Used Induction Electric Wok Nayati for sale (31,385)

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Isdpovy Aipjfx Apceig Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Isdpox R A Tnjfx Apcoig Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Iijdoy Nmdnjpfx Apcjg Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Control cabinet, floor-standing cable rack with glass door Manufacturer: Schneider Electric Iisdpfx Asxcxw Dspcog Condition: used, very good Size: 59.5 x 60.5 x 191 cm More pieces in stock.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, gearing type: other, battery capacity: 475 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,654 kg, total height: 2,140 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 PH-02 / 386 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.140 mm Closed height: 2.140 mm Free lift: 1.500 mm Mast: Duplex (2F314) Fork length: 1.000 mm Fork carriage: 2A Drive: Elektro Battery: 48V/475 Ah (2015) Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18x7-8 (40%) / 16x6-8 (10%) Service weight: 3.654 kg Length: 2.200 mm Width: 1.100 mm Year of manufacture: 2015 Operating hours: 14.180 h Condition: in need of repair EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Iisdpsz Aqt Rofx Apcjg Internal no.: 1308362 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Ijdpfxez Aa Ece Apcsig Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2022 - Serial number: 13180 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Iijdpfx Ajz Aa E Njpcjg Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, functionality: fully functional, machine/vehicle number: 71302488218, power: 45 kW (61.18 HP), rotational speed (min.): 1,475 rpm, rotational speed (max.): 1,770 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 330 kg, protection type (IP code): IP55, EMK electric motor, model KQMTG225M-4B3E2K, axle height 225 mm. Iiedpsz Akrgofx Apcsg

Condition: used, functionality: fully functional, machine/vehicle number: 515xxxxxxxx, Year of construction: 1998, operating hours: 58,791 h, load capacity: 1,000 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, fork length: 1,000 mm, empty load weight: 1,545 kg, total length: 1,611 mm, drive type: Elektro, construction width: 980 mm, Electric three-wheel forklift Chassis number: 515xxxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Impulse Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Ijdszif R Rspfx Apcjig Rear tire type: Solid rubber Battery voltage: 24V Battery type: PzS Description: The unit is operational but is sold as is, as received from the customer. The unit has defects and is sold without any warranty/guarantee. The forklift has NOT been refurbished and has NOT been inspected according to UVV regulations. Sale only to dealers! Impulse control, full free lift, hydraulic steering, hour meter, discharge indicator, 24-volt battery (year of manufacture, Ah, and weight unknown), external charger included.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250009, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment! Iiodpfjz Dh Ifsx Apceg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 11,340 h, load capacity: 1,200 kg, lifting height: 2,950 mm, fuel type: electric, mast type: telescopic, construction height: 1,810 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 895 kg, total height: 1,810 mm, total length: 1,800 mm, total width: 800 mm, fuel: electricity, LINDE L 12 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.200 kg Lifting height: 2.950 mm Closed height: 1.810 mm Mast: Standard (2W292) Fork length: 1.150 mm Drive: Elektro 24V Iiedpfjz Aqfmox Apcjg Battery: 24 V Charger: Einphasig 24 V 30 A not tested Tyres: Polyurethan V Service weight: 895 kg Length: 1.800 mm Width: 800 mm Year of manufacture: 1997 Operating hours: 11.340 h Condition: ready to drive EQUIPMENT Pulse control Internal no.: 1309229 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 18,435 h, load capacity: 1,800 kg, lifting height: 4,740 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,352 kg, total height: 2,150 mm, total length: 2,100 mm, total width: 1,150 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-18 / 6213 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.740 mm Closed height: 2.150 mm Free lift: 1.470 mm Mast: Triplex (3F474) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro Battery: 48 V/625 Ah (2015) Charger: ohne/without Tyres: Superelastik 200/50-10 (20 %) / 15x4,5-8 (40 %) Service weight: 3.352 kg Length: 2.100 mm Width: 1.150 mm Year of manufacture: 2008 Operating hours: 18.435 h Ijdpfx Apez Aqubscoig Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1308796 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Iodpfx Ajzmqv Hspcoig Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,154 h, load capacity: 4,500 kg, lifting height: 5,980 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 2,000 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,082 kg, total height: 2,800 mm, total length: 2,950 mm, total width: 1,400 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-45 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.500 kg Lifting height: 5.980 mm Closed height: 2.800 mm Free lift: 1.870 mm Mast: Triplex (3F598) Fork length: 2.000 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V/930 Ah (2015) Charger: 80 V - not tested Tyres: Superelastik SE 355/50-15 (25%) / 21x8-9 (15%) Service weight: 7.082 kg Length: 2.950 mm Width: 1.400 mm Year of manufacture: 2010 Operating hours: 15.154 h Condition: ready to drive EQUIPMENT Iodpfx Aez Aqirepceig 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1309115 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 1989, operating hours: 3,536 h, load capacity: 2,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, empty load weight: 3,500 kg, mileage: 3,536 km, Obtained through trade-in. Electric three-wheel forklift. Make: Hyster. Year of manufacture: 1989. Capacity: 2,000 kg. Lifting height: xxx. Mast height (extended): 2,200 mm. Hours on the meter: 3,536. Freelift. Battery: 2022. With charger. Watch the video on YouTube. Ijdpfx Asz Dg Ecjpceig

Condition: used, Year of construction: 2007, Planetary mixer, Tonelli M 120 Year of manufacture: 2007 Condition: functional Siemens control system Iiedpfjz A Sc Rex Apcog Mixing bowl capacity: 120 liters Includes 2 mixing bowls Includes 2 tools Accessories available upon request and subject to availability.

Condition: used, Year of construction: 2003, Planetary mixer Tonelli M 120 Year of manufacture: 2003 Condition: functional Siemens control system Tank capacity: 120 liters Includes 2 mixing tanks Isdpfoz A Sc Dsx Apcsig Includes 2 tools Accessories according to choice and availability

Condition: refurbished (used), Automatic line for forging / hot stamping Iedpfjzcdluex Apcjig Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Planetary mixer Rego P 50 Condition: used, functional Robust and precise planetary, mixing, and kneading machine Iedpfx Apez A Suajcoig Stepless speed control via lever Height adjustment via hand crank Timer Stainless steel safety guard with safety sensor Bowl lighting Includes 50-liter bowl and kneading tool

Condition: excellent (used), Year of construction: 2022, 537 USED Miwe Condo electric deck oven with 10m2 baking area. Isdpfx Apjzz S D Ueceig EXTERNAL DIMENSIONS (in cm): - W: 161 - L: 260 - H: 240 INTERNAL BAKING CHAMBER DIMENSIONS (in cm): - W: 120 - L: 167 - H: 15,5 - H of top chamber: 20 TECHNICAL DATA: - year of production: 2022 - baking area: 10 m² - thermal power: 66 kW Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Year of construction: 2021, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. • working width: 1,550 mm • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Additional equipment Iedpfx Asy Ifrzopcsig • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release Iijdpfjxv Dywox Apcog The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: like new (used), Year of construction: 2024, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 574525, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, total length: 3,500 mm, total width: 2,100 mm, table load: 500 kg, Gantry Eagle 400 including MultiChange Light handling system, year of manufacture 2024. Serial No.: 574525 Serial No. handling system: 583328 Total weight approx. 6000 kg including handling system Commissioned: 04/2024 Accessories: MultiChange Light handling system, 70 electrodes and 8 pallets The machine is being sold on behalf of the owner. Ijdpfx Apoz Dazdscsig Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailor-made financing options that are adapted to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Iisdpfxswd I Svj Apcog Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: used, Year of construction: 1996, Planetary mixer Rego PM 100 EP Bowl size: 100 l Memory computer with recipe management Electrical speed control Electrical bowl height adjustment Digital time and speed display, as well as electrical automatic shut-off Tool quick-change system Includes: 2x bowls, 1x beater, 1x mixing whisk, 1x flat stirrer, 1x kneading spiral Ijdpfx Apjz A R Tzeceig