Used Ici Caldaie Sixen 4000 for sale (2,660)

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Bwjdpfx Aew Azu Ijlbst

Condition: ready for operation (used), Year of construction: 2019, Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible. Bsdpsvdu Ixefx Albowt

Year of construction: 1965, condition: ready for operation (used), Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible. Bwjdpewxxv Uefx Albst

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Bsdjy Uydlspfx Albewt

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Bodpfx Alsxxa T Esbjwt

Condition: ready for operation (used), Year of construction: 2007, A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible. Bedpfjv Ubpqox Albewt

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey Bjdpfx Asv N Iuielbewt

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Bwodpfxey I Iz Es Albst If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min -Roller width: 250 mm Bjdjzq Abcspfx Albewt -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm -Weight: 328 kg

Year of construction: 2003, condition: good (used), Size: max 370 x 320 x 50 mm, min 140 x 105 x 2 mm Mechanical speed: 4.000 c/h Equipment gathering machine: • 2 additional handfed stations • Wohlenberg Sprinter 7009 • 16 stations • missing sheet and double sheet control • criss-cross delivery perfect binder • 15 clamps • spine preparation station • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • pile cover feeder • plates-chain transport • conveyor system • trimmer Wohlenberg 44 FS 50 standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools Bedpfx Alolzh Dijbowt • 1 spare part catalogue

Year of construction: 2000, condition: ready for operation (used), Built in 2000 Size max 370 x 320 x 50 mm min 140 x 105 x 2 mm Mechanical speed 4.000 c/h Equipment gathering machine: • chain tensioner with hand fed • Wohlenberg Sprinter 7009 Bedpjd H Ukdefx Albjwt • 12 stations perfect binder • 15 clamps • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • rotary cover feeder • belt delivery • lay down device • conveyor system optional equipment---not included--- • three knife trimmer • PUR gluing unit

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Bsdpfx Asw Ngd Tjlbowt Automatic universal head, 0.02 degree in both axes Machine will be refurbished in 2025

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Bwsdpfx Alew Ngm Usbjt

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Formats: 330ml standard, 440ml standard, 500ml standard (CAN)Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. T... Bjdpfxjy Ef Tmj Albjwt

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840 D-SL, rotational speed (max.): 16,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, Heller FP 4000 + SCHULER LoadMaster Compact Year of manufacture: 2013 Control system: Siemens 840 D SL Operating hours: approx. 40,000 h Spindle hours: approx. 20,000 h Spindle: SCU 63 unit, 16,000 1/min, 40 kW, 80 Nm X-axis: 800 mm, Y-axis: 800 mm, Z-axis: 1000 mm Bwjdpfxoztmhlj Albjt 4th axis (table/C-axis): NC rotary table, pallet size 500 x 630 mm 5th axis (head/B-axis): Swivel milling head (swivel range approx. +15° to -105°) Rotary table: 360,000° x 0.001° Power dynamic: 60 m/min 2x pallets GRM with DIN hole pattern Tool holder: HSK 63 A Wireless measuring probe, manufacturer: RENISHAW Tool magazine: 240 positions (chain type) PMS multiple clamping Chip conveyor for wet machining - Monitoring + collision detection Fast drill breakage detection NC rotary table Special design KMA Interface for extraction system Schuler Loadmaster Compact: LMC 900/FP4000 19x additional pallets with DIN hole pattern Siemens control system Available very soon Loading and disassembly possible

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. Bwsdszp H R Espfx Albjt This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm Bwodpfezpzblex Albst z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 100,000 kg, year of last overhaul: 2025, ATTENTION: The machine is currently disassembled. Individual components can be inspected. Before delivery in 2026/2027, the machine will be completely overhauled mechanically and electrically. Bwodjw H Ag Tjpfx Albot Pressing force: 4000 kN Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Stroke rate: 15 - 60/min Working height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New control system: SIEMENS S7 1500 series

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted Bjdpevwgm Hofx Albswt The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t Bjdpfjym D E Aox Albowt dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - adjustable cutting gap - number of strokes depending on cutting length approx. 20 - 25 per minute - rear stop with positioning control ELGO 10 - 750 mm - cutting length adjustment Bodsibmaxjpfx Albjwt - hydraulic clamping device - front angle stop - front support arms, laterally adjustable - drive 400 V / 15 kW - foot pedal - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg Bwodpfxshcnhmo Albet - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: refurbished (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products new drum and pistons SKG54-AKG75 weight range 25-160 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2026 Bodpfxeyidu Hj Albowt compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 15 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Fork width: 180 mm Fork thickness: 70 mm Mast type: Triplex Condition: As new Technical condition: Good Front tyres type: Polyurethane Front tyres size: Tandem load wheels Rear tyres type: Polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery year: 2022 Battery condition: 80 - 100% Bjdozrcthopfx Albswt Load backrest, Battery compartment rollers DIN160A Schaltbau battery connector Activation via PIN code

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t Bjdpfx Alezmy Tbebjwt required space 16000 x 5000 mm