Used Milling Recording for sale (10,887)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, mount diameter: 30 mm, total height: 1,800 mm, total width: 950 mm, total length: 2,000 mm, table width: 120 mm, table length: 420 mm, Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: presumably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm With 2 slots and a special EMCO vise Jaw width: 60 mm Travel distances: X: approx. 190 mm Y: approx. 140 mm Z: approx. 260 mm Bodsw Ivu Espfx Adrjli Including suitable mobile workbench with various matching contents Including 7-position tool changer, collets, and various suitable tool holders

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm Bjdeyaqgyopfx Adreli - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Drive rings: for attachment milling mandrel, 19 pieces -Type: Ø 13 to 40 mm Bledpfx Adezhkxkorji -Quantity/Size: see photos / parts list -Submission/Price: complete -Transport dimensions: 200/120/H80 mm -Total weight: 4.4 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg Bodpfx Adopix Nkereli

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos -Price/Fee: complete Bsdpozhkq Tsfx Adrjli -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, CNC control Heidenhain iTNC530 Bjdpsy Hqmhefx Adroli 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Bühler PML2 Premium Laboratory Stirred Ball Mill Manufacturer: Bühler LTD, Uzwil, Switzerland Type: FPML2 Premium / PML2 Premium Machine Type: Laboratory Stirred Ball Mill / Bead Mill Application Area: Process development, dispersion, and fine grinding at laboratory scale For sale is a laboratory stirred ball mill from Bühler. The PML2 Premium is a modular laboratory system for the development and optimization of grinding and dispersing processes at laboratory scale. The system is suitable for research and development work as well as small-batch trials of various products. Bljdpfxjzhkcpj Adrsi Application areas: Automotive OEM and refinish paint systems Anti-corrosion paints Industrial paints Color filters for display technologies Metal, ceramic and glass pastes Inkjet inks Liquid printing inks Liquid toners Agrochemicals Pigment concentrates TiO₂ dispersions Adhesives and sealants Technical data: Active grinding chamber volume: 0.2 - 1.2 dm³ Volume of grinding media tank: 2.4 dm³ Max. grinding media pressure: 7 bar Motor power: 2.2 kW at 3,000 rpm Rotor speed: 500 - 4,500 rpm Cooling water connection inlet: G 1/2" Cooling water connection outlet: G 1/2" Compressed air connection: G 1/4" Power connection: 400 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 16 A Machine dimensions approx.: 617 x 458 x 862 mm (W x D x H) Machine weight approx.: 150 kg Equipment: Bühler PML2 Premium grinding system Control panel / switch cabinet Grinding container system Pump units according to scope of delivery Piping and connections Existing documentation Further accessories as shown in the pictures Weights of the components: Machine: approx. 150 kg Hose pump: approx. 30 kg Gear pump: approx. 25 kg Laboratory hose pump: approx. 8 kg Attachable container: approx. 5 kg Tray: approx. 1.5 kg Condition: Used From a laboratory environment Optical condition as shown in the pictures Functional scope not fully tested Inspection possible by appointment Scope of delivery: Bühler PML2 Premium laboratory stirred ball mill Control cabinet Existing attachments Documentation Further accessories as shown in the pictures Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data and prior sale.

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Bodpfxslkbpzs Adrsli Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Bledpfxoy U R Rcj Adrei

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Bodpfx Adet T Rkdoroli Table 1000 x 1000

Condition: used, Year of construction: 2010, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, • Monoblock structure in welded steel with a mobile gantry in steel. • Processing speed up to 18 m/min. • Worktable: fixed table made of high-thickness aluminum profiles. • Hardened linear guides and preloaded ball-bearing carriages. • Transmission via precision ball screws on all 3 axes. • CN7000 numerical control with touch screen and brushless servo drives. • Available in 5 sizes for maximum flexibility. • Z 350 option for 3D applications. Blsdpsxxii Ajfx Adrji • Quality and performance suitable for good productivity. • Well-known ease of use. • Compliant with European safety regulations. • Numerous options: brushless servomotors, micro-lubrication, automatic tool changer, vacuum table (with turbine or vacuum pump), high-frequency spindles, contact engraving spindles, fourth axis.

