Used Khs Khs Innoket Kl2040/120-30 Lm Gt Cold Glue Labeler (2004) for sale (36,566)

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Rsdoifi D Tspfx Ahcjcf Delivery: EXW Székesfehérvár

Year of construction: 1992, condition: good (used), Arburg 120.530 circuit board This board is often sold as a spare part for older Multronica control systems. Rcsdpfx Ahozl T Ipocjf Used in injection molding machines for pressure regulation. Year of manufacture: approx. 1992.

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg Rodpfjxabpdjx Ahcocf range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Rjdjhygztjpfx Ahcecf Manufacturer: BOSCHERT, Type: K30-120 Very good condition, year of manufacture: 1994 Technical data Manufacturer: BOSCHERT Type: K30-120 Year of manufacture: 1994 Cutting capacity: 6 mm in St 40 / 4 mm in stainless steel Blade length: 200 mm Cutting angle: 30-120° Working stroke: 40 mm Table height: 900 mm Connection power: 6 kVA Weight: approx. 1600 kg Dimensions: approx. 1500 x 1200 x 1300 mm All information is without guarantee. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2013, functionality: fully functional, cooling capacity: 113 kW (153.64 HP), type of cooling: water, overall weight: 943 kg, total width: 2,100 mm, total length: 2,270 mm, total height: 1,330 mm, heating capacity: 117 kW (159.08 HP), Equipment: compressor, Used Carrier 30 RQS 120 air cooled chiller / heat pump on R410A. Complete with 3 Copeland ZP182KQE-TFD-604 scroll compressors, braced heat exchanger, Carrier PM 100-110mm fan - 50 Hz - 0,53/0,18 kW - 720/500 RPM, Mecasem OOPSG001171100C receiver with a volume of 23,5 liter and a control cabinet with a Carrier Pro-Dialog+ display. Specifications Brand: Carrier Type: 30 RQS 120 Product type: Water chiller / Heat pump Refrigerant: R410A Weight: 943 kg Dimensions: 2270x2100x1330 mm (LxWxH) Compressors: 3 Copeland ZP182KQE-TFD-604 Display: Carrier Pro-Dialog+ Number of fans: 2 Fan specifications: 50 Hz - 0.53/0.18 kW - 720/500 RPM Year of manufacture: 2013 Rcedpforlk E Nsx Ahcsf Quantity in stock: 1

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles Redpfoy Azu Ujx Ahcocf - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Rjdpfoxvpd Uox Ahcjcf Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Rcsdju E E A Tspfx Ahcjf Oil heating. Total power 21,7 KW at maximum. Very good condition. Available immediately.

Condition: new, Year of construction: 2026, For sale: various nozzles from Nozzitec - COLD JET. A quality. These nozzles can also be used on all COLD JET MICROCLEAN blasting machines. Redpeztkw Rjfx Ahcecf We have all the parts in stock for these machines. Contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Swing diameter over cross-slide: 450 mm Rsdjyx A Rvjpfx Ahcscf Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Weight: 6700 kg INCLUDES Chip conveyor

Year of construction: 2019, condition: used, Weights Empty weight: 1.500 kg Functional Lifting capacity: 200 kg Lift height: 3.000 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,8x1,58 Additional information Please contact Christian Theißen for more information Manufacturer: Emminghaus Model: Pionier 120-6-30 Year of build: 2019 Condition: Used Data: Max. lifting height: 30,00 m bei 85° Lifting capacity: 200 kg Platform dimensions LxW: 1,25 x 0,90 m Platform dimensions extended LxW: 2,08 x 1,32 m Support width: 4,00 x 4,00 m Transport dimensions LxW: 7,80 x 1,58 m Weight: 1.500 kg Special features: hydraulic drive via gasoline engine (grid-independent), rotatable on chassis, ball head coupling with 50 kg support load. Rodpfjzcp I Iox Ahcscf

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Rsdpfx Ahoyyxc Rocjcf

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Redezdgnbspfx Ahcscf Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: new, Year of construction: 2026, For sale: various ROTORS from Nozzitec - COLD JET. A-quality. Can also be used on all COLD JET and NOZZITEC blasting machines. Rjdpfxszt U Itj Ahcjcf We have all the parts in stock for these machines. Contact us. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) Rcsdpfx Ahezf A Ifocof • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Rsdpfx Aezdd E Rehcscf Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: good (used), Year of construction: 2006, production capacity: 18 unit/h, For sale: KHS mixer, capacity 18 m³/h, manufactured in 2006, model KHS INNOPRO CMX-18. Attached are photos of the mixer and its nameplate, as well as a schematic diagram of the pumps and valves. The machine will be available starting in October 2026. It is in good technical condition and currently operates without any problems. Net price (ex-works Gorzanów): 60,000 EUR. Rcedezu Ni Ispfx Ahcof

Condition: good (used), functionality: fully functional, Year of construction: 2004, operating hours: 624 h, power: 4.5 kW (6.12 HP), axle configuration: 2 axles, load capacity: 227 kg, lifting power: 227 kg/m, platform length: 1,170 mm, platform width: 760 mm, overall weight: 6,427 kg, construction height: 2,000 mm, fuel type: electric, tire size: 560 × 180 × 450 mm, tire condition: 70 %, wheelbase: 1,580 mm, ground clearance: 90 mm, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year: 2004 Operating hours: 624 Working height: 11.14 m Max. horizontal reach: 6.53 m Platform capacity: 227 kg Platform dimensions (L x W): 1170 x 760 mm Turntable rotation: 355° (non-continuous) Platform rotation: Yes, 180° Boom type: Articulating (knuckle boom) Jib: Yes (articulating jib ±139°) Power source: Electric (48V DC, 8×6V batteries) Four-wheel drive: No (2×4) Tyres: Solid / Non-marking Stabilisers: No Engine manufacturer: Genie / DC-electric drive Emission class: N/A (electric) Weight: 6427 kg CE certification: Yes === HIGHLIGHTS === Compact electric articulating boom lift with excellent manoeuvrability Working height up to 11.1 m and horizontal outreach 6.5 m Maintenance-free 48V battery drive with onboard charger Zero tailswing and 355° rotation Fully proportional controls and CE-certified === CONDITION === Excellent working condition – fully inspected, maintained and tested by certified professionals. Inspection possible upon request. === LOCATION & DELIVERY === Rcsdoxct Ecopfx Ahcof Located in Sittard, Netherlands. Worldwide delivery available. Price €12.500 (EXW / excl. VAT). The Genie Z-30/20 N is a reliable, fully electric articulating boom lift with a working height of 11.14 m and a horizontal reach of 6.53 m. With a compact width of only 1.19 m and zero tailswing, it is ideal for indoor use and tight spaces. Equipped with maintenance-free batteries, proportional joystick controls and full CE certification. Ready for immediate use and transport. === DELIVERY === Crane loading available on request for smooth transport. Flexible shipping options tailored to your destination and logistics preferences. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler Redezlqu Hopfx Ahcjcf - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: Rjdozqdibjpfx Ahcjcf absolute positioning measurement system.

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm Rcedpfoyv Ntxox Ahcof cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg Rcjdjzinanopfx Ahcof • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg The unit is ready for immediate shipment and is available immediately! Rcodpfx Ahsy Nif Iocof

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: Rjdpfxjwh U Avs Ahcscf - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Rsdpfx Aofv Hphehcscf Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg