Used Koppens Pr 400 for sale (24,995)

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Nsdpszh D Rmefx Ab Ajdc

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net Ndedpfxj Ad Aa Nj Ab Ajc plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), This pre-owned Jungheinrich Esmena pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial storage requirements. The modular high-bay racking is ideally suited for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow, painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 2 - Pallet positions: 162 incl. floor positions - Version: Used Jungheinrich Esmena DELIVERY SCOPE: - 019 x uprights (approx. 400 x 105 cm), pre-assembled - 072 x beams (approx. 270 cm) - 144 x locking pins Price: €3,530.00 net €4,200.70 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - We can also inspect existing heavy-duty racks from other manufacturers PLANNING & CONSULTING: Ndodpfx Ae Adtfceb Aoc Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether it's a new installation, modification, or expansion – we provide professional advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On-site, you can get a comprehensive view of our pallet racking, storage racks, and other solutions. Many systems are assembled and available for direct inspection. Our experts are happy to assist you with questions and personalized advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Ndjdpfxe Adt Iqe Ab Asc

Condition: used, GRIGGIO UNICA 400 professional sliding table panel saw, manufactured in 2014. Heavy-duty industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, cabinet makers, and woodworking production facilities. The machine features a robust construction and a sliding carriage designed for accurate cutting and squaring of wooden panels, MDF, chipboard, plywood, and other compatible wood-based materials. Main Features and Technical Specifications Manufacturer: GRIGGIO Model: UNICA 400 Year of manufacture: 2014 Machine type: Professional sliding table panel saw Njdps Ad I T Ujfx Ab Asdc Power supply: Three-phase, 400 V – 50 Hz Rated current: 15 A CE marked Tilting circular saw blade from 0° to 45° Electronic adjustments with digital displays Aluminium sliding carriage with crosscut fence Rip fence and adjustable positioning stops Workpiece clamping system and hold-down devices Overhead saw blade guard with dust extraction connection Front control panel with emergency stop button Scoring saw unit visible on the machine

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: Ndodpfx Aozii Akjb Aoc "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, it is equipped with a 210 spindle, but can accommodate up to 250. It does NOT have motorized tools. Ndedpfx Ao Ad R Rceb Ajc Heidenhain control system.

Condition: excellent (used), Year of construction: 2013, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic Nedpfx Aboz Nw H Ns Aedc Hours: 21229 h

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm Nsdpfxedkmihs Ab Aedc 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Condition: as good as new (ex-display), Year of construction: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22" LCD monitor with touchscreen, USB ports and integrated DigiSoft software - demonstration machine - Machine is powered on and can be inspected by appointment! Technical data: Year of manufacture: 2025 Max. bending force: 400 KN / 40 tons Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Average speed: 35.8 mm/sec Programmable programs / Programmable sequence bends: 50+5 (punching) Number of single bends / sequence bending: 16 Dimensions of the work table: 580 x 1230 x 925 (H) mm Tool fixing holes in the work table: 4 x Ø 80 mm Working height: 925 mm Oil tank volume: 40 l Motor power: 5.5 hp / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Extra-high bending height: 400 mm Cutting max. capacity 40 kg/mm (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm (mild steel): Ø 30 x 10 (thickness) Nodpfx Asyw Rxfsb Ajdc Straightening: 200 mm Two-die bending: Ø 60 mm Rotational bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm The following tools are included in the price: - Die holder extension H. 190 L. 85 mm – for DIGIBEND 160-360-720 -- 400-800 - Center pin (multifunction pin) D. 80 – H. 220, head milled for Digibend 160-360-720 -- 200-400-800 - Bending insert R. 5 – H. 200 mm – DIGIBEND - Single V-die, 80 mm. H. 200 mm. for DIGIBEND

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) Nodpfoz Rz Iajx Ab Ajdc total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.150 x 950 x 2.650 mm weight 1200 kg PLC control with stairs and an inspection/cleaning platform with a standard discharge conveyor + Bridge Breaker

Condition: good (used), mileage: 650,000 km, power: 294 kW (399.73 HP), first registration: 09/1999, fuel type: diesel, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1999, Equipment: ABS, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Leaf spring suspension - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Power take-off (PTO) = Further Information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Dual tires; Differential lock; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction gear: External planetary axles Ndjdpfxjz R T Tco Ab Asc Rear axle 2: Dual tires; Differential lock; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction gear: External planetary axles Number of cylinders: 6 Tipper: Rear Technical condition: good Visual condition: good

