Used Landonio Landonio Tmu 1200 for sale (5,247)

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Bodsytb Eyspfx Acnodg Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: used, Used Morton-Lödige FKM1200D ploughshare mixer approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has (6) stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by an 18.5kW , 1450rpm geared motor through a Renold Ltd gearbox with 49/4 : 1 ratio giving approximately 118rpm output on the shaft. Unit has a pneumatically operated bottom entry discharge valve. Unit is mounted on a mild steel frame. Bsdpfoyw S R Nsx Acnsdg Dimensions: 1750mm x 1000mm

Condition: used, mileage: 1,001 km, power: 17 kW (23.11 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 3,800 kg, axle configuration: 4x2, number of seats: 1, first registration: 01/1990, suspension: steel, Year of construction: 1990, operating hours: 3,486 h, front tire size: 205R14C, driver cabin: other, maximum speed: 20 km/h, Vehicle location: Bovenden, leaf spring suspension Bodpsyzi I Hefx Acnodg Superstructure: Bitumen/tar sprayer with Hatz diesel engine 2L31C, approx. 3486 operating hours! Accessory information provided without guarantee. Subject to changes, prior sale and errors!

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm Bodpjz N Amsfx Acnedg weight: ca. 1800 kg

Condition: new, empty load weight: 340 kg, maximum load weight: 860 kg, overall weight: 1,200 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,260 mm, loading space height: 1,530 mm, tire size: 185/70r13, Low-loader with cover from the manufacturer ANSSEMS, model GTB1200 251x126 VT3. As standard equipment, the Anssems covered trailer with brakes features aluminum side walls, an aluminum cover with railing, a ramp, internal locking mechanisms, adjustable lashing eyes, profile channels for mounting accessories or securing the load, a support wheel, and a V-shaped drawbar. Financing: also possible without a down payment!!! Other sizes, equipment options, and more affordable models can be found in our shop: ----- You can also find all our cost-effective offers on our website. Germany-wide delivery possible (except to the islands)! Please feel free to ask us for prices. ----- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen. Tel: 0, Fax: Collection times: Monday - Friday – [time]. Bedpfxjf Nt Dxo Acnedg Collection is not possible on Saturdays!

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Bjdpfxog N Nl Ds Acnsdg Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Bdedpjgbdpkefx Acneg Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: refurbished (used), Year of construction: 1990, div. Chamber filter presses from Rittershaus & Blecher, Netzsch and Passavant to be handed over, plate format 1200 x 1200 and 1500 x 1500 mm, from 40 - 145 PP plates, content from 1000 - 4500 liters, length approx. 6 - 13.6 m, all presses have to be refurbished are then sold with a 1 year guarantee, a piston Membrane pump for loading can also be offered, location is 58762 Altena Bdodpfx Asgpxg Secnog

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm Bedpfegp Dyqox Acnedg weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Bdsdpfeguvtdex Acneg Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Condition: good (used), Year of construction: 2008, filter area: 400 m², filter pressure: 15 bar, pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, used Type: Passavant Application: sludge dewatering Type of construction: Bridge beam year of construction: 2008 Filter plate size: 1200x1200 Bdsdep S Nzhspfx Acnsg Number of plates: approx. 88 plus head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 400 m2 Press capacity: approx. 2550 dm3 Filter pressure: approx. 15 bar Drain: closed Pump technology: optional washing system: no Other: The plant is 2x in stock Application: Sludge treatment, dewatering plant. Filter presses are discontinuously working pressure filters for solid-liquid separation of suspensions. Purchase or rent: Rental or purchase. Inspection of the equipment in consultation with us around the plant.

