Used Messerkoepfe Cutter Head for sale (11,877)

Condition: good (used), Robot Coupe R30 Vertical Cutter Mixer Lhjdpfsz D Hw Sex Ab Aon Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Lhedpfx Abez D U Hns Aen Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Ljdpfx Abez Dtbwj Aohn Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Lhjdpsz Ht Ebjfx Ab Aon Air: 6 bar -8bar

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: Lhodpfjz H H A Tox Ab Ajn M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Max. planing diameter: 200mm Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Ljdjz H Iz Dopfx Ab Ajhn For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Lhjdpfx Ajz Ekd Eob Asn External reference: 8534

Condition: used, Uchida BC 10 Business Card Cutter The UCHIDA BC-10 business card cutter is a business card cutting machine that works in conjunction with any high-quality digital copier or printer to automatically, easily, and quickly produce professionally cut business cards. Whether you are a small business or a large corporation that produces hundreds of cards per day, the innovative features applied to the UCHIDA BC-10 will meet every need. • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type: Offset, coated, glossy paper Tolerance: ±0.1 mm Lhjdjivd Aijpfx Ab Ajn Item condition: used Scope of delivery: as shown (without sheet feeder & trash box) You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, IDEAL 1080 Krug & Priester Lever-Action Paper Cutter   Ideal 1038 paper cutter   - Tool steel blade with a sharpening angle of 75° - Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Lsdpfxjx R Scxs Ab Aehn - Re-sharpenable blade set made of Solingen knife steel - Complete with a sturdy base frame and foot pedal - Fold-out side table, right - Side guide with a measuring scale in mm and inches - Infinitely adjustable back guide with a locking screw - Front guide with a locking screw and narrow-cut device - Scale knob for precise adjustment of the front guide - Printed DIN format scale from A3 to A6 - Fixed, transparent blade guard made of shatterproof plastic and blade locking device - Particularly stable blade bearing made of aluminum casting and double-bearing blade shaft for precise cuts - Extremely robust metal construction - GS tested safety mark - Brand quality, Made in Germany - Cutting length: 800 mm - Cutting capacity: approx. 20 sheets (paper 70 g/m²) - 4 mm passage height - Table size (W x D): 605 x 800 mm - Dimensions (H x W x D): 1215 x 670 x 1080 mm - Width with fold-out side table: 890 mm - Weight: 55 kg   Item condition: new ideal 1038 paper cutter   You can find more paper cutters in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Factory No.: 4220 Lhsdjz Hfclspfx Ab Aon Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 3,900 mm, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, emission class: euro2, suspension: steel, = Additional options and accessories = - 1 fuel tank - PTO = Remarks = MAN TGS 40.480 6x6 BB SA Tractor Head | 480 HP | Euro 2 | Heavy-Duty The MAN TGS 40.480 6x6 BB SA is a heavy-duty tractor head for heavy haulage, machinery transport and demanding semitrailer operations. Its 480 HP MAN D26 Euro 2 engine and true 6x6 drivetrain provide a strong platform for specialised transport. Key Highlights - MAN TGS 40.480 6x6 BB SA - MAN D2676 D26 Euro 2 diesel engine - 480 HP (353 kW) - 2,450 Nm torque - MAN TipMatic 12.28 OD automated transmission - MAN G253 transfer case - True 6x6 drivetrain - Driven planetary front axle - Two driven planetary rear axles - Differential locks on all driven axles - Leaf / leaf heavy-duty suspension - 40,000 kg technical GVW - 64,000 kg technical GTW - Up to 90,000 kg Technical Load Plus GTW - JOST JSK 38 C 3.5" fifth wheel - 400-litre steel fuel tank Lhodpfx Aozl Uageb Asn Built for Serious Heavy Transport The TGS 40.480 combines high torque with a reinforced driveline, planetary axles and true 6x6 traction. The front axle can be engaged when extra traction is required on difficult access roads and unpaved surfaces. The MAN G253 transfer case provides on-road and off-road gearing with terrain reduction. Raised air intake, fuel pre-filtration and radiator protection support operation in hot and dusty environments. Applications - Heavy haulage - Machinery and equipment transport - Low-loader operations - Construction and infrastructure logistics - Mining and quarry support - Oil, gas and remote-site logistics Technical Specifications - Vehicle: MAN TGS 40.480 6x6 BB SA - Type: Heavy-duty semitrailer tractor - Drive: 6x6 - Engine: MAN D2676 LFBV D26 Euro 2 - Power: 480 HP / 353 kW - Torque: 2,450 Nm - Transmission: MAN TipMatic 12.28 OD - Transfer case: MAN G253 - Wheelbase: 3,900 mm - Technical GVW: 40,000 kg - Technical GTW: 64,000 kg - Technical Load Plus GTW: Up to 90,000 kg - Fuel tank: 400 litres - Cab: MAN TN Why Schaften Automotive? Schaften Automotive supplies factory-new MAN, Mercedes-Benz, IVECO and Scania commercial vehicles for international markets, with export documentation, custom body solutions, international transport and worldwide delivery. Contact our team for availability, export options and worldwide delivery. = More information = General information Year of construction: 2026 Cab: TN Technical information Number of cylinders: 6 Axle configuration Tyre size: 325/95 R 24 Brakes: drum brakes Suspension: leaf suspension Layout Number of berths: 1 Other information Engine type: in-line Availability: in stock Gearbox type: TipMatic