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Ndedpszimfvjfx Ab Aoc Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, machine/vehicle number: 141B, mileage: 715,402 km, power: 294 kW (399.73 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 7,232 kg, maximum load weight: 44,000 kg, overall weight: 19,000 kg, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 12/2026, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, air conditioning, cruise control, differential lock, electronic stability program (ESP), parking heater, power assisted steering, soot filter, traction control, MAN TGS 18-400 BLS – 4X2 – HIGH LX CAB – EURO 6 FIRST REGISTRATION: 06/27/2016 715,402 KMS ENGINE: 12.4 L – 400 HP EURO 6 COMPLIANCE AD BLUE HIGH LX CAB – ONE SLEEPER WHEELBASE: 3,600 MM AIR SUSPENSION (REAR) LIFT/LOWER VALVE ABS – EBS – ASR – ESC – AEBS – LANE DEPARTURE WARNING – HILL START ASSIST TIPMATIC AUTOMATIC GEARBOX, 12 SPEEDS ENGINE BRAKE DIFFERENTIAL LOCK 1 TANK Ndodpsz Sly Djfx Ab Aec AIR CONDITIONING NIGHT HEATER ELECTRIC WINDOWS AND MIRRORS ROOF SPOILER AND SIDE DEFLECTORS TIRES: 315/80 R 22.5 GVW: 7,232 KGS GVM: 19,000 KGS

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal milling machine WAGNER FCA 400 & 3-axis digital from a testing workshop - Year of manufacture 2008 - CE marking - 3-axis digital display - Travel ranges X/Y/Z 450x400x400mm - Fixed angular table 740x320mm - Automatic feed rates in all three axes - Rapid traverse - Speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical milling head with drilling quill - Safety handwheels - Coolant system - Horizontal counter bearing - Work light - Machine feet Ndodoz St Hqjpfx Ab Aec Dimensions: L x W x H 1.4 x 1.2 x 1.9 meters / Weight 1800 kg Errors and omissions excepted.

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, Equipment: crane, GLEICH VEHICLE CONSTRUCTION PR.+PL. ? ATLAS AK 190.1 ? 16.3M CRANE? ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2 UNITS AVAILABLE / 1 WITH FASSI CRANE / 1 WITH ATLAS CRANE Ndjdsx S Tmnjpfx Ab Aoc ----VEHICLE EQUIPMENT ----VEHICLE DATA GROSS VEHICLE WEIGHT: 16,000 KG OVERALL LENGTH: 7,450 MM ----CRANE PLATFORM MOUNTING POINTS: APPROX. 5.86 M ----CRANE SUPERSTRUCTURE ATLAS CRANE MODEL: AK 190.1 A4 YEAR OF MANUFACTURE: 1999 MAXIMUM WORKING PRESSURE: 300 BAR MAXIMUM LIFTING CAPACITY AT 2.2 M OUTREACH: APPROX. 6,550 TO 7,400 KG MAXIMUM OUTREACH: 16.3 M WITH APPROX. 710 TO 770 KG LIFTING CAPACITY CRANE OPERATED VIA SEPARATE DIESEL ENGINE ----BODY FLATBED WITH CURTAIN SIDE MANUFACTURER: Gleich Fahrzeugbau GmbH FLOOR MADE OF APPROX. 30 MM WATERPROOF BONDED FILM FACED PLYWOOD SIDE PANEL HEIGHT: 800 MM SIDE WALLS FOLDABLE AND REMOVABLE FIXED FRONT WALL REAR WITH DOUBLE DOORS AND BAR LOCKING MECHANISM LASHING POINTS INTEGRATED INTO EDGE PROFILE SUBFRAME MADE OF STEEL, AUXILIARY FRAME ACCORDING TO DIN EN 283 284 ----TARP/CURTAIN ROOF COLOUR APPROX. RAL 9010 SLIDING CURTAIN LIGHT GREY SLIDING ROOF, SIDEWAYS OPENING FRONT AND REAR ----INTERNAL DIMENSIONS LENGTH: 5.4 M HEIGHT: 2.57 M WIDTH: 2.49 M ----CONDITION UVV INSPECTION OF LOADING CRANE PERFORMED NO SAFETY-RELATED DEFECTS FOUND CRANE FULLY FUNCTIONAL CRANE REMOTE CONTROL AVAILABLE ----EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 – 2000 €) EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 € CUSTOMS EXPORT CLEARANCE (EXW) WITHIN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21 DAYS AUSTRIAN PLATES, EURO 1 VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € is required for sales to EU or third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! See more vehicles on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our listing, errors may occur. Some of these may be due to transmission errors in the systems of the various platform providers. Therefore, all specifications are made without guarantee and do not represent legally binding characteristics. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information provided for the initiation of a contract. All details are given without guarantee and do not constitute warranted characteristics.