Condition: used, Year of construction: 1976, x-travel 1200 mm y-travel 400 mm z-travel 460 mm table-size 1500 x 400 mm control konventionell tool adaptor SK40 turning speed range 45 - 2000 U/min quill stroke ja mm weight of the machine ca. 3,2 t dimensions 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system Bedezip H Nspfx Adreli - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 4,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 5,000 rpm, CNC SIEMENS 840 D WORKING AREA Longitudinal travel X axis: mm 16.000 Cross travel Z axis: mm 1.600 Vertical travel Y axis: mm 4.000 Rapid traverse rate: m/min 30 Axis acceleration: m/s² 2 Maximum axis thrust: N 16.000 WORKING TABLES No. 2 floor plates: mm 7.792 x 3.190 Rototranslating table: mm 3.000 x 2.992 Cross travel of rototranslating table: mm 2.500 Maximum load capacity at table center: Ton 60 SPINDLE Tool taper: ISO 50 DIN 69871 Spindle speed: Rpm 5.000 Power S1: kW 37 Power S6: kW 56 Maximum torque S1: Nm 1.295 Maximum torque S6: Nm 1.963 Usable low range: Rpm 0 – 1.145 Usable high range: Rpm 1.145 – 5.000 KOSMO 3 UNIVERSAL MILLING HEAD Positioning accuracy: ± 0.002° Maximum torque on rear plane: Nm 15.600 Maximum torque on front plane: Nm 11.000 Bjdpfx Aezipmpsdrsli Lubrication and cooling: Forced oil circulation Weight: kg 450 EQUIPMENT • Rueckle rototranslating table, size 3,000 x 2,992 mm, cross travel 2,500 mm, maximum load capacity at table center 60 tons, equipped with double preloaded pinion system; • Vertical axis designated as Y and cross axis designated as Z; • Remote electronic handwheel; • Automatic universal bi-rotary milling head “KOSMO 3 5000”, 5,000 rpm, ISO 50, indexing 0.02° on the front plane, continuous C-axis (hydraulic clamping) and 1° Hirth coupling on the rear plane, oil recirculation lubrication system; • Horizontal extension, diameter 200 mm, length 600 mm, 4,000 rpm, ISO 50 taper, continuous C-axis (hydraulic clamping) and 1° Hirth coupling; • Continuous platform (C-axis) prepared for future installation of a 2-axis continuous milling head; • Automatic head changer for the above-mentioned heads (Kosmo head, horizontal extension and preparation for continuous head); • Head storage magazine for 2 heads (Kosmo head + horizontal extension); • Air conditioning unit for electrical cabinet; • Belt-type chip conveyor along X-axis complete with transverse conveyor, coolant tank and coolant pump; • High-pressure coolant system, 40 bar through spindle, complete with tank and paper filter system, DIN 69871 type B; • Chain-type tool magazine with 80 positions “MAC80”, ISO 50, with tool change capability in both horizontal and vertical spindle positions (maximum tool length 400 mm, maximum tool weight 20 kg); • Air blast through external spindle nozzle; • Renishaw NC4 laser tool presetting system; • Renishaw RMP60 workpiece probe; • Mobile operator cabin moving along vertical and horizontal axes; • Instruction manuals and CE Declaration of Conformity.

Year of construction: 1993, condition: ready for operation (used), A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible. Bljdpfszipg Nox Adrsi

Condition: excellent (used), spindle diameter 35mm manual spindle lifting and lowering spindle rotation speed adjustable to 2900/4750/7750/12300 RPM star-delta starter Bodjzipbgopfx Adrjli

Condition: used, Year of construction: 2009, operating hours: 550 h, functionality: limited functionality, machine/vehicle number: 041, Bridge saw for marble and granite, with rotating and tilting table, new steel foundations for the bridge and table are available. Dimensions: 560 cm long, 460 cm wide, 300 cm high Weight approx. 6160 kg, disc motor inverter, Blsdpfx Ajzim Dledrsi work table with motor drive and tilt adjustment, linear shaping system, disc tilt for bevel cutting.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Sound insulation enclosure Motor power: 3 kW Grinding chamber dimensions: 220 x 170 mm Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Bjdpfozimw Ejx Adrjli Speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used!

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Blsdpfx Aozimqxodrei

Condition: excellent (used), SPINDLE 125 MM CNC FAGOR 8030 X=2000 Y=1800 Bsdpfx Ajzazpfodrjli Z=1600 W=800

Condition: new, Year of construction: 2026, CORMAK C1531 ATC CNC Router (1500 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. 2. HQD Spindle High-performance 5.5 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system for reliable, low-maintenance operation. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring outstanding machining quality at high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping for accurate and stable machining. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood The optional vacuum pump significantly increases workpiece holding force, preventing material movement during machining. Four independent vacuum zones ensure efficient and flexible workpiece clamping. Technical Specifications Parameter Value Working Area 1500 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 5.5 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Bledpfx Adoycuvqsrsi Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish language version) Machine Dimensions 2450 × 3800 × 2200 mm Machine Weight 2050 kg

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Bsdpfxevupu Ue Adrjli Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Bsdpjy S Tm Uofx Adrsli Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, Bsdpfx Adjzilwwjrjli 1519mm max turning length Renishaw Probing, swarf conveyor, A-Mist air filtration, FSE coolant filtration.

Condition: good (used), Circular platform for horizontal and vertical mounting. Bodpfjzhf Adjx Adrsli Diameter: 400 mm.

Condition: new, Year of construction: 2026, CORMAK IND 2131 CNC Router (2100 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with six independent vacuum zones, manufactured from rigid and durable HPL panels, individually controlled directly from the electrical control cabinet. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are equipped with sealing plugs, allowing efficient clamping of workpieces in various sizes. The table surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. The table is equipped with pneumatic positioning stops on two axes, enabling fast and repeatable positioning of workpieces in exactly the same location. 2. Spindle High-performance 9 kW brushless spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System High-efficiency YASKAWA AC servo drives, controlled by a digital CNC controller, delivering outstanding machining quality while maintaining high feed rates in all axes. Brushless YASKAWA AC servo motors drive the X and Y axes via precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives manufactured from hardened and heat-treated steel, ensuring long-term reliability and accuracy. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in superior surface finish and machining precision. 5. Automatic Tool Changer & Tool Length Sensor Equipped with a 12-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 2 pcs 3–4 mm – 2 pcs 5–6 mm – 4 pcs 7–8 mm – 2 pcs 9–10 mm – 2 pcs Bjdpfx Aevup Unsdreli Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Industrial CNC Control System The machine is controlled by an industrial SYNTEC CNC controller, commonly used in professional machining centres. Supplied with a handheld control pendant and LCD display. Optional UCanCAM V13 CAD/CAM software available in Polish and English language versions. Technical Specifications Parameter Value Working Area 2100 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System 1500 W Hybrid AC LEADSHINE servo motors Table Type Hybrid vacuum table Spindle Power 9 kW Gearbox Shimpo Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 7.5 kW vacuum pump with 8 independent vacuum zones Software Optional UCanCAM V13 (Polish/English version)