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats Lodpfx Aboz I Up Ro Ashn - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Lsdjz I Upqspfx Ab Aehn Engineered for Demanding Operating Conditions...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque Lhedpez I Uqhefx Ab Aen - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...

Condition: used, Used Machine Features and Technical Specifications: - Versatile copying router with extremely short setup times, both when transitioning from manual to automatic operations and when switching between a wide variety of automatic machining processes - The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces secured to a template past the milling tool - The automatic copying roller and pressure roller can be removed in a matter of seconds. This makes the machine available for manual production of one-off and custom parts - Distance between tool axis and column: 915 mm Lhedpfxszk N Tlj Ab Aen - Spindle stroke: 105 mm - Table stroke: 180 mm - Max. clearance between table and spindle: 300 mm - Tool holder: MK 2 - Spindle speed: 10,000/20,000 rpm - Table dimensions with extensions: 1,510 x 1,170 mm - Motor power: 4 kW - Motor power for template feed: 0.14 kW - Template feed speed: 1.5–12 m/min - Number of adjustable turret depth stops: 6 Dimensions: approx. 1,690 x 1,100 x 1,890 mm Weight: 650 kg

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Lhjdoxhfg Nspfx Ab Aen Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: good (used), Machine is in good working condition. Lhedpfjy Tm Stjx Ab Aen Repaired 2017. 6 speed, 2speed in mixing, 4150 rpm with vacuum, 4000 rpm without vacuum.

Condition: excellent (used), 1 piece HSS milling cutter various diameters Lsdpfx Aszw U S Tsb Aehn roughing and finishing cutter with diameters from 14 - 40 mm very good condition 17.5 kg

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Lhodpfx Abex Ap A Rs Ajn Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Year of construction: 1988, condition: reconditioned (used), Grinder type DURE Cel The grinder is designed for sharpening woodworking tools such as: circular, straight and helical tooth milling cutters; milling heads, circular saws with carbide blades, planer blades; chisels. It is used in vegetable sawmills for woodworking. Dure grinder Technical and operating data Lsdpeuuk Dtjfx Ab Aehn Supply voltage: ~3 x 400 V; 50 Hz Largest tool travel of the tool carrier: 660 mm Largest travel of the cross slide: 160 mm Largest horizontal travel of grinding head: 140 mm Rotation of grinding head in horizontal plane: 360° Rotation of the grinding head in the vertical plane: ± 30 ° Largest vertical displacement of the grinding head: 240 mm Spindle speed: 3500 or 6000 min-1 Overall dimensions of the sharpener (L x W x H): 1380x830x1460 mm Weight of the grinder (with accessories): 515 kg Largest diameter of sharpened cutters: 250 mm Largest diameter of sharpened blades: 600 mm Diameter of shanks of sharpened cutters: max. 20 mm Maximum length of sharpened blades: 640 mm Year: 1988

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Lhsdpsxv D Injfx Ab Ajn Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: used, Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE Lhjdpfowi Ixmjx Ab Aen

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Lhodpfjl Dw Nxsx Ab Asn

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain. Ledpfx Asz Hc Uleb Ashn

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Ljdpfx Absv Ax N De Ajhn Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! Shipping costs on request.