Used Mit Drehteller Drehteller 285 Mm for sale (77,888)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Nwodpfxsykucms Ahkok Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: like new (used), functionality: fully functional, New feed hopper, approx. 11 m³ Inlet opening: approx. 4.0 x 2.4 m new steel structure with BRÄUER discharge chute Working area: 600 x 1,000 mm Njdpfxezvytgo Ahkjwk Drive with 2 unbalanced motors

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm Nwsdpfjzwwvzex Ahksk - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg Nwjdjzwpm Sjpfx Ahksk

Condition: ready for operation (used), KUKA rotor for 1FK7100-5AZ91-1ZZ9 - Z, with Kendrion 278835/17C / 86 61111H21 0001 brake and ETE Tyco T2J34-D309 / 170051690 / 5193070037 resolver, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwedpezwzwisfx Ahksk

Condition: used, empty load weight: 7,780 kg, maximum load weight: 28,220 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, had accident, | Knapen K100/KT01 Walking Floor Trailer | Remote Control | Operator Platform | Powersheed | BPW axles with disc brakes | 1 Axle Lift | Toolbox | Tare weight: 7780 kg | Valid inspection | Subject to errors, typos, and prior sale. Njdpfx Aezw Aw Rohkewk

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm Nwodezw E Ilspfx Ahkek -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H85 mm -Total weight: 10.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing Nwodpfezw E I Ejx Ahkek -Overall dimensions: 135/90/H75 mm -Total weight: 4.3 kg

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Nwsdpfx Aozbm I Nshkjk Superstructure: Roll-off container with double-wing door, approx. 20 m³, roll-off container with double-wing door, approx. 20 m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5 mm, walls made of 3 mm steel, spar spacing 750 mm, double-wing doors with reinforcement and Dutch door lock, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Nodpszbm Ngofx Ahkowk Body: Roll-off container with double-wing door, approx. 20m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5mm, walls made of 3mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: Roll-off container with double-leaf door, approx. 36 m³, with lashing eyes. ARCHIVE IMAGES. Standard roll-off container, external rollers greaseable and replaceable, floor 5 mm, walls made of 3 mm steel, stringers 750, double-leaf doors with reinforcement and Dutch door closure, all-around tarpaulin and net hooks, galvanized ladder rungs according to UVV regulations on the front, warning markings, RAL 7016 anthracite gray, with 2 lashing eyes on the front wall and 4 lashing eyes on each side! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nodpfx Ajzbm Ntshkewk

Condition: like new (used), Ideal for traverses 2700 mm. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale! Nwedpopu Amwsfx Ahksk

Condition: used, Lens housing Height 300 mm Distance 130 mm Foot width 50 mm Nwsdpfx Ascrczmohkjk

Condition: good (used), Splash guard Njdpfx Aoc U E Rtehkjwk Diameter 400 mm KKG 6 Height 100 mm Bayonet fitting

Condition: good (used), Grinding wheel Diameter 500 mm Inner diameter 105 mm Height 75 mm Cylindrical bore 105 mm Nwedpfx Ahec U E Rzjksk Pitch 5 mm 475 rpm.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Nedpjmhhx Ijfx Ahkjwk Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Nwodpfx Ahomhhyaekek - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Fully automatic roof tile machines with metal presses in tile appearance in desired sizes; Please contact us for additional information and technical documents. Nwsdpef Nqi Iefx Ahkok

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Required scope of delivery for the push-through safety device: 1x U-profile, used Material color: cream white Overall length: approx. 1,870 mm Profile dimension: U: 60 x 45 mm Material thickness: approx. 4.00 mm Weight/piece: approx. 9.57 kg including 2 swivel clasps Number of hooks: 4 hooks (hooks per clasp) 2x Locking pins, used Material color: Sendzimir galvanized Additional information: Racking system: Vogelsang Type: NS suitable for clear width: approx. 1,800 mm Overhang: approx. 65 mm Two original clasps are attached to the U-profile. With the help of these, the push-through safety device is hung into the upright and fixed with locking pins. Nedpfjhh Hu Uox Ahkewk The images regarding the assembly of the push-through safety device serve only to illustrate the material. The material colors may differ. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, We are offering 10 new sales shelving units for sale. Features: - Shelf height can be adjusted individually - Shelves can be installed at an angle (see images) - Castors for flexible storage - All castors are equipped with locking brakes, allowing storage on sloping surfaces - The base frame can be folded up, creating space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for various industries - Lightweight and easy to assemble Technical data and further information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm The scope of delivery includes: 10x sales shelving units, new each consisting of: 01x base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x back panel, new including stabilization hooks 04x locking castors, new including Allen key for assembly Nwjdpfxehu Apus Ahkek 02x shelves, new Depth: approx. 375 mm 02x shelves, new Depth: approx. 425 mm 01x instruction manual Please refer to the attached drawing for further details. Notes: The shelving unit is delivered in disassembled condition and must be assembled on-site. This is new merchandise; however, the packaging may have minor damage or dirt deposits, etc.

Condition: excellent (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,750 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight/piece: approx. 7.950 kg Note: The angles shown in the image are not part of the offer. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Njdpohvz D Hefx Ahkswk Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet (without unloading)

Condition: new, Technical data for the grating: Manufacturer: Gi-Ro Vreden Condition of the product: new (unused) Reason for return: incorrect order by end customer Included in the scope of delivery: 1x pressed grating, new (unused) Material color: hot-dip galvanized Overall depth: 1,000 mm (direction of load-bearing bar) Overall width: 980 mm (direction of cross bar) Load-bearing bar dimensions: 35/1.7 mm S355JR Slip resistance of load-bearing bars: no Nwjdpfx Ahok Ebq Tskjk Slip resistance of cross bars: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | per piece Internal designation: R

Condition: good (used), The scope of delivery includes: 1x support post, used Nwjdpfxek Uufxs Ahkek Material color: blue Overall length: approx. 1,660 mm Profile dimensions: U: 70 x 30 mm Material thickness: approx. 2.00 mm Number of boreholes: 02 pcs. Borehole diameter: approx. 11 mm Footplate dimensions: approx. 130 x 130 x 3.00 mm Weight / piece: approx. 3.570 kg

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Nwodpfx Aeq Am Ivjhkjk

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 15,540 mm Number of bays per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 600 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 75 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack crossbars, used Material color: sendzimir galvanized I-profile: 120 x 50 mm Beam type: SLI120/14 Agraffe: 5 HK Nsderuqfaepfx Ahkewk Clear width: 3,000 mm 40x locking pin, used Material color: sendzimir galvanized To secure the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.