Condition: new, Year of construction: 2024 Ndjdpfxsz S Dk He Ab Asc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, Beyeler hydraulic pressbrake Model PR 3 Year : 1999 Capacity : 3100 mm. x 150 ton Control : 3 axis Cybelec Cyb Touch 12 (Touch screen control built on the machine 2-3 years ago) Ndedpfez Sy Nxjx Ab Aec Many, many toolings Can be seen and tested after previous agreement

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 66 kW (89.73 HP), cutting height (max.): 300 mm, cutting width (max.): 400 mm, Equipment: CE marking, Horizontal thin-cut band saw with 3 stations Manufacturer: Allwin Type: AW-400-3 Year of manufacture: 2013 Horizontal thin-cut block band saw with 3 stations, originating from a parquet manufacturing facility. Suitable for cutting individual lamellas. Max. cutting height approx. 300 mm Max. cutting width approx. 400 mm Ndjdpfjzyx Epsx Ab Aec Approx. 22 kW / 30 HP per station Data partially estimated!

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Ndodpfxsz Sngme Ab Aoc Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. Normal signs of use resulting from operation are visible, but they do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y) Motor: 3-phase Frequency: 50 Hz Motor speed: 1360 rpm Output shaft speed: 77 rpm Nedpfx Aboz Sng Ho Ajdc Rated current: 3.05 / 1.76 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 16.15 kg Power factor (cos φ): 0.77 Country of manufacture: Germany

Condition: excellent (used), For sale: a Lenze geared motor with a worm gear. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with only normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, mixers, and other devices requiring a reliable drive with high torque. Technical specifications: Manufacturer: Lenze Motor type: DERA 071-22E Gearbox type: GSN04-1NHAR Power: 0.37 kW (50 Hz) Power supply: 3×230/400 V Frequency: 50 Hz Motor speed: 1400 rpm Output speed: 140 rpm Gear ratio: i = 10 Torque: 22 Nm Protection class: IP55 Insulation class: F Nedpfoz Sninox Ab Ajdc Manufacturer: Lenze, Austria Condition: 100% functional – tested. Normal signs of use. Sold exactly as shown in the photos.

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Technical data Manufacturer: EMK Ndsdpfx Aboz Slvro Aec Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Protection rating: IP55 Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg

Condition: good (used), Year of construction: 2008, operating hours: 6,065 h, load capacity: 1,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, Ausa CH - 150 H Rough Terrain Forklift, Triplo 400 Freelift / Sideshift, Kubota Diesel, 2008. A video can be sent via WhatsApp. Ndodpfx Abe Aayt Ss Aec We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 6,800 mm, total length: 7,000 mm, repeat accuracy: 0.03 mm, power of the servo motor: 2 W, HPM Autopos saw feed system 7000 – positioning/feed system with Imet BS 400 – NEW For sale: HPM Autopos 7000, a robust servo-controlled feed and positioning system for the automatic positioning of tubes, profiles, and other materials. This system is an enhanced version of the previous MKH system. Technical specifications: * Brand: Imet BS 400 * Brand: HPM Mechanical Automation * Type: Autopos 7000 * Condition: New / Demo * Length: 7,000 mm * Servo-controlled drive with rack and pinion * Siemens control system * 12.1-inch touchscreen Panel-PC * VPN modem for remote support * Robust, foldable material clamp * Steel frame with drip trays * Pull cord emergency stop * 200 kg load capacity per roller High accuracy Ndjdjz Syxyepfx Ab Aoc After installation, the machine is measured with a Renishaw XL80, and any mechanical deviations are corrected by means of a compensation table in the software. This allows us to achieve a repeatability accuracy of up to +/- 0.03 mm. A measurement report is included. Applications: Suitable for, among other things, circular saws, band saws, pillar drills, and automated sawing and drilling lines. The HPM Autopos can be integrated with both new and existing sawing and drilling machines. In this process, we can link the control and functions of the existing machine to our own HPM system. We also offer customized solutions for the overhaul, retrofitting, and expansion of existing machine installations. Everything is developed and realized in-house. Price on request. Please do not hesitate to contact us for a no-obligation consultation. We would be happy to discuss a suitable solution with you.