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. Bdjdpfopk Iv Ujx Acnsg including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1450x2700x1450 mm Weight 350 kg Bedpfx Acjvz E Udenedg Total power requirement 3,5 kw

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l Bodpfx Acoxm Ullenedg - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Bdodpfexuwanjx Acnog Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Bodpfxexqfzrs Acnjdg Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,200 h, load capacity: 280 kg, overall weight: 14,660 kg, next inspection (TÜV): 03/2026, transport length: 9,280 mm, transport width: 2,490 mm, transport height: 2,750 mm, Equipment: UVV, !Only 1200 hours! Working height: 27.20 m Platform height: 25.20 m Drive: Hybrid Lateral outreach: 19 m Own weight: 14,660 kg Machine dimensions (LxWxH): 9.28 m x 2.49 m x 2.75 m Platform dimensions (LxW): 2.40 m x 0.90 m Basket payload: 280 kg Bodovvtirspfx Acnodg !Only 1200 hours!

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours Bdjdpfxjvd Ddcj Acnjg 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 Bsdpfx Aevgupuscnjdg The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti. Its model number is Form 1200 HM and it was made in 1994. Currently, it is in storage. The machine has safety features and comes with manuals.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, total height: 2,700 mm, table load: 3,000 kg, overall weight: 17,600 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 11,000 W, number of axes: 5, This 5-axis OMV BPF-4 1200 universal machining centre was manufactured in 1999. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this OMV BPF-4 1200 universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Table length: 2300 mm // table width: 930 mm • T grooves: 7 • Width t-slots: 18 mm • Groove spacing: 120 mm • Working feed: 0 to 12000 mm/min fast feed: 12000 mm/min Bodpfx Asx D R Hyscnsdg • Table distances: floor: 780 mm vertical spindle nose: 325 to 925 mm spindle nose horizontal: 410 to 1010 mm • Type: electric spindle iso 40 • Din: 69871 / compressed air: 6 bar • Vertical inclination: +170 degrees // horizontal inclination: +120 degrees • The bed has a weight of approx. 14000 kg Extra Information 360 degree swivel tableTable diameter 1000 mm, locked! The head can be moved in any direction and stopped at any position. Simultaneous movement is possible on the X, Y, Z, A and B axes, but not on the rotary table! Dimensions Machine Depth 4550 mm

Condition: new, 15000 kg height 790 - 1150 mm width 1200 mm ja 790 - 1150 mm 120 x 1200 mm Support trestle, assembly trestle, steel trestle, welding table, assembly table, steel trestle, work trestle - Our support trestles are characterized by their stable construction, high load-bearing stability, and indestructible service life. - Trestle support made of screen printing - Powder-coated in RAL 5010 gentian blue Bsdpex Ddaajfx Acnsdg - CE marking - Transport on request

Condition: used, Year of construction: 1999, Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Bdedpfew Nap Nex Acneg Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2016, -1- unused pressure plate for Krupp, O&K, Weserhütte ES jaw crusher EB 1200 x 960, dimensions approx. 1150 x 530 x 130 mm, wedge 70 mm Bodpowqf Dpjfx Acnedg

Condition: good (used), Year of construction: 2018, operating hours: 8,053 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, front tire size: 13/7-8-286, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Front tyre size: 13/7-8-286 Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good = Additional options and accessories = - Sideshift = Remarks = Flexi Bendi AC1200 – Year of construction 2018 – 8053 hours 7.85 meter lifting height – Electric narrow aisle truck with side shift Are you looking for a compact and versatile narrow aisle truck for efficient warehouse use? This Flexi Bendi AC1200 from 2018 with 8053 hours is electrically powered and equipped with a powerful 48V / 775 Ah battery. Thanks to the Quattro mast, sideshift and small turning circle, this truck is ideal for narrow aisles. With a lifting height of 7.85 meters and a lifting capacity of 2000 kg, this truck is suitable for various warehouse applications. The machine is in good condition, is CE-certified and is delivered without a battery charger. Bsdpfxjydprce Acnodg Specifications: Year of construction: 2018 Hours: 8053 hours Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 2.74 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 2x4 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW Bedpfoy Tvw Eex Acnedg DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)