Used Muhr & Bender - Mubea Kl 350 / 203 for sale (10,810)

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Cedpjygw Siofx Albsrg

Year of construction: 2004, condition: ready for operation (used), A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible. Cjdpfjxyk Szox Albjrg

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Crjdpfx Alexddamsbjg

Condition: used, Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Cjdpju Rii Ijfx Alberg Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Codpfsvmpbrsx Alborg Max. wall thickness 2.5 inch Max. bending radius 10.63 inch Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm;

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. Codpfx Alevuqmxjborg 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. DBFR series makes bending, rotating and feeding operation automatically.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg Cedpfx Aljh Nrh Ueberg

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Cjdpfx Ajn Smclelborg Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: excellent (used), MRS 350 multi-saw Crsdpsp Audxofx Albeg - feed band width 35cm - max. cutting height 13cm - main engine 37kW - smooth adjustment of feed speed - max. saw size 400mm

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered Crodpfxjuddcge Albjg front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, functionality: fully functional, PROFILE BENDER FOMP Cedpfxsv Ifq Ej Alborg DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Codpjzwwvzsfx Alberg Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Codjzww Uqepfx Albsrg Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T 2 same plates available.

Condition: used, Year of construction: 1987, functionality: fully functional, Automatic metal pressing machine PNC digital playback system with monitor Type PNC 350 Manufacturer: Leifeld Technical data Center height mm 350 Distance between centers mm 825 Machine bed length mm 2,310 Spindle head Spindle motor kW 5.5 Spindle speeds (max) rpm 2,500 Tool holder Camlock Size 6 Press support PJ 35 Stroke, longitudinal mm 400 Stroke, transverse mm 250 Force, longitudinal kN 20 Force, transverse kN 25 Tailstock Stroke mm 500 Force kN 20 Hydraulic drive kW 7.5 Machine weight approx. kg 3,500 Additional equipment - Machining unit BAE II - Machining unit KA - Round counter holder Csdpfxozwx Ryo Alberg - Round centering device Application area Pressing, projecting, and retracting operations The machine is electrically connected and can be inspected at the warehouse in 59510 Lippetal-Lippborg.

Condition: used, Karton Former for Karton Sheets Cedpfozx Dflox Alberg 6x0.7l inside

Condition: excellent (used), mileage: 131,500 km, power: 110 kW (149.56 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, loading space length: 4,170 mm, loading space width: 1,650 mm, loading space height: 1,800 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, electric window regulation, sliding door, start-stop system, = Additional Options and Accessories = - 7-inch touchscreen - 12-volt socket - Attention Assist - Outside temperature display - DAB radio - Third brake light - Electric front windows - Entry step in rear bumper - Driver airbag - Cup holders - Keyless Go - Air conditioning - Front center armrest - Emergency call system - Reversing camera - Insulated glass - Two rear doors - Partition without window = Additional Information = Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Front axle: Steered Weights Unladen weight: 2,542 kg Payload: 958 kg Crjdozu Srxopfx Albjg GVWR: 3,500 kg Functional Body manufacturer: Carrier Xarios 350 Cooling engine: Diesel and electric Maintenance MOT (technical inspection): New TÜV upon delivery Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: 12 months Additional Information Please contact Lorenz Schoutteet for further information.

Year of construction: 2006, condition: used, The Ulma PV 350 flowpack machine is designed for packaging loose, difficult-to-handle, delicate, and wet products. It can be used for, among other things, leeks, carrots, fennel, celery, radishes, pak choi, peppers, Chinese cabbage, and even anthuriums. Top sealer Automatic product length sensor Suitable for transparent/unprinted film Double film roll holder, up to a maximum width of 1000 mm Pneumatic opening of the sealing rollers Digitally adjustable sealing temperature Self-centering, adjustable folding unit Credpfx Alozxi A Asbog Electronic speed control Temperature control for sealing bar and sealing rollers Infeed belt on the right side Built in accordance with European directives / CE marking Capacity up to a maximum of 50 pieces per minute, depending on the product. Digital (English) manual available. Upon request, this can be sent to you. Product dimensions Ulma PV 350: Length: Min. 60 mm – up to infinity, using a length indication photocell. Width: Min. 10 mm – Max. 250 mm Height: Min. 10 mm – Max. 235 mm Note: 2 units available.

