Used Ipsen International Gmbh Push-Through Furnace System / Hardening Shop / Furnace for sale (93,665)

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE Hnedszz Sidjpfx Agtjt BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors Hnedpfx Agenh R Sujtot - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 400 mm, conveyor belt speed: 4,000 mm/s, total width: 1,060 mm, total height: 1,800 mm, overall weight: 350 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 10 A, Equipment: documentation/manual, emergency stop, Inside width: 400 mm Length: 2000 mm Hnedpfjxuq Dgsx Agtst Driving power: 3 kW Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz Hsdpfsyn Emqex Agtont -Weight: 410 kg -Documentation, CE declaration Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Hodpfxoxcb Hno Agtjnt Max temperature: 1000°C

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2026 completely new PLC machine control (no pitney bowes control) Operation via color touch panel Hnedpodyk Sdjfx Agtst electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Hedpfx Aoz Ag Rrogtont - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Hnodpfez Agv Ujx Agtjt - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm Hnjdpfxsz Agw Ee Agtot - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Hnodpfx Asxy Iikjgtjt Available immediately

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Hnsdszzw Uljpfx Agtet Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Hnedpfendn Agsx Agtet Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 1985, condition: used, Hardening furnace, Heraeus Hjdpfx Agsgtxuqjtont Type KM 260 Width 250 mm, height 150 mm, depth 500 mm Temperature up to 1150 °C

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. Hnsdpfx Agoytrpvotst The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Hjdpfjzntfmex Agtjnt With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Year of construction: 1991, Total power: 22 kW Operating voltage: 380 V AC Operating current: 46 A Frequency: 50 Hz Pneumatic pressure: 4 bar Water pressure: min. 3.5 bar Transport and loading can be organised throughout Europe at extra cost upon request. Hsdjzvflhepfx Agtont Prices excl. VAT Inspection by appointment is possible. Please contact us, our team will be happy to assist you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2022 completely new PLC machine control (no pitney bowes control) Hnsdpfx Agodyk Sajtjt Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Hnjdpfx Aszxgtfegtot Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Hjdpfx Ajzz Rpcjgtent - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg Hedpjv Tdkbofx Agtent As-new condition

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Hnjdpfonfvx Nsx Agtjt A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Hedpfxjxy Idhe Agtsnt Available immediately

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Hnodpozcyq Hjfx Agtst

Condition: like new (used), functionality: fully functional, Z1015201800 Hodsxy I D Uopfx Agtont Z1010880270 etc.

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27 Hsdpfx Ajxy Imiogtjnt