equipment = - DVD player - Air conditioning - Front refrigerator - Toilet - USB connections - Webasto auxiliary heating = Further Information = Height: 380 cm Condition: no damage = Company Information = Hjdpfxoyhf Ubo Aahep We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and offers a large parking area that serves as our showroom. We always have a wide range of buses from all brands, with various capacities, models, and price categories in stock. We can help you find the right coach, school bus, or city bus to suit your needs and budget. All information is given without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 am - 12:00 pm, 12:30 pm - 05:00 pm. We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more. (Mowimy po Polsku Agata)

Year of construction: 2006, condition: excellent (used), Manual packaging machine. Hodeiz S Ifspfx Aahsp

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Hedpecnxc Nofx Aahop Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Year of construction: 2003, condition: used, Technical details: Hodpfx Aszbbx Aeahsp weight of the machine ca.: 8,5 t

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Passage between the uprights: 3,500 mm 5-axis machining: Yes Hjdpszc Sagjfx Aahop Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Hodpfxjzauxgs Aahjp Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. The machine is supplied complete with: - 10.4" LCD monitor - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer - spindle cooling system Hsdpfxozcmhxj Aahep - 30 bar high-pressure system - refrigeration system - belt-type chip conveyor - rigid tapping

Condition: used, Hymmen CombiCoater ELX-S 1400 painting system with UV dryer. Hjdpfslf H Tcex Aahop - Technical specifications will be provided shortly. - For self-dismantling and self-collection.

Condition: used, functionality: fully functional, Year of construction: 2025, Schwamborn Concrete Processing Machine STR 702 S -1200 STR 702 S -1200 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Hjdpfx Aajy A E I Eehop Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,950 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 546 h, load capacity: 300 kg, construction height: 2,720 mm, total length: 9,400 mm, construction width: 2,490 mm, working height: 20,300 mm, Telescopic aerial work platform Hodpjyafbljfx Aahjp Speed class: 4.82 Technical condition: good Battery condition: good Description: The Genie S-60 J is a powerful telescopic aerial work platform for working at height outdoors and on uneven terrain. With a working height of up to 20.3 m, a high lateral reach, and all-wheel drive, this machine is ideal for assembly, maintenance, and construction work, even in hard-to-reach locations. It is robust, off-road capable, and easy to operate. For more information and a non-binding inquiry, please visit our website - Safe working at any height. In addition to this machine, we offer aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. We offer everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, CNC universal tool grinding machine SCHÜTTE, type BU 400 CNC 4 Machine – Defective – without control system Machine not operational – electrically non-functional – without CNC control Manufacturer’s No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Distance between centers (height) 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Hsdpfsd Rmcmsx Aahsp Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 volts, 50 Hz, 25 amps - CNC control system removed Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control system missing. Mechanically in good condition, ideal for retrofitting with a new control system Suitable as a source of spare parts or for rebuilding with a new control system

Condition: like new (used), Year of construction: 2018, operating hours: 783 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, construction height: 1,860 mm, Manufacturer + model: HYSTER S 1.6 * EX * Miretti - 2G / Zone 1 * Mast: 2F2800 ID: 26060.5191 Category: Demo Hsdozaf Rajpfx Aahjp Mast: 2F2850 Lowered height: 1860 mm Lifting height: 2850 mm Capacity: 1600 kg Initial lift: Yes Year: 2018 Operating hours: 783 hours Battery: Completely NEW * 24V / 315Ah * Built 02/2026 Options: * EX * MIRETTI - E9799 System / Certificate = TUV 04 ATEX 2593 Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temperature class = T4

Condition: like new (used), Year of construction: 2013, operating hours: 2,668 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex *EX* Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7862 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Hsdpfjzafmhex Aahep Capacity: 1200 kg Year: 2013 Operating hours: 2668 hours Battery: NEW * 24v / 300ah * Year 2023 Options: VERY unique counterbalance stacker in EX version!! *EX* Mitrex! System = ATEX 94/9/EC Gas group = IIIB (non-conductive dust) Type = 2D (allowed in Zone 21) Temperature class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Cantilever adjustable forks - SUITABLE for all types of pallets

Condition: like new (used), Year of construction: 2013, operating hours: 2,071 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex * EX * Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7904 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Capacity: 1200 kg Year: 2013 Operating hours: 2071 h Battery: NEW * 24v / 300ah * Year 2023 Hodpfx Aaszafmbehjp Options: VERY unique CONTRA stacker EX version!! * EX * Mitrex!!!!! System = ATEX 94 / 9 / EC Gas group = IIIB (non-conductive dust) Type = 2D (For use in Zone 21) Temp class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Freestanding adjustable forklift forks - SUITABLE for all types of pallets

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Hedpfx Ajwhkywoahop

Condition: good (used), Year of construction: 2001, Punching machine, Boschert EL300 Tooling system: AMADA Hedpfxednny Rj Aahjp Up to tool station D, diameter 88.9 mm New tool adapters for stations A/B/C Punching force: 280 kN (28 tons) Punching arm outreach: 350 mm Side stop: 500 mm, right/left Depth stop with digital display Side stops: new Total weight: 2300 kg

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Height:2200mm Weight:2900kg Hsdpfoycu E Esx Aahjp

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Hodpfoy Rlv Ssx Aahjp Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Pump Folding unit MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 1989, working order. For butyl application of spacer widths from 6-24 mm Hedpfx Asy T Ipmeahjp butyl storage cylinder 2 x 7,5 kg The machine will be available end of May 2026

Condition: good (used), functionality: fully functional, For sale: 1 used facing machine for HSS blades Manufacturer: Loroch Type: AK Blade diameter min/max: 80/710 mm Pitch: 3-25 mm Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Hsdjy Nx Apspfx Aahop Working speed: 10-45 rpm Coolant Weight: approx. 750 kg Can be inspected in our warehouse upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Hodpfx Aoy Nl U Sjahop