Condition: used, mileage: 257,000 km, power: 125 kW (169.95 HP), first registration: 03/2020, fuel type: diesel, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,981 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Airbag, passenger side, Airbag, driver side, Trailer Stability Assist (TSA), Trailer socket, 13-pin, Audio/radio remote control on the steering wheel, Radio preparation, 4 speakers, Voice control and Bluetooth interface, Driver assistance system: Emergency call system, FordPass Connect incl. eCall, Smartphone interface (Apple CarPlay & Android Auto), Exterior lights, rear, top, LED, Exterior mirrors, electrically foldable, Window in sliding door, right, fixed, Vehicle without vinyl floor covering in the cargo/passenger compartment, Speed limiter, 130 km/h, Rear wing doors with glazing (opening angle 180 degrees), Rear window, heated, Interior mirror with automatic anti-dazzle function, Cold start package, 2nd battery, Cargo area light, LED, Cargo area partition, plastic with window, Mud flaps, front, Steel rims 6.5x16, Auxiliary heater package 1, Additional heater with timer, Remote control for auxiliary heater / additional heater, 2nd battery Cjdpfx Aljzu Dvvsbjrg Additional equipment: Storage compartment in the headliner of the cab, Trailer Stability Assist (TSA), Exterior mirrors, electrically adjustable and heated, Indicator in exterior mirror, Floor covering: Vinyl in the cargo/passenger compartment, On-board computer, Entry lights, Electronic brake force distribution (EBD), Electronic traction control, Heater with recirculating air function, Body/structure: High-roof box van, Body variant: Medium-high roof, Steering column (steering wheel) adjustable in height and length, Engine 2.0 Ltr. - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), Parking pilot system, front and rear, Wheelbase 3750 mm, Tyre repair kit, Low emission according to emission standard Euro 6d-TEMP, Gear/selector knob, leather, Windscreen wipers with intermittent function, adjustable, Sliding door, cargo/passenger compartment, right, Mud flaps, rear, Side protection strips, Seat package 13: Driver's seat (4-way adjustable) - passenger double seat, fabric, Seats in the cab: Driver's seat with lumbar support, Start/Stop system, Trend, Rear step integrated, Panelling in the cargo/passenger compartment: high, Panelling in the cargo/passenger compartment: Vinyl, Lashing eyes (10), Roll stability control (RSC), Heat-insulating tinted glass, Additional heater, electric, Second key with folding remote control

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Csdpfx Ajzvchtelbjrg Registration number: ON-68-FS

Condition: used, mileage: 20 km, power: 96 kW (130.52 HP), first registration: 07/2026, fuel type: diesel, wheelbase: 3,750 mm, color: white, number of seats: 3, construction height: 2,530 mm, working width: 2,059 mm, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, sliding door, soot filter, traction control, Automatic climate control, central locking with remote control, power-adjustable and heated exterior mirrors, power windows, on-board computer, driver assistance system: hill start assist, driver assistance system: lane keeping assist, driver assistance system: emergency brake assist, driver assistance system: lane keeping assist with fatigue detection sensor, cruise control, leather steering wheel, front and rear parking pilot system, rear view camera, spare wheel with regular tires, heated windshield, windshield wipers with rain sensor, daytime running lights, fog lights, audio system 13: digital radio reception (DAB/DAB+) with 4 multifunction displays, audio system: radio with USB and Bluetooth hands-free system, hands-free system, tinted heat-reflecting glass, anti-lock braking system (ABS), electronic stability program (ESP), driver's cabin seats: driver's seat with lumbar support, start/stop system, particulate filter, service booklet maintained, sliding door cargo/passenger compartment right, steel rims 6.5x16, seat package 8A: driver's seat (4-way adjustable) - double passenger seat - fabric, preparation for trailer coupling, electrical (socket and cable), paint: frost white, interior paneling in cargo/passenger compartment: high, driver's seat armrest, floor covering: vinyl in cargo/passenger compartment, interior paneling in cargo/passenger compartment: vinyl, headlight assistant with day/night sensor, driver assistance system: intelligent speed control, manual DPF regenerator, parking brake, electrical, cargo area light, LED, exterior rear lights, upper, LED, technology package 2, audio/radio remote control on the steering wheel, docking station (MyFord Dock), permissible total weight 3.50 t, body variant: medium-height roof, radiator grille with chrome strip, integrated rear step, trailer stabilization program (TSA), turn signal integrated into exterior mirror, cornering light in headlight, windshield wipers with intermittent function - adjustable, mud flaps rear, digital radio reception (DAB+), radio preparation - 4 speakers, FordPass Connect including eCall, roll stability control (RSC), storage compartment in driver's cabin headliner, air conditioning, heater with recirculation function, auxiliary heater, electrical, My Key (2nd vehicle key programmable), rear hinged doors (opening angle 180 degrees), door entry lights, lashing eyes (10), shift/selector lever knob, leather, electronic brake force distribution (EBD), steering column (steering wheel) adjustable in height/length, electronic traction control, driver assistance system: crosswind assist, Trend, body/structure: high-roof standard van, wheelbase 3750 mm, drive type: front-wheel drive, 6-speed gearbox, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer couplings up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Crjdpfszi T T Hsx Albeg

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ Credpfx Alswucm Aobog

Condition: used, functionality: fully functional, mileage: 256,188 km, power: 96 kW (130.52 HP), first registration: 05/2017, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,750 mm, color: black, gearing type: mechanical, number of seats: 6, loading space length: 2,430 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, Special equipment: - Passenger-side airbag - Tow bar: Fixed ball head - Towing capacity: 2,800 kg - Trailer Stability Program (TSA) - Body type/construction: Panel van with double cab - LED cargo area lighting - Metallic paint finish - Visibility Package 1 - Exterior mirrors electrically folding - Exterior mirrors electrically adjustable and heated ----- Further equipment: - 3rd brake light - Overhead storage in cab - Driver airbag - Traction control (ASR) - Drive type: Front-wheel drive - Audio system: Radio/CD player with multi-function display - Exterior mirrors electrically adjustable and heated - Integrated indicator in exterior mirrors - Floor covering: full rubber coating in cargo/passenger compartment - On-board computer - Roof lining in passenger compartment - Tachometer - Electronic brake-force distribution (EBD) - Electronic differential lock (EDS) - Driver assistance system: Hill start assist - Driver assistance system: Emergency brake assist - Electric windows - Alternator 165 A - Cruise control - 6-speed manual transmission - Grab handle on B-pillar - Rear wing doors without glazing (opening angle 180 degrees) - Heater with recirculation - Body type/construction: High-roof panel van - Body variant: Medium-height roof - Air conditioning - Silver radiator grille - Cargo partition behind 2nd row of seats - Steering column (steering wheel) height- and reach-adjustable - Headlight range adjustment Crsdpfx Aoxb Dmbslbog - Truck registration - Engine 2.0 L - 96 kW TDCi CAT - Fog lights - Front and rear parking sensors - Production site: Otosan - Wheelbase 3750 mm - Full wheel covers - Diesel particulate filter - Low-emission, Euro 6 standard - Sliding door, right, in cargo/passenger area - Wide side protection strips (side cladding) - Seat Package 13: Driver's seat (4-way adjustable) - Double passenger seat (fabric) - Driver's seat with lumbar support - Front armrest - Partially painted bumpers - Daytime running lights - Trend trim - Integrated rear entry step - Tinted windows - Half-height lining in cargo/passenger area - Immobilizer - Central locking with remote control ----- This offer is aimed at business owners, self-employed individuals, and commercial customers, such as car dealers or resellers who operate their own business. ----- The information provided here is a non-binding description and does not constitute warranted characteristics. The seller is not liable for input errors, data transmission errors, or mistakes. Subject to change and prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Codpozu Tv Eofx Alborg

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm Crodpfxjzlbpbo Albeg max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Codpfxoyilils Alberg Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.